Search results

I have traded tractors again. Ended up with a new 4066r cab and a new open station 2025r

I posted my 36" Heavy Duty bucket off my 485 backhoe up for sale in the classifieds if anyone is interested. Located in Tower Hill, IL. See ad for more information.

Any concerns with the new x758 tractors that I need to be aware of? Looking to get a 54 or 60 HC deck and front snow blade.

I am looking at a 1 ton dually with a dump bed. It has the 6.5 diesel with 99k miles. Seems to be in good shape. Any thoughts on this model of truck?

As you all probably know, I have been forced into selling most of my equipment due to my wife leaving me. As stated before I will be back in the tractor buying mode once this is over. I recently sold my 4720 Cab tractor and loader. The backhoe attachment did not sell and I have a friend...

I would like opinions on how well Uhaul trucks are maintained. There is a 26' box truck at a local uhaul dealer for sale that I could buy for $8500. It has somewhere around 230k on it. I think this is a bit high. I would really like to find a used Isuzu or similar 14-20ft cabover box truck...

I have been extremely blessed and now have a 485 backhoe on my 4720. Here is a few "before and after" pics. I can't wait for next week. Hope it doesnt rain too much...;) God is so good to me!

I would like to know if the Deere 485 backhoe or Woods BH90x backhoe would be a better choice for the 4720 cab tractor. Does anyone have a cost for the woods backhoe?

I have been trying to sell my 8 month old 3320 and 72D Autoconnect deck. There has been several people interested but all have been far away and don't want to drive here for it. I also have a 2010 4720 Cab tractor with 400CX loader. I have considered keeping the 3320 and selling my beloved...

I have a 4720 CAB tractor. Does anybody have experience removing the loader? It looks like it may come close to the glass but have not attempted removal yet. Looking for any experience with this...

I have some experience with a RFM and will be facing the challenge of using my 4720 cab tractor for finish mowing areas I previously used a 3320 OS with MMM on. I have to try and sell the new 3320 and 72D autoconnect deck ASAP. I don't mind the cab tractor at all but I have a feeling turning...

Has anybody ever removed a pair of axles from a 7000lb trailer and installed 10,000 lbs worth of axles?

I am supposed to wire up a generator cord for a friend this week. The 30A 240v plug in this pic doesnt look like my twistlock L14 30. The best I can tell it may be a L17 30 receptacle?? Does anyone know for sure so I can be prepared?? Thanks!

Does anyone know if I could mount my 72D drive over deck on the 4720 cab tractor?

I use a Fimco 25 gallon ATV sprayer for spraying roads and driveways. It needed a better mounting so we took care of that today.

My FIL is a big deer hunter. I worked on starting his food plots today. See pics attached.

Here is the pics of my 2011 Polaris 400 HO. I have about 4 miles on it and it rides great! I will report in the future as I put more hours on it.

I am thinking about buying a new Sportsman 500 for general riding and spraying with a 25 gallon sprayer. Any reason to stay away from the Sportsman series? I have had Honda and Arctic Cat atv's in the past but want to buy from a local and well respected dealer close to me... Thanks!

Decided to buy a Frontier 8ft Land Plane (Leveler). Looks well built. I made it home with it on my work van instead of going and getting the truck. Got to save that $4 gas you know...:thumbsup:

I bought a KK carry-all at my local Rural King store. I brought it home and the bolt that was in the bottom hole for the top link from the factory was a perfect fit to my iMatch quick hitch. I was amazed! :thumbsup:

See link for pics of new 3320 and other equipment I have been blessed with. www.photobucket.com/deere3320

My dealer sold me a mx7 because the sales info says it will fit imatch. Problem is it does NOT fit. According to the website MX6 and smaller will do CAT I imatch but mx7 and bigger are CAT II quick coupler. I have a 4720 tractor so I guess I will have to stick with a MX6... Anyone had...

Hey guys, I am thinking of trading my x720 GT for a 3320 with 72d auto connect deck. Anyone done a similar trade? How well does the auto deck really hook up and disconnect? Anyone want to buy a 1 year old, low hour (80) x720 in central IL for $7500? jphippard@yahoo.com 618.292.0025 John

I know a guy in my area (ILLINOIS) that has a large box truck full of equipment he uses for a side business. His business name is all over the truck but also he has "NOT FOR HIRE" on the side. He claims since he only hauls his own equipment he does not need a CDL?? Is this correct and would...

I am looking at a 7x16 and 8.5x20 ramp door cargo trailers for mowing svc. Any experience with this brand? Good or Bad??? Suggestions?

Has anyone here built a house inside a pole barn? I am thinking of building a 1500sq ft or so pole barn and finishing out for a house. Any suggestions on construction practices? Wood floor supports? Insulating? Pics always welcome.

Hey NH guys... I have been looking at a 1715 tractor at my JD dealer. I am looking for a secondary machine for finish mowing and tilling. I remember back in the late 90's when this machine was made that it is a gear tractor with a tranny driven (?) PTO??? Is this correct and do you all have...

I think we could use a "ELECTRICAL" forum. It could be divided into 12v tractor/truck wiring and also high voltage AC.

I have a Frontier loader blade and wondered if anyone has a solution for my problem. I like to run blade in float mode but it seems like the bracket that hooks on loader arms wants to go down and get really close to the ground. I was thinking about welding some skid shoes on that mount...

I have been looking at buying a King Kutter or similar brand rake to help move gravel out of my snow plowing clients grass. I plow several gravel lots and we have to stack the snow in the grass most places. I am very careful to only move a minimum amount but it is there. What do you all think...

My local dealer has a used 2720 with cab, mower deck and 60 inch front blade. John Deere 2720 for Sale : Tractors - Compact (1-40hp.) [95190]

Well I bought a truck. It is a 2005 2500HD CC with 88k miles. The 6.0L seems to run good. I have not pulled anything with it yet but seems to have power. I was really wanting a Ford but there is no dealer for many miles from here. We have a good GM dealer 10 miles away that has given me great...

What do you all think of this truck to pull my mowers around? 2005 Chevrolet Silverado 2500HD for sale at Baum Chevrolet Buick Clinton IL - 1GCHK23U65F962458 I talked them down some on the price. It is a nice looking truck. I drove it tonight.

I am looking for a truck to pull a cargo trailer with mowing equipment up to 60 miles from home. Thinking 8.5x20 would be the biggest size trailer used. My question is: would I be money ahead to spend say 10K on a 10 year old truck with around 150K miles or spend up to 20K on a 5-6 year old...

Hey guys, We are in a bit of a tough decision. Looking for advice and direction. We currently live out in the middle of nowhere and LOVE it!! The problem is this... My wife works 40 hours and I work upwards of 60-80 hours some weeks. We have 2 children that go to a babysitter 2 blocks from...

I am looking at a Ford Cabover truck. It is in great condition. I dont have a pic but this one is what the front looks like and it has a 25ft flatbed on it. What do you think its worth and can I have the frame and bed shortened to 12ft or so??? This truck can be fully loaded with steel pipe...

Hello Kubota owners, As you can see from my signature line I have a few JD machines but I have found this Kubota L2900 at my dealer and I am thinking of talking to him about it for a second CUT around my place. See link for more info. Kubota L2900 for Sale : Tractors - Compact (1-40hp.)...

Hey guys Looking for opinions on a well taken care of 2006 Chevrolet 2500HD 4x4 EXT cab. It is at local dealer with 85k one owner miles. They trade every 3-4 years. Dealer sold it to them new and did all maint. Dealer is going to put new HD tires and battery in it. Asking under 17,000. What do...

I am looking at a Simplicity landlord that has a "new" 3 hours of use 27hp pro series engine. Original motor had internal failure. It was a 23hp Kohler. Any good or bad reviews of the pro motor? I have a mid 90's landlord with 18hp Vanguard b&s motor now. How do these compare?

I have a frontier blade that goes on my 4720 loader arms. It is a manual angle right now. There is a 500.00 dual cylinder kit to make it hyd angle like a truck snow plow. I wonder if I could just install some brackets and use a single hyd cylinder like most people do on a rear blade?? What...

I have some pics of the lights I am wiring up in the nw 64x40 pole barn. There will be more to come.

Many of you read my question about installing walk boards across the 8ft span trusses. I have taken your advice and decided against that for now. I am 6'6" 320lbs and there is only about 5 1/2ft for me to walk up there so I am using scaffolding stacked on my smallest trailer hooked to the 4720...

Click and follow directions...Merry Christmas everybody!! http://ak.imgag.com/imgag/product/preview/flash/bws8Shell_fps24.swf?ihost=http://ak.imgag.com/imgag&brandldrPath=/product/full/el/&cardNum=/product/full/ap/3166187/graphic1

Hey guys, We are getting started working on the electric in our new 40x64 pole barn. I need to run all the overhead electric by walking around in the trusses that are spread 8 feet apart. What size lumber do I need to lay across the trusses so that I can walk the length of the building? I...

Anybody have info on my 917.273200 ? I need info on attachments.

Is there any lower cost implements that will fit my 1994 Simplicity Landlord?? Looking for a Snow blade or Snowblower...

I bought this tractor and blade today. Can anybody tell me what model it is and years produced. 24HP Kohler PRO engine 46" deck 48" dozer blade Tractor is green in color. Owner says it was bought new in 1999 Sorry the pics are from website where I bought it. I will post pics soon. Anything I...

I had a full width roller striping kit installed on my x720's 62C deck when it was new. I am very happy with the anti-scalp abilities as well as the striping of the grass. Sorry I don't have pics of stripes but here is the machine with kit installed.

Can we make a minimum post count before someone can make a for sale or wanted ad?? I am seeing so many one time postings in the for sale section and never participate.

I am getting ready to do the first service on my 4720 cab and it looks like I will have to remove the loader to get in and refill the oil?? Does this sound right?? I think it is a tighter area to work than my open station was.

I am getting ready to do the first service on my 4720 cab and it looks like I will have to remove the loader to get in and refill the oil?? Does this sound right?? I think it is a tighter area to work than my open station was.

Hey Guys, I want to change the diesel fuel filter in my Duramax. I have no idea when it was changed last as I just bought this truck a few months back. Should I go to the GM dealer to purchase a filter or is there an aftermarket product I should use?? I have access to autozone and napa in...

shed 102310 We are preping for concrete floor in our new pole barn.

Here is some pics of my JD 4720 installing rock base in our new shed preping for concrete. EDIT: Here is a new link. I am really not sure why you guys are having a hard time viewing. I am doing this the same as always. Try this and let me know what happens...

Hi all I am looking to dry out some water in my crawlspace after a plumbing issue. I have sucked up several gallons of water off the concrete floor in the crawlspace but have an idea to get an attic fan set in the 2ft opening to help draw air through and dry it all out. What do you all...

I have a 2001 DMAX with 145k miles. Every now and then if the truck sits for a week it will start, run for 45 sec and then die. I have to open hood and prime then truck starts and runs fine. I never have this problem if I drive the truck daily... Any thoughts??

My cousin owns a 2008 Chevy 2500HD standard cab truck with 8ft bed. He wants to know if he can: 1. Install LT285x75x16 tires on this truck without mods 2. What tires for great traction in mud and Load Range E 3. Can he install extended cab short bed nerf bars so he has a step along the bed of...

I am looking to put this winch on a trailer but have a question about powering it. According to the manual with the cable all the way out and loading to 10K load it draws 310 amps. I have no intentions of using all 100ft of cable or loading 10K but want to be prepared for the extreme. Would I...

Here is some more pics of my 4720 and other toys from today. Also included is one of our new pole barns going up at my parents farm.

John Deere 2011 Product Introduction Deere emailed me this link. Check out the new equipment for next year...

I have stated in the past there was no way I could like ehydro. I was so wrong!!!:cool: The 4720 CAB was delivered and the implements are coming Saturday. I spent all afternoon and evening mowing with my bush hog. I am so BLESSED and SPOILED ;) My old tractor and towing rig are shown in the...

I have a 2001 GMC 2500HD crew cab that I pull my 25ft gooseneck trailer with. It seems to not have any brake lights on the trailer. I have read online that it could be in my turn signal switch?? Has anyone ever found this to be true?? Trailer brakes and all other lights on trailer and truck...

I cant hardly wait for my new tractor to arrive. Not sure why I am so excited-I trade every 2 years or so. I have owned many tractors from a 285 L&G tractor up to a 5203 and have 7000 and 8000 series tractors on the farm but this 4720 has really got me excited... Pics will follow...Truck...

I had my x720 delivered today. The 4720 Cab tractor is coming next week. I have a set of brand new turf 26x12x12 rear tires avaliable if anyone would be interested. I had a set of Bar tires mounted instead. Enjoy the pics an let me know about the tires.

Well guys, I never thought it would happen but I bought a new ehydro tractor today. Wait... actually 2 tractors today. I made a deal on a 4720 Cab tractor with 400CX self leveling loader and a few add ons. Also a Frontier 7' sickle mower, Frontier GM1084R finish mower, Frontier 7' front...

I need a Snowblower or blade for a Simplicity Landlord 1692006. It is a 1994 era model year with electric lift.

I am looking to know if the John Deere TRACTOR TRUNK is compatible with a x720 and if anyone would have one for sale?? John

Hey guys, I am thinking very seriously about trading my 4120 in for a 4720 Cab with 400CX loader. I need to know what options and accesories are good and what is a waste of money...I hope to make a trade before next weekend.

Is there a page on the CNH credit site to view current interest rates?? I am interested in a new NH compact tractor with a cab and loader around 40hp. John

Hi all I was out mowing tonight and I noticed the oil light come on. I changed the oil and filter a few weeks back but have checked the level a few times since. I idled down the motor and did not notice any oil on the mower deck so waited a minute to then shut down the motor. I let it sit for...

Hi guys... Any Ideas what this 1970's Case 580c might weigh?? Thanks John

Anyone here used or have a PRO_TRAK trailer?? I looked at a new 14K 25+5 GN today. Looked good overall. I was actually looking at the Load Trail GN they had but can buy this one which is 5ft longer than LT trailer for the same money...Thoughts?? http://www.protraktrailers.com/ John

Hi all I am looking for a newer and heavier truck to pull my Deere 4120 and attachments around. Will seriously be looking to buy a gooseneck 14k trailer also. My question today is about the 2000 year and newer power strokes. I had a 1996 7.3 PSD 4x4 several years back and really liked it. I...

I have been eyeing the 5083E limited cab and 12x12 Power Reverser. Anybody have one or something in that series?? What do you think?? John

I have always prefered my open station power reverser 4120, however the last week or so we have had our fair share of snow and wind. Wind chills have been well below zero at times and I admit that it was chilly, so...I am going to stop worrying about the fact that I don't care much for hydro's...

South chilled by Arctic winds, record snow in East - Yahoo! News I thought global warming was...well warmer than this:rolleyes: :eek: Have a great day.

MERRY CHRISTMAS EVERYBODY!!! John

Hi guys I may give up my power reverser tranny to move up into a cab tractor. Currently looking at a 4320 cab. What would be a reason to move up to a larger tractor in this series?? I have a 4120 that does everything i would expect a tractor of this size to do. We farm 2,000 acres of...

I am thinking of buying a Kuhn GMD 500 6'7" disk mower. How fast can I expect to be able to mow with a disk mower?? Is it faster than a bush hog?? I am mowing grass fields and roadsides.

I know we all like pics of our tractors in action. We are working on a new 40x64 18ft high pole barn at my parents house. Here are some pics of the driveway construction... http://flickr.com/gp/16877020@N03/W7Ed84 http://flickr.com/gp/16877020@N03/817VE7 John

How does it work?? Does the fuel come into the bowl and then get filtered going to the engine OR Does the fuel go throught the filter into the bowl?? I have a problem tonight with my newer 2320. As I am mowing all of the sudden the engine cuts out and lowers the rpms to about 1K and then...

I saw this last night after disking a field all day and thought it was a deer but it has spots and what looks like horns or something like that. I never saw one before...

I have a 14K bumper pull trailer that I haul my John Deere 4120 with loader and attachments on. I currently use a 1990 Chevrolet 2500 4x4 truck. Is this truck rated for this load or do I need to look for a 1 ton?? John

Hi guys I am looking for a new atv for my farm and pasture maintenance jobs. I have previously owned Arctic Cat and Honda utility 4x4 atv's and was for the most part satisfied with them doing anything from trail riding to plowing parking lots full of drifted snow... I am looking for a...

Hi all Here is a link to pics of our second newborn daughter. Now due to my wife deciding the names for our kids we have McKinley (2 1/2 years old) and McKenna:rolleyes::rolleyes: This ought to be fun trying to remember names...:eek: McKenna Renee May 16th 5:27am 7lb 3oz 20.5 inches long...

I bought a 2320 last winter to help with all my mowing and other chores. My main job for it was mowing the lawn with the 62D drive over deck. Early in the season I noticed the deck height control not adjusting correctly. The dealer worked on it and made it somewhat better but now I see that...

I have a new JD 2320 with 62D mower deck. I had the dealer install the hydraulic lift for the deck and it seems to me that no matter where I set the height control knob on the floor of the tractor the deck seems to go all the way down when I use the hyd lift?? Is the height control disabled...

Hi guys I have some round bales sitting around the farm that are 3 years old. When we baled them I stacked and moved them around with my first 4120. Now that they have sat around outside in the rain they seem to be almost to heavy for my current 4120 tractor to lift with the loader. Is...

Senate passes bill to delay digital TV switch - Yahoo! News The deadline has been extended to June 12

Hello Everyone. Has anybody priced an aftermarket cab for the 4x20 tractors recently?? I have a new 4120 and would like to think about a cab. I really like the factory cabs but there is one problem with them...Deere does not offer the PR trans in the cab models and I am a diehard...

https://johndeere.rsys1.net/servlet/website/ResponseForm?qKJETB_UV_Hn_Nl_JNlm_YTVY_lHsLl_LOLgmEqiopiiHkKFRHohhDJht Hurry! These great deals end February 2, 2009 and are available through participating dealers only. Difficulty viewing this e-mail? Read it as a Web page. Hurry...

Here is what I was doing tonight. Harvest is almost over here in central IL. John

I am looking for a small machine to run a 62c deck with 14 bushel material collection unit and a 47" snowblower. I think I may at sometime need the 3pt and rear pto. I am looking at 2305 or X7xx tractors. What do you all think?? Does anyone have experience and pics of the 2305 with material...

I am thinking of putting down some more CA6 rock to store my 3 trailers and some attachments on. Do you all think I should do this up close to my storage building where I can light it up at night or put it farther off the road at the back of the property with no power, lights, etc?? I cannot...

Anyone here have a 790 with a MMM?? How do you like operating it with the MMM especially in an open field?? Can you please post some pics of the setup?? What tires do you have?? John

Does anyone own a RM990?? What is the going price for a new one now?? Woods Equipment Company - RM990 series 90” John

Hello everyone. I have good news. My new 4120 has arrived. This is the second 4120 I have owned. The first in 2004 and now this one. If I knew then what I have learned over the past few years I would have never sold my first 4120!!! I traded in my 3320 tractor/300cx loader/448 backhoe and the...

What do you all think of hauling a 4120 on a 7K trailer?? I do not want to buy another trailer but I will if needed. I am signing papers tommorow on a 4120 with 400x loader. The heaviest load would be the tractor with either the loader or RC1072 Frontier mower. I have no problem with the...

Hello all I need to know what you all think of trailering a JD 4x20 series tractor on a 7000lb trailer?? The tractor supposedly weighs 3700lbs. It will have the possibilty of having the 400x loader and 73HD bucket installed at times. I also may have a Frontier RC1072 installed. It looks to...

How many of you guys with quick attach loaders actually take them off and what for?? I seem to just drop the front bucket or forks or whatever I have on there to do my mowing etc. What do you do?? John

Has anyone heard if the driver over decks are out for a 3000 series tractor?? Are they compatible with the cab tractor?? I am considering a 3320 cab with a drive over deck mmm. Anyone think this should be a problem??

Hi all I bought a used Snapper ZF2500KH commercial zero turn mower with a 61" front deck. Does anyone have any experience with these machines?? It has 400 hrs and the owner bought it new at the end of the 2005 season. He washed and greased it every time it was used. The deck has electric...

Hi guys I am looking to see what small square baler I need for a John Deere 5203 (47pto hp)??? I was thinking either JD or New Holland brands?? Or others if it would be a better match. JD\NH dealers are close and both good dealers. I am looking for used as I am only going to bale less than...

Just wondering what is the average rate for garden tilling?? Do you charge more for a new garden than an existing one?? Hourly rate or bid?? I will be using the JD 3320 ehydro with JD 665 tiller // R4 tires. Location is small town in central Illinois. I have liability insurance. Thanks...

Hi guys My question is, what does it take to use a MMM (72") on a 3320 that is setup for a loader and backhoe?? I would of course remove the backhoe, but do you have to do anything else?? If I needed to use the backhoe in light duty digging could I leave the MMM mounted?? Any idea on cost...

Hello all, I have some fairly steep slopes I am mowing and would like to get some opinions on what you guys think would be the best machine for the job, as far as safety. Would it be safer to use a garden tractor (Simplicty Sunstar) or my CUT with finish mower (JD 3320) John

Hi all I am working on my parents 1995 Chevy Astro van. It idles rough, but runs decent at higher rpms. What do you think it could be?? John

I am looking at a 500 gallon sprayer with pto pump and it fold out to approx 30 feet. What should I expect to pay. It is in good condition, kept in shed. I am told it had set unused for the last 10 years inside. John

Hi guys, what is the proper way to say "KIOTI" JOHN

Why is the review section not working?? I have 2 wonderfull JD tractors that I would like to write reviews and really enjoy reading others. John

I just purchased a 3320 with vertical exhaust. If I were to load on a trailer and tow up to 65mph would I need to remove the top portion of the exhaust pipe or would it stay on ok at that speed?? :confused: :confused: It slips down over the lower portion, and is removable in order to lift...

Duplicate thread. Please disregard.

I took delivery of a new 3320 and implements this week. JD 3320 300cx loader 448 backhoe JD 665 tiller Frontier RB1084 Frontier RC1072 Imatch Enjoy the pics http://i161.photobucket.com/albums/t...20leftside.jpg http://i161.photobucket.com/albums/t...RC10723320.jpg...

I took delivery of a new 3320 and implements this week. JD 3320 300cx loader 448 backhoe JD 665 tiller Frontier RB1084 Frontier RC1072 Imatch Enjoy the pics http://i161.photobucket.com/albums/t215/KB9UDE/3320leftside.jpg http://i161.photobucket.com/albums/t215/KB9UDE/RC10723320.jpg...

Have any of you guys purchased or used the JD line of trimmers, saws, or other 2 cycle handheld equipment that they offer?? Who makes it and is it really worth the money?? Would it withstand commercial use if needed?? What kind of financing did the dealer offer?? I have a JDC credit card...

Hello all I am again thinking about a 3320, 300cx, and 448 bh. What should this setup weigh?? Would it be ok on a 7000lb trailer?? John

Has anyone here made a Bush Hog RDTH84 finish mower quick hitch compatible?? John

Hello everyone I have a JD 5203 tractor and I am thinking of putting a Imatch or other quick hitch on. Does anyone know if there is a kit to make a RDTH84 BH finish mower quick hitch compatible?? I had a Frontier GM1072 with an adapter kit for quick hitch. John

Well after being devestated 1 year ago with our twin babies not making it through the pregnancy due to medical complications we had a beautifull baby girl, McKinley Grace. Date: December 27, 2006 11:14am Weight: 7lbs, 3 oz. and growing!! John & Michele

I was thinking about installing a set of tires/rims set up as duals on the rear for more stability of my Simplicity Sunstar. I was going to bolt them on with the 4 all thread rods holding the rear wheel weights on now, with the weights seperating the tires. Any problems with doing this?? Would...

Hi everyone. I am looking at getting into light residential/commercial construction and landscaping. My choices right now are between 3520, 300cx, 448 or 4120, 400x, 448. Which would you choose and why?? I like the 110TLB, but it is out of price range right now. We do not dig very many...

Hello everyone I was wondering if a 5203 with 512 loader would handle an older 8ft bush hog mounted on the 3 pt hitch. It is a heavy duty model with a cylinder setup on the rear wheels for total control of height front to back. The last tractors to run it were Farmall 806 and JD 4520(AG...

Could someone give a ballpark price of a Kioti CK20HST TLB in Illinois or other areas. John

Good Morning I am looking at a used simplicity sunstar with 450hrs. The dealer (not simplicity) is listing it as a 1999 model. According to a web site I found it says that the sunstar was replaced by the legacy model in late 1997. Does anyone know if this is correct?? Is it possible the...

Hi everyone. I installed a canopy on my 5203. It is an awesome product and I would recommend it for anyone who wants some shade. Link to Sun Guard http://www.sun-guard.com/ I will email pics if you would like. jphippard@yahoo.com John

Hi everyone. I installed a canopy on my 5203. It is an awesome product and I would recommend it for anyone who wants some shade. Link to pics of my tractor http://pg.photos.yahoo.com/ph/jphippard/album?.dir=20a6re2 Link to Sun Guard http://www.sun-guard.com/ I will email pics if you would...

Hello everyone, A friend of mine bought a new JD 5203. He went to put a off brand category 1 quick hitch on it and it will not fit!! On the lift arms there is a pin with a cotter pin that I am assuming comes out for changing the balls out for cat 1. It seems to be blocking the quick hitch...

EBAY ITEM NO. 8823530902 Once again my 2520 pics are being used on ebay as a scam from the UK!!! I have contacted ebay so hopefully they will have it off soon. The 2520 and attachments are still for sale and I will be accepting offers on the equipment. John jphippard@yahoo.com

Hi everyone I just wanted to let you all know that my 2520 auction from a few weeks ago has been copied again!!! Item number: 7625530305 THIS IS NOT MY AUCTION. IF ANYONE IS INTERESTED IN THE REAL 2520 PACKAGE YOU CAN CONTACT ME. John

On ebay now ending Sunday afternoon is a 62D ON Ramp drive over deck and 54 inch hydraulic front blade for 2520 and small 4000 tractors

Greetings to all!! I would like to know how a 990 compares in size to a new 4020 series?? Is it closer to a 4000 or 3000 size?? I would also like to know opinions on 990 vs 5103. John

John Deere 2520 200cx loader 62d mmm 54\" FB 14 hrs If anyone is interested in a 14hr. JD 2520 with loader, mmm, front blade please contact me. I will be selling mine due to massive medical bills. It is still in great shape. Mows like a dream. I will be listing in the classifieds later on...