ford 1520

There are a couple 4wd 1520's available locally, but they don't have loaders. There also happens to be a small loader for sale independently. I'm considering picking up a tractor and this loader with plans to marrying the two. I wanted to get some insight from those who are more familiar with...

Looks like I am needing to replace the clutch. Do I need to drain the hydraulic fluid before splitting it. It seems to be a generic note when working on the tractor. My fluid is still clear and I hate to waste it. Any ideas? Thanks

Hello, I have a 1987 Ford 1520 that's developed a leak at the right wheel on the inside. I have not pulled the wheel off to check on it I am hoping it could be a seal. Does anyone know if there is a wheel seal in there? I have a front-end loader that I installed and it has not been abused but...

CNC machined adapter plate for auxiliary hydraulics info

Looking for information on Ford tractor 1520. What is the good, bad and the ugly?

What is power beyond on my tractor? How can it be used? I would like to add a 3rd hydraulic function- can it be used for that? If so, how would I be able to control the hyd. fxn.?

What is power beyond? How is it used

An unusual question: Is the PTO shaft end cross bored so as to add a pin-on type extender/adapter? My tractor is about two hours away and in preparation for my next trip to camp I was deciding on a type of adapter to make up for the added length for the Pat's quick hitch. Thanks

I have a 1995 Ford 1520 HST but it will not start. Ran fine on Sunday, turned it off to take a break, came back & now I've got nothing. No lights on the dash, no relays picking up or solenoid engaging. I did have two separate times where the dash lights came back on & relays picked up, but as...

Can't say if the belt has ever been changed. Looks like I would have to remove the fan and radiator to replace the belt. Is that correct? Is there anything more to it than unbolting whatever I need to for removal? I have removed radiators and fans in cars and trucks but not this tractor. I...

I'm posting this on the off chance it happens to someone else. I couldn't find any similar situation documented anywhere online. In the +15F afternoon sun yesterday, I decided that among my other preparations for the slush-plowing event that is imminent here in PA this evening, I would pull...

Anybody know what the ACS valve option is. I'll post diagram. Any help is greatly appreciated. from the parts manual.

Looking for advice, I need a front loader for my 1993 Ford 1520. Does anyone know what model will it, or where I can find one?

Totally rusted out and battery falling out. Is there a replacement part for this? I looked online and can't seem to find one for anything older than Ford / New Holland 2000 series.

Whats a Ford 1520 worth with loader & finish mower?

I posted a lengthy explanation of my question on Owning/Operating and I am hoping my error was posting it there rather than here. 1989 Ford 1520, replaced alternator with exact replacement but found the T-shaped connector for the back had broken apart (31 year old plastic). Two wires are...

My Ford 1520, 1989 vintage, had a catastrophic alternator problem solved with new belt, new alternator, other assorted bits and pieces. It appears that the alternator was original, and I have replaced it with an exact replacement part. The problem is that the plug on the back of the alternator...

I have a question and believe that I know the answer. I'd just like help confirming. After owning my tractor for 6 years, I finally decided to change out the hydro fluid/filters myself. Prior to that, I had the dealer do it every other year and I handled the engine oil/filter and fuel filter...

1984 Ford 1520 has begun making a noise at the front of the tractor (by my ear it sounds like it is coming from there) near the fan and radiator when rpms are increased. Hard to describe. Not a knocking. Not continuous. Something maybe rubbing. The fan doesn't seem to be hitting anything...

Replace my 30 year old Ford 1520 4WD compact with Kioti CK2610H ? I like my tractor. It doesn't burn oil. The turf tires do GREAT on ice & snow. The dealer says he'll give me $7,550.oo in trade on his $29,950.oo CK2610H w/ new snowblower, tax, & delivery @ $24,248.oo I told him we were...

hi, i just purchased a 757c attachment with sub frame, it was shipped too me, everything is with it except the rear saddle bracket that mounts under the rear end, that the subframe slides into. im looking for one,,,,, or at least some good close up pics and measurements, so i could fab one...

I am having to change the what I believe is the hydraulic fluid filter on my mom's Ford 1520. It is the filter under the seat on the right side. We can't find the manual for it. Going to get one. But I have the filter and some fluid. I think the fill port is under the metal plate between my...

I'm hoping this is an easy question. I am trying to connect a FEL to a Ford 1520. The loader has 2 hoses that need to connect to the hydraulic manifold diverter valve on the tractor, but the tractor has 3 ports. I believe they are labeled inlet, outlet and maybe return. Does anyone know that...

I was just plowing a little snow, tractor working perfectly, all of a sudden it stopped moving. It will not go into forward or reverse. PTO, hydraulics working fine. Any ideas what is wrong? thanks Ray

Hello, After a long absence from this site, I have returned for some good advice. For personal reasons I had to sell every thing I had which was a Kioti DK45S, 6' mower, Loader, Pallet forks, box grader, angle blade and tire chains. So now Im in the market to start over and have run across a...

I have a Ford 1520 and have owned it for years. Never an issue. Well taken care of. We only put around 50-100 hours a year on it. The battery finally died so I picked up a new one but the grounding cable wasn't quite long enough so I decided to move the strap until I could get a longer unit...

I bought a used '86 ford 1520 tractor with FEL and 3pt backhoe attachments. The tractor has run perfectly for about 100 hours so far - the other day when I was raising the FEL and returned the control stick to neutral, the hydraulics felt (sounded) like they were still under load. The engine is...

Hello all, my Ford 1520 (1989 vintage, diesel, 4WD, Hydrostatic trans) has been pretty dependable for years but now is giving me a problem that has me stumped. I "think" it started about a year ago, with a few infrequent episodes. For a cold start I turned the key to the left for the glowplugs...

Hi peeps, Newbie on a Ford 1520. Hope to share and learn a lot.

A friend of mine has passed away and trying to help his wife sell some stuff. This is a Diesel tractor 1600 hours with a 5' Taylor Way Field General I have been trying to see what to ask for this? She also has a Woods 5' rear blade? and a house and 10 acres in West Tenn Any Ideals? Thanks

Hello, I hope this post isn't too redundant, but I did do quite a bit of searching before posting. Not exactly sure I am using the right language though so I am asking here. I have an old hay wagon with a hoist. It is a single acting cylinder and my tractor currently has a loader installed...

Both seem to be right size for my needs Both have FEL Ford 1520 a little more HP 2006 TC18 is at $8000 FEL 1700 Hours 1520 (Do not know year yet) $10,500 FEL 1200 hours These are the two in my area at moment, not really set on any one brand just no Kubotas or JD at moment

Here is what is posted: Ford 22HP Diesel Tractor with front loader. Exec condition 1200 hours. $10,500 . Other compatible implements sold separately : Merry Mac EPH-12 Chipper Shredder $1200, Loftness 48" Snow Blower $1700, Howard HR6 Rotovator Rototiller $1200, Gannon Box Scraper $450 Cash or...

My father is wanting to put a front loader on his 93 1520, every since I brought my Workmaster 40 with a front loader over he has to have one. So I talked to a new holland dealer about the 110TL for it, he told me it wouldn't fit which I don't understand why since the 1520 was pretty much the...

Good day tractor by net forum. I have a 1520 3 cylinder diesel. The steering cylinder has a bent shaft and leaks. Where can I find a used one?

i have a 1993 ford 1520 hst 4x4, and I have numbers for the air, fuel and engine oil filter, but don't have numbers for the two hydrostatic oil filters, can anyone help out, local tractor dealer moved out and never paid attention to the numbers napa numbers would be real helpful

Once warmed-up tractor powers out (any gear and/or throttle speed) - can't even go up to full throttle in neutral and will likewise power out, just lifting empty front bucket. If left just idling for some time, it may clear up temporarily but comes back. Kind of sounds like a fuel starvation...

Ok, happy new year! I have found absolutely nothing on this anywhere. On my late 1980's ford 1520 with about 600 something hours on it I have a problem. Diesel fuel is leaking into the engine oil. I don't know how fast it is leaking but it is in fact diesel fuel. I checked the oil like I always...

I have a 1988 Ford 1520 hydrostatic transmission that does not want to return to neutral completely. Can anyone tell me how to fix or adjust?

I have a 1520 ford hst. When the hydraulics warm up it loses all power for the drive system in all three ranges.the loader and three point all work fine. The fluid is full . any ideas?? Thanks for the help..

Hi All, I just picked up a 89 ford 1520 with loader and mower with 1580 hours on it. In the dog house with the wife but owell. Any way when it comes fall time i would like to remove the deck how Easy is this to do? And any known problems with this tractor i should be on the look out for in...

Hello everyone, I did quite a bit of searching on the forum before I decided to post and didn't come up with much info. I have a Late 1980's Ford 1520 hydro with 7108 Ford Loader. I recently picked up a Ford 758A backhoe attachment at a really good price. Unfortunately it came without the...

Need to Drain Tank Fill pipe go's under Dash I have Bad Diesel Fuel

I have a ford 1520 with narrow utility type tires, I need to put wider turf tires and rims on it. Any ideas where to go to get these? thanks, Mike

I have a Ford 1520 built in 1993. The front axel near the left wheel is leaking what I believe to be transmissioin fluid. It is not coming from the wheel but the assembly near the wheel. Tractor is 4 wheel drive. Seems to leak running or not. No noise from transmission when running. Any ideas on...

Greetings, folks. I just discovered this forum via Google search, trying to find a hydraulic schematic for my Ford 1520 HST, to debug a problem I'm having. One of the very first hits was a link to this forum, and directly into a discussion on my EXACT problem! I've been around Web forums in...

We recently purchased eight acres and I'm in need of something larger than my dad's Gravely zero turn to handle mowing duties. My dad got to try out his friends Ford 1520 on the property today for about 6 hrs clearing brush with the bush hog. He said it ran strong all day, but at one point some...

Yeah I was using it to move some stuff around the yard here. Now when I let the clutch out it takes it a second or 2 to engage. It does appear to be slipping, Not sure what year my tractor is. the serial # is UH30119 that didn't show in the tractordata. Also can someone please possibly post up...

I recently inherited a FORD 1520 4 wd hydrostatic transmission tractor with the following FORD equipment 5' belly mower, front end loader, and model 110 1 bottom 16" plow. The equipment was all purchased new by my father in 1985 and used to maintain his lawn and garden. I am using the equipment...

When I hit the brakes, the pedal wants to stay down, they do not spring back like I think they should They hold good, no noticable grinding. I have greased all the linkages and checked the spring all is good. I can take my foot and pull the pedal back up, and all is good. I just recently...

I cant get a wrench or socket on the nut nearest the block. Is there a special tool required to remove and reinstall the starter?

New to me Ford 1520, just bought this tractor, previous owner must have had problem with ignition sw, found all this when I got it home, previous owner changed the sw out and used and 3 prong sw with a start button, he left the glow plug wires disc, that configuration worked good unless it it...

Is there a site on the net where I can pull up a wiring diagram for a Ford 1520.

hello. I recently have been gifted a ford 1520 with 7801 loader and mower deck. the tractor was my wifes grandfather and its in maine. I live in pa and I am going to get it in January. if any of you 1520 owners can tell me the overall width and length of the tractor with the loader and the mower...

Its time to change the hydraulic fluid in my 1520. I see what looks like two separate drain plugs underneath. I do know where the engine oil plug is. Do I pull both plugs to drain? Also, can only find the dipstick (between my feet) but no signs of a fill point. Do I have to put like 23...

I am looking to purchase a used loader for a Ford 1520. The specs call for a 7108. Are there other loader models or brands that will fit?

Hi ,my 1520 started grinding going into gear, then clutch started sliping.Some one said there was inspection bolts.were are they. i have 1in play I also need a set of 7x14 front tires and rims for it.Thanks Terry

I just started taking care of my friends 1520 tractor who is in the hospital and he is too bad off to answer questions for now. The oil filter is dated April, 2007 with 272 hours running time. I know he put in new oil this spring. 1) how often is an oil change recommended? 2) where in the hec...

Can anyone tell me if a Hood off a Ford 1990 1620 Tractor will fit my 1990 Ford 1520

Anyone know how much a Ford 1520 with a 7108 FEL and ballasted rear turf tires weighs?

With my newly acquired 1520, I have been doing LOTS of reading. I understand that the glow plug lamp often does not light up because of the timer relay. I also understand that the timer often still works, but does not light the lamp. With my lamp not lighting and nothing to loose, as I am not...

Hey guys, I have recently acquired a 1990 Ford 1520. I am trying to find out how the battery cover is situated in this thing. Official New Holland Online Parts Store and Online Catalog for New Holland and Ford Tractors. Item number 6 in the diagram or part #SBA389410070 is currently just...

I hope someone can help me with this. I have a Ford 1520 diesel tractor I purchased used 15 years ago. It's been a work horse!! Unfortunately my son got his truck stuck in the mud on the property and I used the tractor to pull him free. I pushed the engine pretty hard. Ever since then it...

Ok guys, I am new here, enjoying my TC55. But recently purchased a 1990 ford 1520 as a project to fix and sell. The tractor has set outside for 4 years without being started. I changed the oil and filter. Drained all the fuel replaced the fuel filter put in new fuel. Put in a known good...

Where do you add the new fluid? Is it that black cap to the left of the third arm attatchment?

We parked our tractor and the next day went out and it will not run. It acts like it is not getting fuel. What should I check.

Hello, I have been looking at getting a tractor and today i stumbled on one. I want to get a price check. I tried to search the forum and couldn't locate any recent ones... So i signed up and when i purchase one i will be on the forum daily. The tractor i found is a 1997 Ford 1520 2wd...

Hello, I have been looking at getting a tractor and today i stumbled on one. I want to get a price check. I tried to search the forum and couldn't locate any recent ones... So i signed up and when i purchase one i will be on the forum daily. The tractor i found is a 1997 Ford 1520 2wd...

Hello, When using independant Left or Right brakes there is growling sound when depressing pedel.:confused: If I press pedal hard enough to lock the wheel completly the growling stops. The sound is moderatly loud and comes from the rear of the tractor area. This is the second tractor I have...

I have a small shop manual, but from the picture or info provided I can't determine the number of brake discs per side. I ordered two at cost of $130.00 thinking I could replace both sides, however I noticed an extra brakes disc on the left side. Now I wondering if I missed replacing one on...

I am in need of making a "mixed marriage" of a John Deere model 7 backhoe and my Ford 1520 tractor. The 1520 is 4wd with Hydrostatic transmission and also a front blade attachment. The JD 7 came with the sub assembly for a John Deere 750 Tractor. A few questions: Is this even possible...

I've got a 95 ford 1520 4wd. If I push the clutch to coast there is quite a bit of drag and it brings me to a stop kinda like the brake is on. Its not as hard as hittin the brake but hard enough to be a real concern. If I disengage the 4wd all is fine. Tractor still pulls good in 4wd. Does...

Apologies in advance since I'm very unfamiliar with tractors and the terminology used in describing their parts. That said, here's the problem. If you look at the picture you will see what my neighbor is pointing to. The silver dome has a stem that is connected directly below it. The inside...

I'm trying to find a cross reference for glow plugs for my 1989 ford 1520 (oem # sba 185366190) and am hitting a stone wall. Seems like ngk or bosch or somebody might make it. I can get close as the perkins number is the same. Anybody run into this before?

I'm servicing my newly acquired 1989 Ford 1520 3 cylinder Shibaura diesel and have a question about fuel filters. I was under the impression there were supposed to be 2, the one in the sediment bowl (87300039) and a cartridge type (83937061). I can't for the life of me find the...

Just bought a 1989 Ford 1520 with 7108 loader, looking forward to learning what I can from being a part of this community. (I've already picked up some good info prior to joining) Thanx

Howdy all, got a newb (I guess) question...I have a 1993 Ford 1520 with 4 wheel drive and hydrostatic transmission that I am about to buy a Amerequip 6600 a used (OEM version of JD 46 Backhoe) for. The backhoe comes with a 3pt Hitch and a PTO hydraulic pump. From what I've read, it isn't the...

I have a Kubota B9200 & saw someone selling a Ford/NH backhoe w/ full subframe that was on a 1520. Would I be able to get this to work on my B9200? I can do some cutting & welding, but am wondering if it is at all possible.

Hello, just recently purchased Ford 1520 2wd geared. Need to change the spacing if possible on the rear wheels in order to obtain enough clearance to use chains on my turf tires. Manual has a diagram which i'm not following, mentions switching the wheels. Thought you could maybe flip the...

Does anyone know a place where I can find a replacement switch? If you have the part no. that would be great. Is there a generic one that can be retrofitted to the 3 cyl diesel application? An overall good source for online parts would be great to know. Does anyone also know if parts...

Recently, I checked out this 1520 featured HERE It looked to be in decent condition, with minor surface rust here and there. The seat will definitely need to be replaced, as well as the tires (rubber dry and starting to crack, and one rear tire's sidewall worn down to the plies). The...

I've got a good friend with an 87? Ford 1520. 3 times in the last 2 weeks he has blown the gasket rubber out of the hydraulic filter, and the filter has been replaced twice. I'm a 30+ yr mechanic and I'm betting there is some kind of restriction or stuck bypass but I have not gotten a manual yet...

I bought this little Jewel in 1988 after agonizing about buying American and buying a product whos manufacturer would not be out of business in a few years. "Arnold" lives at my rural place, in Wisconsin. I haven't visited in 6 weeks and my expensive car, in the semi heated garage is stone dead...

I have scoured the internet and I have made numerous phone calls. I still can't find an engine for my 1996 Ford 1520 Diesel tractor. The block is shot so I'm looking for a complete engine that I can just drop in and bolt up. Perkins is making a replacement engine for this model. Problems are...

I AM LOOKING FOR A HOOD FOR A FORD 1520. I RECENTLY BOUGHT A USED 1520 2WD FROM THE CITY FOR $700. IT HAD WELL OVER 2000 HRS AND RAN OK. I KNEW WHEN I BOUGHT IT I WOULD HAVE TO PUT A CLUTCH IN IT AND THAT THE FRONT AXLE PVIOT PIN AND BUSHING WERE WORN OUT AS WELL AS THE FRONT AXLE NEEDED SOME...

or rear PTO Finish mower. Also still looking for shop/service manual or some one who will sell me a copy of one. Thnx

Does anyone know where or if there is a fusible link on this model? Also looking for service manual (1997) original or copy. How about ring chains for this 13.6-16 turf tires? thanks

Need service manual, used? copy? Also looking for ring chains for 13.6-16 turf tires. Prefer local Albany, NY area if possible for P/U. thank you.

I had to change out the PTO countershaft and PTO gear because the PTO would not stay engaged for more than 5 minutes and kept popping out. I tore her in half and all apart but thats another thread LOL. The sealant I cleaned off was a cement like ( Had a heck of a time separating the casts) light...

How do you check the hydraulic fluid on a Ford 1520 tractor?

Also posted this in Hydraulics - I just mounted a Woods 6500 backhoe on my Ford 1520 copact tractor. I called the Ford Dealer and they told me to just connect the two lines from the backhoe into two of the lined that go from my hydraulic manifold to the loader (7108) controls. The block has...

Ill start off by apologizing for all the questions which may be common sense to most but not me, lol. Ill probably have more questions later but need to ask these to prevent myself from damaging my tractor before I get in the manual. Ok, I am completely ignorant of anything tractor or deisel...

I have only had this tractor for a few days. It is a 1989 Ford 1520 4x4 hydro, FEL. It is my first tractor. I bought it from a small business that buys/sells/trades tractors. When I go to start it, I turn the key to the left and the glow plug light on the dash lights up. But, it never goes...

I just got this tractor. It is a 1989 Ford 1520 4wd 23hp compact with Front End Loader. 1200 hrs Shut it down yesterday with the shredder on the 3 pt and it was in the air. Cane out this morning and it was still in the air where I left it. Started it up and after about 30 minutes of...

Any input you all would have would be great. I currently have a Ford 1700 4x4 with FEL, Bhoe, box blade...The tractor has alot of hours, over 4000 and is pretty rough. I have found a 1992 or 1995 not sure Ford 1520. The tractor has 1200 hours on it, 4x4, hydrostat, power steering, Ford FEL...

Hello, We have a late 80's vintage Ford 1520 Tractor with a FEL and a MMM. The primary use is cutting the 5 acres that our manufacturing facility is on. We use the FEL regularly and have a need for a back hoe attachment. We would want it to be easy to remove and not have it interfear with the...

got a chance to get a 2 wheel drive 1520 for 500 dollars with motor missin everythang else good. i got a 1700 4x4 so most parts wont interchange an dont really need another small tractor unless i can turn it over. where can i find a price for good used motor or new other than dealer. apreciate...