Search results

I have 2 iseki's: the tx1500 (2wd) and a tx1300F (4wd) Essentially they are completely the same. Even the parts manual shows this. My tx1300F has been heavily over-used (because of the shape of my ground i need 4wd), and has run minimal 100 times more hours than my tx1500. This shows in the...

Like every winter i have problems starting both my iseki tx1300 and tx1500. Temperatures around 0 degrees Celsius now (=32 fahrenheit) I fully charged both batteries. Also i have placed an extra ground cable from battery to the starter engine. Still both machines will not start. Cranking is...

My Iseki tx1500 had problem starting. So I took it apart (again) and found that one of the injectors was kaputt. I have a spare engine lying around, so decided to take injectors from this one. But like always they were not the same fitting, so I started to just replace the complete cylinder...

I will soon have to split my TX1300F to replace the clutch. This is far from my 'normal' world. Is there anybody here who has already done this excercise and has some tips or tricks available? many thanks Marcel.

My beloved iseki tx1300F suddenly has the issue that, when i press the clutch, the RPM drops significantly (engine even stops sometimes). Strange enough things are fine with the clutch up. Anybody ever experienced this on any tractor? Any clue about what can cause this? Somehow i have a...

It looks like one of my injectors on tx1300 gave up. From what I found, all I can buy is a separate injector nozzle. But it looks like it's only a small part of the injector. Is there a way to separate the nozzle from the injector? To me this looks like one solid piece of steel... I can find...

Hi all, my tx1300F will not start anymore. First i found that the ground cable and starter engine became extremely HOT after trying to start with help of starter cables (on my iseki tx1500). Even the starter cables became too hot to touch. After this i replaced both the battery, the starter...

Hi all, I am a happy owner of 1 acre of land and two small iseki mini-tractors. But these 600kg were just too light to do the job with the land, do I bought an ursus c 360 , almost 40 years old. Seems to be in pretty good shape, but testing it showed it stopped every 5 or 10 minutes, and I...

And again, new day, new problem. Yesterday I changed hydraulics oil on my tx1500. I did it completely, take off differential and gearbox cover, cleaned inside, cleaned filter, put back together and hydraulics were working. Today using the tiller, after 30 minutes the tiller could not be...

This sunday i spent a few hours in garage again. This is what happened when i tried to start it in the morning: When trying to start it, some smoke came from what looked like under the little console/dashboard. From what i know this would indicate some short-circuit of any kind. I wanted to...

So you have this little iseki/bolens... Now what do you do with it??? Hi there, since about 8 months i am happy owner of my iseki tx1500 (later joined by a tx1300f) The purpose of this tractor was to prepare my half acre of ground to grow stuff. Grow stuff like potatoes, onions, and garlic...

I sided my little iseki tractor a few weeks ago. I got off really lucky, because a tree was almost in the way. You can find some photo's here in this thread: https://www.tractorbynet.com/forums/iseki/414683-oops-sided.html This little tractor has limited options to install a ROPS. But i can...

Like in topic: i was stupid enough not to check fuel before going to work. So it ran dry. But after putting diesel in tank, it just will not start. Sometimes i can hear on a crank that it is picking up something, but 95% it is just making it's rounds... Is there any explanation for this? Any...

Based on recent events i started looking for a ROPS . I came across this link on the local ebay: ISEKI TX GA pałąk rama części ORYGINAŁ NOWA 76142232 - Allegro.pl As i have no clue what they should look like: Can anybody confirm this is a ROPS? Also: any clue how this has to be fitted to...

Hi all, i have intention of building something to cut wood (small trees), max 12-14 cm thick. The biggest problem is that i need to slow down the PTO rpm. I have a little Iseki tx1300F, which gives abt 470 rpm. I need to slow this down to about 60rpm. This would involve gears. The smallest...

Because i tilted my tractor i had opportunity to make photo's from the bottom view. Now looking at the photo's i see something strange. Well, i think it looks strange. This is the axis/shaft (no clue what it is called) for the front wheel drive. It seems not ok. Can anybody confirm? Any photo...

I was working some ground with the tx1300f and the rotary tiller. Somehow when making a turn it happened: Tractor went to it's side. I was seriously lucky, because this tree was in the wrong place, and it could have given me a few broken bones or worse... We tried to get it straight, but...

I have this custom-made backhoe that came with my iseki tx1500. From what i read on internet it is not a good thing to connect such a structure directly to the tractor. Because the tx1500 does not have a frame ( it is just the connections between engine, tunnel, gearbox, and differential) the...

Hi all, on my Iseki tx1500 they connected this excavator. But because of the way it is connected, one of the previous owner(s) removed the hydraulic part where the 2 lifter arms are connected to at the back. It is located under/behind the driver seat. Anybody has any clue on the name of this...

Hi all, my name is Kaz, i live in the south of Poland, just bought 1 hectare of land, and last week i bought an iseki tx1500 (2wd) second (3rd/4th/5th) hand. One of the previous owners built this digging machine (excavator?) and connected this to the back. Everything was running (starting) ok...