Search results

The 3 piece bar kit you refer to.... it's that factory stuff from the ezgo top?

I have a kioti DK55 ROPS. I've made a cover out of a gold cart top. I'm wanting to install a radio and speakers. Im thinking marine stuff should do fine. But do I need to have then in any sort of enclosure or can they be just mounted ?

I have a titan implement 1306 cutter that I believe the clutch has gone out on. Anything other than light grass just doesn't cut and sounds like I'm loosing blade speed. The clutch gets super hot too. Where can I find info on replacing the clutch disc's as well as the specs for the bolts etc.

In what situations would you use this slotted portion on the lower link lateral stabilizers (unsure on actual name) mostly use my 3ph for Bush hog. Have a auger and box blade (which I've yet to use) as well.

I'm sorry. I thought I had posted this picture. The roof runs perpendicular to the side of the house that I'm working with. Cost and ease and installment is the biggest reason. Also structure is sound level. It will remain as it is for the foreseeable future

So in these very basic, and not to scale, drawings you can see the lean to shed from one plane. The length or depth of the shed is dependent on the height because of the roof overhang that i'm working with. The taller the shed is the narrower the roof line is. I don't want to go any less than...

When cutting the back pasture my 551 keeps getting hot. I turn off the PTO and let it idle for 5 min and the temp goes back to normal. Lasts about 10 min then get to repeat the process. 6ft bush hog. Medium range and in 4th gear. Happens slower if I'm in 3rd gear. Grass is about waste high...

On our property we have an old house that had a fire in a portion of it. The house is unusable and will eventually be torn down. I am looking for some additional covered storage out there. I was planning to put a lean to on one side of it. I am new to this type of building but am good with my...

I'm looking to purchase a set of forks and. Hay spear. Or a combo. Or just forks. At this time I'm having someone cut the fields for hay but I'm having to move the bales. So my first thought was... hay spear....then I thought a set of forks would be useful in countless ways...then I stumbled...

I know this has been discussed somewhere before but I cannot find it. I am coming up to my first maintenance on my new to me DK551. I need to get air/oil/hydraulic/fuel filters. I have the part numbers but am having a hard time finding vendors online. I found tractorjoe but that is...

I've been unable to find the type of tip/teeth that it came with but I have found these. It was suggested to me that I can drill a second mounting hole and it will work just fine.

I purchased a post hole digger and two auger bits 2nd hand. It's apparent that they need the teeth replaced. Im going to try and attach pictures of how my bit is set up. Where do i get replacement points and teeth?

I just purchased a low hour, 72, Ikon x 52" zero turn. It throws the drive belt as soon as the engine is on. Otherwise it is in excellent condition from what i can determine. Where do I start in troubleshooting this? The pulleys all appear to be in line and the belt is tensioned to spec. I...

Probably a dumb question. I have a Kioti DK551 that has Cat 2 arms on the rear. My brush cutter is Cat 1. I am using reducer bushings on it. The brush cutter attachment points are set up in double shear. The bushing always seems to wander out from under the link arm and doesn't do its job...

2013 dk55. When i move my 3pd lift control all the way up my implement lifts, but not by much. Then when i move my draft control from all the way forward to the rear most position i get a lot more lift on the implement. Does this sound right? I was under the impression the draft control...

I am trying to trouble shoot a strange vibrating/humming sound from one of the loader roll hydraulic lines. I've isolated which line it is but don't know where to go from there. It was suggested in the hydraulic forum that there may be air in the line and that i should cycle the loader...

Is there any resource on the internet with basic info on maintenance on these tractors? How to check fuel bowl, how to do oil and hydraulic changes, how to disconnect loader, where and what to grease, how to's in general. I am a brand new tractor owner with a new to me 2013 DK55. I have...

I just started having a humming and vibrating from my front end loader lines. It only does it when i curl the bucket. And it only does it in one direction. Dont see any leaking or wet lines. Im going to try and attach a video. I know which line it is by touching each line.

I just got my new to me Kioti DK55 home. As not to mess anything up can somebody please explain to me where I should leave the had draw remote levers when not in use. My limited understanding is that there are several positions they can be placed in. Unfortunately I don't have Immediate...

I brought home my new to me DK55 open station yesterday. Can someone please explain to me where the remote levers should be when not in use. Pictures would be great as the tractor is not near me right now. Also pictures of where the 3 point adjustment lever on the back of a tractor attaches to...

Im looking to add a sunshade/canopy to my ROPS. Looking for aftermarket options. Id prefer something stout...maybe something with a metal frame all the way around and then fiberglass.

I'm looking at purchasing a 2013 Kioti DK55 open station, 4wd, shuttle with loader. This also includes a skeleton bucket. Asking price is 18500. It has 375 hours on it. Per the owner it is in "spotless" condition. I will be going down tomorrow to take a look at it. I will be using this...

So im trying to get details on a tractor im looking at in the AM. Husband passed away and his wife is selling it. Its a 2001 Kubota M4900. Open station, 4 wd, loader. My research on tractor blue book shows numerous sub models. Just trying to understand. M4900sc M4900Scsf M4900Scd...

I am looking to purchase a 98 JD 5410 with 520 loader. It is 2wd and open station and has 1700 hours, appears to be in great shape in the pictures . I will be using this for general land cleanup on 54 acres, bush hogging, auger work for fence line, grapple work, etc. Later down the road I...

moved to correct forum

Im toying with the idea of a shipping container for storing tractor and other equipment on our new property. The ID of the container door is 101.5 tall at its smallest point. Specs for the tractor im eyeing are 100.7in tall with Ag tires. I have no way to test fitment before purchase...

I am trying to figure out temporary storage for a new tractor. Im looking at a xu5065cps. I found the specs for a 5065cps wigth 67 minimum, height at 100.7 with ag tires.....how accurate is this? What is the height with r4 tires? The inside dimensions of the storage container is 8'10" high...

We just put money down on roughly 54 acres in north east georgia. Our family thinks were are nuts. Once the kids are done with school we will be moving out there. For the time being we will be getting everything back up and running. I am including aerial shots of the property as well as the...

The front parcel is gently rolling with roughly 18 acres of pasture and 2 acres of woods, most of that is perimeter woods with some scattered trees. The back parcel is essentially level with an abrupt slope down from the front pasture. Roughly 27 acres of pasture and 7 acres of woods, again...

Let me start off by thanking everyone for the wealth of information that is available on this site. My wife and I are in the process of buying some land. We know a tractor will be in cards soon after. I'm trying to decide between a shuttle shift transmission and a hydrostat transmission...