Search results

My tractor threw a CEL today (155hrs)., and rpms started to fluctuate. Does this thing have an OBDII port? Nearest dealer is a couple hours away, I'd like to try and do some troubleshooting myself first.

I have a CT20235. I am looking at the "Operations and Maintenance Manual", and a copy of the "Service Manual". The maintenance schedule is different, especially for oil changes. This is from page 187 of the Operators Manual. This is page 134 of the Operators manual This is page 2-25 of the...

I have a pair of forks I retrofitted to my tractor. They are not quite level. They work, but it can be annoying to pick things up as one digs into earth while other digs into what I am picking up. I am trying to thing of a way to level them out. I have a welder, but not an oxy/acetyline torch...

I borrowed a MF Model L post auger from someone to use with my Bobcat CT 2035 tractor. It seems to not use the top link of the 3pt hitch. I got it connected, but I can't lift it enough to get the auger off the ground. See the images. Has anyone had any luck getting one of these to work with a...

So I found an old set of pallet forks on our property. I removed the mounting brackets (allis-chalmers) on them, and added a quick-attach bracket. The left fork adjusts in/out to change the spacing between the two forks. The problem is that the sliding is really rough in some spots and loose in...

Had the first dump of the season, so i got to try out the ne (to me) snowblower. I threw a lot of rocks. It was only 0c so the ground was soft and the shoes sunk. I tried to control the sinking with the 3pt hitch raise/lower but it was tough to get it right. The driveway is slightly higher in...

1. In the manual, for engine oil, it mentions I can use 5W-40 synthetic. In the part numbers section of manual it lists bobcat part numbers for various oils, but not one for 5w-40 synthetic. Can I just ignore this and use Pennzoil 5w-40 synthetic? 2. For differential/front-axle, the manual says...

I need to order a small plastic part from bobcat, and it order to get the free shipping, I was going to order a 50 hour maintenance kit for my CT2035 HST. The manual says to replace engine and HST filter and oil, front diff oil. But the 50 hour kit for my tractor shows a HST and Hydraulic...

I just bought a property that came with a 1971 Allis-Chalmers 170 FEL. I already own a FEL, and so my plan is the to sell the 170. I don't have all the details on the 170 yet, as we won't take possession of the property for another 2 weeks (I'll update the post when I can). I don't know the...

We are putting an offer in on a property, and it comes with some machinery including a 2014 Kubota L3200 HST. It has always been stored in a shed, and looked to be in great shape. It has 520 hours on it. I already own a tractor, and would be looking to sell this one. Any idea what a fair price...

So we were moving back to my wife's home province. We bought land (15 acres) and were going to build. I got a good deal on a new Bobcat CT2035HST with loader. I bought it and hauled it across the country, as it will be perfect for when we build our house. that was 18 months ago, and we are...

Any tips on using flat deck for hauling stuff to the dump. I am going to build some small sides, but would be nice if unloading at dump wasn't such a pain. I don't have a dump. I am thinking a few totes that I could tip over the side may be the best... that allows me to group steel, lumber, etc...

I have a line on a 12' tandem trailer with brakes. It is a fair ways away, and before I drive to see it, I am wondering if it would handle my tractor with FEL (Bobcat CT2035). I have used a 14' before, and I think 12 would be tight, but I only haul the tractor a couple times a year, so doesn't...

I have a nice solid tandem trailer, but they built it using axles without flanges. I am handy with welder, wondering if I could weld on a set of flanges. The trailer shop I took it too said the weld on flanges they had would not work, not sure why. I assume they just were not comfortable doing...

I have a 35hp bobcat ct2035 hst tractor. Seeing a lot of used 54" snowblowers for sale. I feel like I would like something the width of the tractor though. I see a nice 64" for sale, but not nearly the deals as on the 54s. There are some 72s and 80s but I feel that would be too big. I mean...

I am looking at a UTV with some trail capabilities. I am pretty settled on a Pioneer 1000-5 but there is so much choice out there, that I am sure I am missing some good options. Unfortunately due to our friend COVID nobody has anything on lots I can try out, and I have seen used higher than what...

Aside from Bobcat brand, is there another brand/grade I can pick up from local agri-supply store?

I had rear remotes installed when I bought the ct2035. I am installing a Summit 3rd function kit. Current PB runs to the remotes block. Took that line off going to run it to my 3rd function block then return it to remotes block. Does that sound right? The fittings that came with summit kit...

I am looking at the bobcat parts catalogue. And when I lookup CT2035H, it breaks it into two groups: B4VK1101 & Above, and B4ZF1101 & Above. 1. Does anyone know what the difference is between these models? Mine is a B4VK, and is a 2020. Maybe the B4ZF are the 2021's? Thanks.

Anyone, have a PDF of the service manual for a CT2035? I am not paying for something that should come with the tractor... For all my vehicles this usually isn't that hard to find, but tractors, especially for a new line, I can't seem to find from the usual sources.

I am starting to look for a grapple for my Bobcat CT2035 (35HP, 1650lbs lift). I really like the root grapple from EA (Subcompact Compact Tractor Wicked Root Grapple 50'' Single lid). The 54" is only 250lbs and 275lbs with the extra slats. I am fine with the single lid, as it keeps the weight...

I am dealing on a ct2035 hst. I tried to get a deal on 3rd function, but they would move at all because it was backordered for months. I ended up ordering a summit kit for when I don't get tractor. I am reading the threads here and it seems like every orders with the rear remotes. I may try and...

Anyone know which specific kit I need from summit hydraulics for a bobcat fl8 loader?

I am picking up a ct2035 from Bobcat (Kioti ck3510 equiv) this week. I can't afford the grapple I want right now, but I can always buy a grapple bucket later, hopefully used. But I will need the hydraulics to run it. Bobcat is saying they don't have the hydraulic kits in stock, and figured it...

It looks like I missed out on the free loader program with Kioti and Bobcat. The only programs they have on in my region right now is $500 off loader and $1500 off the tractor, which is a far cry from the free front end loader (worth about $5500). I don't really need the tractor until next...

Hello, Has anyone done a comparison of the Bobcat ct2025 or the ct2035 to the Kioti equivalent? Is paint the only difference? Or does one have more refinements or tweaked differently?

I was looking to buy a compact tractor, but recently was given an IH 784 (Utility model) with loader and grapple. This is great as it allows me to put my cash towards a zero-turn and have the best of both worlds. But I am looking for a rotary tiller, and snow plow for the tractor now. Will any...

For our new 10acre lot, I am looking at a Kubota b2601. Would be used for landscaping, snowplowing, mowing, and clearing. The equivalent kioti seems to be the ck2610. Given the extra weight of the kioti, I am wondering if I would rather have the lighter weight of the Kubota for mowing?