cub cadet 7360

Our Cub Cadet 7360SS front tires are in need of replacement. Large cut on sidewall on 1 tire. Other tire had been plugged several times including plug in side wall also showing lots of dry rot. Any way they are a Firestone 10x16.5 6 ply AG tire. I have a buddy with a tire machine so...

Ive been reading on this site for years. Figured now that I have a bit of an issue it might be time to post a question. We have had the Cub Cadet 7360ss for about 10 years now. Bought it used with about 100 hours on it. About 500 on it now. Been real happy with this machine. Last fall...

I’m looking for several different parts for my tractor. Most important to me is a ma 10312129000 it’s a gear on the front drive assembly

Hi, I am looking for a new or used MA-10312129000 14 tooth gear for a Cub Cadet 7360SS tractor. Willing to purchase a used front axle / differential if needed. Also looking for good sources to fabricate the part if needed. Part is also used in Cub Cadet 7530, 7532 and maybe 7274 tractors.

I'm looking for front differential Ring and Pinions gears for my tractor, they were damaged, removed before I bought it. The tractor runs great but I sure would like to have 4wd option. It seems the gears aren't available for purchase anymore and I can't find any used places that have any. Any...

I have a Mitsubishi MT225 tractor which is equivalent to a Club Cadet 7360SS and my glow plug system has stopped working. There is no light and no voltage to the glow plugs. I can not find any information relative to testing the glow plug relay. Any help will be appreciated.

I know this has been discussed a million times, but I can稚 find a post with any info on how to wire in the push button. I am not electrical talented and am hoping one of ya値l can point me in the right directions. A simple parts list would be great too. Thanks!

rebuilding the injection pump.

. I just bought a 7360 and I'm having a lot of trouble with the shuttle not going into the forward position - sometimes yes and sometimes no. Reverse is OK. It is not the cable or the shuttle shift lever. Any one had the transmission out of this tractor? Also discovered the mfd is not locking in...

Got both cub cadet manuals. Pics indicate a cover on side of center case, labeled "Lever holder" 4 bolts appear to hold it on and I removed them, but short of destroying it, it refuses to come off and the pics are zero help. I disconnected all external linkage, shift is in neutral. Pics look as...

Finally after a complete engine rebuild with OS pistons it runs. Loader has been used some but after using tiller, the engine appeared to be locked up or really tight. This was the first time TP and PTO have been used. Nothing was done to the trans or rear drive. Thought it was starter or...

I broke a crank last weekend, I'm looking for a crank kit. If not I have alot of parts for sale!! Thanks!!

Looking for a grill and hood side panels for a 7360 any info would be great. Thanks

99 Cub Cadet 7360ss will not go into reverse It has been acting up for awhile, sometimes grinding a little and coming out of gear. Today it just wont go in reverse anymore. The cable is fine and the lever on the side of the case is fine. Is there a cover to the center part of the tranny that I...

I started this project several months ago. Bought this non-running tractor with loader for $2600 with hopes it would be a relatively easy fix. Discovered low compression on 3 of 4 cylinders and after removing the head, found #3 had a significant ridge. I checked several of the parts suppliers...

I have a 2000 Cub Model 7360SS with a 485 front loader. I love the tractor and it has always been great, but now I am having a serious problem. It will not shift into any gear at all. The levers all move freely, clutch pedal pushes fine, engine runs fine, but it will not go forward or reverse...

Convinced a friend that this was a better deal than a 22hp Mitsu with loader for $5900. Got this for $2600. Has 485 loader, motor turns over, doesn't start. Burned out glow plugs, relay and controller which seems to be a common failure. Has electrical issues as key won't crank it. Got the...

I am missing my drawbar and I can make one if I have the dimensions. Please and thank you for taking the time to measure yours!

I'm missing my drawbar and am wondering if anybody has one for sale. Or does someone have the dimensions on it so I can make one. I want to haul a manure spreader this summer. Thanks for any info.

Looking to buy a 7360SS. It has 1100 hours on it. Looks good and runs good but the front driveshaft seal is leaking and there is other fluid drips on the oil pan. Don't know where they are coming from. Is there any know issue's with this tractor?

A dealer just took a 7360 in on trade and emailed me about it. I don't know anything about it, other than it has about 660 hours and he is asking 14k for it and it has a loader. I have a couple questions I am hoping you smart types can help answer. Who made the tractor? How hard is it to...

i have a 7360 ss with a woods loader the transmission was cracked when i got it, so i had it fixed and it broke again. i think it is the loader doing it so i am contemplating selling the loader. what do you think is a good price. or should i just sell entire tractor. i liove the tractor but it...

Does anyone have any source for hydraulic filters for a cub cadet 7360ss tractor.

I want ag tires to replace my landscaping tires. Where can I find them??

Can PS cyl be removed for repair on a CC 7360 SS without lowering frt axle? Thanks,Jim

Well, now I've discovered that my diff lock doesn't work. The pedal just goes down easy and stays down all by itself. Is this a simple fix or a nightmare? I'm starting to think I've been had! Any ideas??

The glow plugs and indicator light on my 7360 never go out until you pull the fuse. Is it the controller or the relay? Does anyone know how to test them? I have power at the glow plugs all the time.

I just picked up a 7360ss for cheap money but I didn't get any manuals with it. I want to do a full service on it but I am floored at the cost of the filters. $150 for a hydraulic spin on filter, $110 for a simple air filter!!!! There must be a cheaper option. What kind of hydraulic oil does it...

Anyone have any experience with this machine, 4 cyl 36HP Mitsubishi diesel engine, bought it a few months ago, I'm the 3rd owner, seems under powered.

I need a new drawbar for my Cub 7360ss. Was wondering if anyone has access to the dimensions so I can have a new one fabricated locally. Follow on post: I actually found the answer in an old post from 2004. Here is the link with the dimensions in case any one else ever loses theirs...

I'd like to buy a skidsteer type front auger to go on the front of my tractor. They don't come with auxiliary control units. Any thoughts on what can be done or am I missing something?

my pto on my 7360ss isnt working when i purchased the tractor it had a cracked transmission midcase but the pto worked water had gotten in through the crack so we disasembled the tractor and welded the transmission put it back together now pto doesnt work and wont turn freely by hand ( like...

I'm looking for a soft cab for my 7360SS. Seems that the manufactuers I've checked do not make them any longer and I am not able to find one made for another tractor that will fit the 7360SS. I would welcome any and all suggestions for a fit. Thanks Chuck

I read somewhere that the Kioti DK35 was the same tractor as the Cub Cadet 7360SS only orange. Can anyone shed some light on this? I am looking for a canopy and soft cab for the Cub Cadet and so far have been unable to locate anything worth buying. I have been able to find a lot of stuff to...

I got a quick answer to my first question so I thought I would ask another. Is there a fuel filter housing with an integral drain to allow draining water from the housing without having to remove the whole filter housing and spilling fuel all over the tractor and my hands. I know that airplane...

I'm a new tractor owner and for the life of me I can't open the hood to get to the fuel filter. I have turned the hood releases both to the "dash" and "O" and still not able to open the hood. Any advice would be helpfull. Thanks Chuck

Thought I'd post a list of filters (air/oil) that I've crossed over for my 1999 7360ss cub. This has the 4 cyl Mitsubushi 36 hp engine in it. Not had to do much to this but glow plugs, and the controller that usually burns them out. Good machine and believe it or not, used it for the last 2...

Fighting glow plug issues again. About 40 degrees this morning. 12 volts is only supplied to the plug for less than one second and the light goes out and the voltage stops. I want to check the water temp sensor and it appears there are two in the thermostat housing. One is probably for the temp...

Hello everyone!

Where can I find yr model of a Cub Cadet 7360SS SN 20739? Thanks,Jim

Lost my draw bar, anyone tell me the dimensions? CC wants $141 ...not happening.

Bent my right lift arm today, Cub Part # MA-10373011AG0. $273 from Cub website? Can that be right? I repaired a 1/2 mile dirt drive today with my 6.5' box blade. Guess I got a little rough with it. The BB ripped a rock about 5' long by 3' wide and 9" thick out of the ground. It actually stalled...

I checked around and I can't seem to find them online. I need both headlights - the glass exterior and the bulb holder. My somehow fell apart with corrosion and rust. Can anyone tell me where I can get them headlights or a similar model that will fit my tractor? My tractor is a 1998...

Got a little bored this afternoon. Just uploaded a few pictures of my 1999 Cub 7360ss Not sure how to put a link here to them but they are in the photo section. Search for 7360 and I think they will come up ok. Took a few shots this fall from some different angles if anyone needs a few...

My 7360ss' glow plug light has not been coming on at all, and I hear no clicking noise when turning the key. It's still quite warm here in south western ohio, so it's still starting (a little slower than normal though). Can anyone tell me how to check the glow plugs (with a ohm meter...

I just purchased a 7360ss from an estate sale. 130 hours, and only used with a 5' bush hog. I asked the local cub dealer about a loader and potential problems with the transmission flanges breaking on the 72xx series that I read about on this forum. He said it was due to aftermarket loaders and...

Hi everyone I'm new here and it looks like some of you guys really know your stuff! I've been looking for a utility tractor for a while. I came across a used 7360 Cub Cadet, 4x4, woods loader, cab and 62 hours on it. Great looking machine! It's on the high end of what I would like to spend. I...

Who manufactured it for cub? Or did cub build it. thanks Mike