Search results

Results 401 to 600 of 1192
  1. T

    Kohler 7000 series kt735 ACR

    No ACR. If they don't crank over well, your most likely dealing with a tired starter. Many get replaced. They have been updated several times. Suggest an OEM if you replace. Of course, you should verify your battery condition by having it load tested and that things are happy under your valve...
  2. T

    Repower XT1

    It really depends on the rest of the machine if it is worth the expense. You may want to make sure that you can drop the pulley for the traction belt ahead of time. Many of these are a bugger to extract. If it comes off mark it the direction it came off, if not order a new one. A different type...
  3. T

    Can't believe Sams Club did me this.

    That Firestone recall came out at the right time for me. Tires were OK, but got into something out on some forest service roads and had 2 go flat. 1 dead. I was able to make it urban enough with a little compressor I had. Dealer said go get new ones, 4 or 5 I don't remember now. Brought him the...
  4. T

    Drive issues w/ John Deere Z-track Z535M

    So this is a single belt, but your logic is good. Several times I have seen ZTRs with a lazy side and it was simply the belt not being up to par. Or the bypass not fully disengaged. You could also call Tuff Torque too. They do have a decent CAC. I assume these would be about 1000$ a pop. Maybe...
  5. T

    Toro Z Master 4000

    That's a little bigger than I normally see, but I do like the My Ride.
  6. T

    Vise (vice) on ballast/counterweight?

    If you were concerned about the stick out from the back when you're getting around, you could pin the receiver between the uprights for transport. Weld a couple tabs on or something. That's a little bit of ballast!
  7. T

    Using oil in a diesel engine that doesn't say for a diesel.

    Thanks. I figured as much. Asked a guy with a aged Duramax what he used, Delo or? I guess its eaten regular motor oil all its life. At least when he did the oil changes which I assume to be 90% of the time.
  8. T

    Menards Sales: Love/Hate

    I liked Menards when I lived in the Midwest. Lots of variety on building supplies. Couldn't figure out why you'd go to Home Depot and have to load up your lumber and drag it through the store. Of course, the guy at the gate at Menards was packing heat for some reason. Though I don't know if they...
  9. T

    Using oil in a diesel engine that doesn't say for a diesel.

    Does the same apply for diesel pick up trucks?
  10. T

    Y'all Been Checkin' Lumber Prices?

    I hate picking out lumber. Invariably I focus on one thing or another and end up with stud with a wow one way and a bow the next on at least a few. That's their formula for getting me to buy extra. Darn Home Depot Enchanted forest anyways.... ;)
  11. T

    Well Pressure tank sound like?

    Thank you for all the good input. This gives me some tools.
  12. T

    Ignition key

    My LS was the same. Cut the bent key off and fit it in metal water halve handle. It's been great since.
  13. T

    Well Pressure tank sound like?

    So as I think about this, should I be checking water level and what it draws down at to confirm if that has remained much the same as when it was put in? If I had to go lower into the 4" PVC section, one would buy a 3" pump rather than a 4"? Disadvantages to know with doing that could be good...
  14. T

    Old Window Greenhouse

    Greenhouses are such an individual thing. Seed starters VS a constant use GH, what you grow, when you want to grow it, where you are make it -a living breathing thing really. Ventilation always seems necessary and it is good to be able to vary the amount due to heat and humidity. Shade cloths on...
  15. T

    Old Window Greenhouse

    I'd say that a 2x6 is a better solution for a leak proof roof, let alone if you get snow. We don't get much snow by me, well just got 10" but.... So I've done well with 2x6 rafters on my leanto and loafing shed. On the last one, thought I'd notch them for the 2x4 purlins. Both hold up 12' steel...
  16. T

    Well Pressure tank sound like?

    That makes sense. What also makes sense was for me to look at the controller. Here's the info: Grundfos Submersible Motor Control SA-SPM4 Model 82456902 HP ½ VAC 230 Phase 1 60 HZ 3450 RPM SFA 6.2 SF 1.60 Code M MFD 59-71 2060 Cont. Duty Automatic Thermal Motor Protection
  17. T

    Well Pressure tank sound like?

    I'm revisiting this while I have some time to think this through, maybe have a better understanding of my well and its design. Then if needed, I can source a good quality pump and other materials. Or if I have it done, can make a more informed decision. Or maybe there are other things in works...
  18. T

    Old Window Greenhouse

    We did a solar greenhouse at the last place. It had 10 patio door glasses @ 60 degrees on the face of it. I built that frame out of scrap 3" channel in kind of an A frame from the side view. Had garden beds inside, even did aquaponics. Trimmed the outside of the glass so it looked nice. Some of...
  19. T

    XJ 2025H lock out switches

    Hopefully I can find some info. Info on the loader valve itself is about nil. Besko loader valve 801z1-8000 on mine. Have you removed the boot on the valve itself to clean and lube up the works? When connecting hydraulic hoses: Loader down/retract cylinder, yellow coupler (1). Loader...
  20. T

    @#$%&* B&S. Hard Starting....

    Makes more sense. Thanks.
  21. T

    @#$%&* B&S. Hard Starting....

    Sure. All you would have to do is get a pickup and grommet for a newer version. I'd probably plug the old one and bore a hole in a convenient location. You don't really want to have the tip super close to the bottom as to not pickup debris. That's Deere's fix for those customers that keep...
  22. T

    Country Clipper?

    The joystick is pretty nice to use, I'll give you that.
  23. T

    John Deere Z425

    The charging system is more than enough to power the pump, even if it is constant run- which is not typically the case. Once started, the other load on the system is just the anti-backfire solenoid. Edit: Looked it up, it is a 16 AMP.
  24. T

    @#$%&* B&S. Hard Starting....

    Well look at that! :)
  25. T

    Country Clipper?

    I would say that they are kind of similar to a basic Ferris as far as quality. I have a regular who has a Brat, rarely do I see another. His has a joystick. Packs grass around the engine compartment and pumps like crazy.
  26. T

    Great small engines test video

    Missouri I think? He talked once about his desire to raise and market grass fed beef. He's a good egg and am glad he is successful. There is Adblock for most of those annoying yet monetary ads on YT. I too enjoyed the engine one.
  27. T

    @#$%&* B&S. Hard Starting....

    Yep, there's a grommet. Common to find if you need one as it's the same as many others. It isn't a bad idea to inspect the pickup tube and clean the tank, but you haven't had any other runability issues like fuel starvation at low fuel levels, intermittent supply issues or the such have you...
  28. T

    Cub cadet RZT left side slower

    It's worth a look at the fluid level and to ensure that both bypass rods are in drive mode. From there it may be your adjustment. Strangely enough though, your drive belt can be a factor. I've seen it before. Doesn't matter what it looks like. If you feel your adjustments are good and it just...
  29. T

    John Deere Z425

    Powering a sprayer isn't typically a problem. Heat of the exhaust or weight can be, more so if the terrain is a factor. Consider a front mount.
  30. T

    Mexican restaurant ground beef

    I know what you mean. For me, this adobo paste works great. Slather some on a wrap or put it in some meat sauce. More flavor than just heat. My wife gets bothered by too much pepper aroma so this saves me! https://www.fronterafoods.com/cooking-sauces/chipotle-pepper-adobo-seasoning
  31. T

    @#$%&* B&S. Hard Starting....

    And a quick search of "@#$%&*" in the Equipment Description field confirms that!
  32. T

    @#$%&* B&S. Hard Starting....

    So on your E180, pull the terminal block off both the PTO and key switches and look for a burned / broken / corroded terminal. Come across this reasonably often. You can fiddle with the individual wires behind the block while attempting to crank w/ the park brake set. The seat is not in the...
  33. T

    Bought a Toyota Avalon

    It's been a little while, but I asked my uncle where his Avalon went. They would trade cars every few years, but the Avalon was maybe a year old. He said the Avalon was the best car he ever owned, but your aunt wanted another Buick....
  34. T

    Small 1-2 gallon Yellow Diesel jug

    I have to say that my small diesel cans are yellow spray painted gas cans. People leave me so many of their small cans when they have crud in their fuel system. I just wash them out and toss them up above when dry. The yellow paint I had and have stuck good enough to the cans for many years. I'm...
  35. T

    @#$%&* B&S. Hard Starting....

    Nope. Maybe the diode is throwing you? There is a diode in twin cylinder harnesses between the ignition coils. When you turn the key off, there is a ground present on that wire. That kills the spark. The rest of the key positions nothing should be present. Power sends the CD in the coils to...
  36. T

    @#$%&* B&S. Hard Starting....

    So you should have power to the fuel shut off solenoid, but none to the coils. So in a moment of testing, don't put power to them. Yours would have the fuel solenoid straight down out of the bowl unless the carb was ever replaced. On these you do have to remove the bowl to get at the solenoid...
  37. T

    @#$%&* B&S. Hard Starting....

    To try and run them dry for intermittent storage, the lower seal would be sitting in fuel either way. The mains may not be though? BTW this lower seal and the moth seal above the fuel pipe can both be contributing factors to the extended cranking cold.
  38. T

    @#$%&* B&S. Hard Starting....

    If you think about the design, once the fuel level evaporates just a little bit in the carb- the float lowers opening the inlet. These little disc pumps don't have much in them for a check valve, so it is kind of like letting the finger off the top of a straw and the soda runs back. So when...
  39. T

    Cub Cadet GT 2550, 2006 shaft drive, Can't get the cruise/parking brake to engage, only need another 1/16 on an inch to engage/lock on or cruise on

    Is is possible any debris is in the way? Otherwise possibly the brake is set a bit tight.
  40. T

    Boomer 24 front leak

    Good deal. Hope that this is behind you now.
  41. T

    Steel barrel uses - need ideas

    Barrel for metal that is heading to recycling?
  42. T

    Boomer 24 front leak

    There is no reference to rest it on top, just to unscrew and check the level.
  43. T

    Boomer 24 front leak

    The key with getting the proper level is patience. Fill it. Walk away. Fill it. Take it for a spin. Walk away. Rinse and repeat. You may also find that it doesn't like to be filled to the upper line.
  44. T

    LS paint

    I could be the difference between the rattle can and the paint out of the pail. I guess they don't call them time bombs for nothing. I bought a gallon of Safety Blue when I got the tractor. Still looking good, though the tractor is undercover and not in direct sun as it sits. Those little...
  45. T

    LS paint

    The old body shop manager used to tear a match out of a matchbook and dab the little chips with the torn end. Worked slick.
  46. T

    Hey....Coffee Lovers.... question...

    I'm sipping on a cup of something different that I picked up at the store. We usually get Tony's coffee, but sometimes I like to mix it up. And mix up I will do. The stuff I got is so smooth, it's like it isn't even there...
  47. T

    XJ 2025H lock out switches

    Let us know what you find. Should you need a another page, let me know.
  48. T

    Boomer 24 front leak

    I've not done that repair. Your vent must be on the other side. What I can tell you is on mine, I would get seepage from the vent itself. I think from the factory they just fill with the hydro oil. After I changed the oil (GL4 SAE 80W), I didn't have an issue. Mine, I would clean up and monitor...
  49. T

    XJ 2025H lock out switches

    Is there something specific that you think may help? A good reminder to is to cover the basics. IE have the battery load tested, check grounds and main terminals for corrosion etc. I'm sure you are very frustrated with the old girl.
  50. T

    Hey....Coffee Lovers.... question...

    Yeah these are nice machines to have. I wouldn't call myself a coffee snob, but getting used to good coffee keeps you from just grabbing a cup from just anyone. Do you find that too? Man, some of this black liquid they call coffee....
  51. T

    XJ 2025H lock out switches

    Strangely enough in the starting system section, it references only the 4 fuse MEC diagram rather than the HST model. That's the difference in the fuse block. Post # 5 at least shows the proper diagram. Right now everything is absolutely dead?
  52. T

    Hey....Coffee Lovers.... question...

    Hopefully you have a bit of time left on the old one...
  53. T

    Hey....Coffee Lovers.... question...

    Honestly, I wouldn't replace it unless you felt its time was getting near. But we aren't ones to buy the latest and greatest. Plus there is comfort in knowing what you have will take care of you. Some different feature on a new one she's missing? BTW, we've had a super automatic for years and...
  54. T

    repairs

    Welcome to TBN. Is there a history with this or has it been sitting? The governor would typically rest at wide open throttle, then pull back as it runs. To me that indicates something binding- such as the throttle shaft itself. So are you manipulating the shaft itself or the linkage?
  55. T

    Can someone suggest a primer or sealer for metal?

    I have one of those trucks that the paint falls off the hood. So I stripped it down to the metal mostly and need a good sealer / primer. The end game here is to do a vinyl wrap on the the hood to make things easy. What I need to do is protect the metal and give a place for the wrap to bond to...
  56. T

    Replacement lens & backup helmet?

    I had a basic Amazon helmet which I see is NLA. The lens worked well but the rest of it was hard to keep in position. Flimsy. A basic Tweco helmet with the 4 sensors is good. That is my back up. I spent a few more bucks and got a nicer Lincoln wide view that I really like. Optrel can KMA after...
  57. T

    You'll correct this.

    We've done major paver work twice. 30-40 pallets worth between the two. I'm happy to say that the misses laid nearly as many block as I. (print this off and show your wife :)
  58. T

    Help on a buzzing sound from a Jura Impressa F9 coffee maker

    It is a different design than the brew group on our Saeco for sure. The one we have now is at least 15 years old. The one prior was a different design. On that one, it seemed easy to flip the mechanism "out of time", so maybe it is a positional thing. I'm sure you'll find a better answer. A...
  59. T

    clean air filter

    It's best if you blow across the media to get the bulk of the debris. Should you feel you need to blow it from inside out, use a low pressure. Ruptured media doesn't help things. When it gets real emission stained, turns grey- best to replace. If the rubber that seals around the inlet slips on...
  60. T

    New Holland Boomer 24 S3L2 engine

    Sounds like my old Mopar days.... Your cheapest way out of this is get a used flywheel and plate that were mounted together. Then comes the question on whether or not the new iron has the provisions for a pilot bearing. I think my XJ is the cousin to the 24. Has the same engine. The parts list...
  61. T

    Kohler CH20 needs better air cleaner

    The elbows that adapt the HD kits may be available as a service part. 24 743 20-S is what I see from here for the kit. I suppose that it could be located outside the hood if you really felt the need to upgrade. Breather hose and mating gaskets good on the inlet?
  62. T

    Montgomery Ward 11hp 38” deck

    Here is a parts link for you. https://www.jackssmallengines.com/jacks-parts-lookup/manufacturer/mtd/mtd-legacy-1985-2005/montgomery-ward/13-lawn-tractors/1990-models/montgomery-ward-mdl-tmo-33937a-139-658f088/parts-2 There are old manuals that are probably still accessible on the web. These...
  63. T

    Anyone fix up their Milwaukee drill?

    I had a Fuel 1/2" impact that just dropped dead one day. I was in and out of that thing, couldn't make heads or tails of why. Then it worked and never quit. On this drill the sell the switch with the board and brushes. It's at least a $70 gamble. Brushes are cheap enough. I'll split it and check...
  64. T

    Anyone fix up their Milwaukee drill?

    My M18 2611 hammer drill seems kind of wiggy lately. The trigger feels normal, but many times you squeeze it and it starts up slow. Or then goes normal and then slows down. Next thing you know it runs up normally. Anyone ever deal with that? I've taken A couple Milwaukee things apart. This is a...
  65. T

    New (to me) 2019 XJ2025H

    Welcome to the group. Our little XJ has worked out great for us and I hope for you too. There is a member here who hasn't posted in while but has a some good videos on YouTube with his XJ. JIMeRIG is his handle there.
  66. T

    D-160 mower

    One would assume that the fuse is good if it runs when jumpered across the solenoid. That is unless the little solenoid below the carb isn't working. The fuse is near the battery. Anyways besides the brake switch, the PTO switch is also in the crank circuit. Best advise would be to remove the...
  67. T

    I had to use the laundromat tonight... my house STINKS!

    Glad that we didn't have a laundry leak in this old house. I learned though that our stack was 1 1/2" Our front loader is almost 20 years old. They say the new ones need a 2" stack for sure. So yet another plumbing update for me.
  68. T

    XJ 2025H lock out switches

    The parts list shows 1 each or 3 different relays. Nothing specifically designated as a controller. 40007175 RELAY-START-TRG750, 40007122 RELAY-ENGINE STOP-TRG750, 40198043 RELAY-TWIN-TRG750 . There is an engine control G100S01-04 . Below from the service manual.
  69. T

    XJ 2025H lock out switches

    Excellent! Glad you got her going. On your tilt, unhook your hydraulic couplers and snap them back in and see what that does for you.
  70. T

    Anyone added insulation for sound deadening?

    As I read all these great replies the heat kicks on. Then the light bulb in my head also came on. The laundry has a cold air return in it. Metal ducting. This might all be mute, but I'll do a test run. Peter, you are correct on the noise of these dehydrators. My local HD looks like they have...
  71. T

    Anyone added insulation for sound deadening?

    Our interior walls are 2x4 and uninsulated. Right now I'm redoing drywall in the laundry room that backs up to our master closet and part of the master bath. The wife runs one of those food dehydrators with a constant fan running. My thought was this laundry room is nice sized and could be a...
  72. T

    Cutting 2" hole in 1/4" SS plate

    To hold your coolant at the cut, use some putty or a quick bead of caulk. In the circle and outside.
  73. T

    Cutting 2" hole in 1/4" SS plate

    I don't have any idea if these are good for stainless, but I just bought a basic set of them hoping that they would be. I have literally piles of stainless that I need to learn to work with. https://www.amazon.com/dp/B0B1ZCZJQZ?ref=ppx_yo2ov_dt_b_product_details&th=1
  74. T

    Kohler Ignition coil upgrade ?

    I can't say that I've seen an upgrade on these old Kohlers. Rarely see them at all anymore. I'm guessing that you are talking about that old twin modular coil that Kohler is real proud of? Engine model and spec#s are real good in these situations. I suppose that you could put on their...
  75. T

    Battery Hard Wire

    Back when I lived in the frozen tundra, I used to have a small disc plug in heater just to warm the inside of the rig before I headed out. Made it more bearable when it was -20. Any heater in small cab tractor I would think that it would depend on how long you used the tractor to make it worth...
  76. T

    Titan Attachments on Amazon

    At my home, we can't accept a tractor trailer. Generally we just request a straight truck from the destination terminal. I've had motor companies sub the final delivery a time or two. Usually they lift gate, but we have forks too. The only time we couldn't get them to put the load on a...
  77. T

    Briggs and Stratton Endurance 20hp blowing blue smoke

    Randy, do you lube your head bolts? The ASPI doesn't call for it, but the earlier service manual does.
  78. T

    Briggs and Stratton Endurance 20hp blowing blue smoke

    I don't do a lot of engine mechanical work other than OPE. I've seen copper head gaskets in the past, just not on aluminum. Here's a link to a 31" gasket. They suggest using Gasgacinch sealant with it. 2201 .032 Copper Head Gasket for Briggs Model 31 OHV - EC Carburetors
  79. T

    Briggs and Stratton Endurance 20hp blowing blue smoke

    I've seen copper head gaskets on the web for these. Electrolysis an issue? If not, I'm not sure what there is to lose.
  80. T

    Briggs and Stratton Endurance 20hp blowing blue smoke

    Something also that I use when I can't read a model number is my QR code reader on my phone. It doesn't let me down too often.
  81. T

    The Life of a Custom Mowing contractor

    These are the most awesome blackberry eradicator ever. I have the Oregon version of these. Will do double duty on the rest.
  82. T

    XT3 GSX with 60" Fab Deck - Bagger Discharge Elbow?

    They do work well. So DR also doesn't offer the proper boot adapter for your deck? If you haven't contacted them, you should.
  83. T

    Steel Sawhorses folding leg hands on experience ? Toughbuilt/ Wen Wa/ Bora etc ?

    I have a set of the Home Depot. Very solid. Sit outside half the time , rusted, beat but still work well. I used them more for metal projects really. I adjust the leg height to hold long stock. The plastic ones are great tho when you care about your saw blade when working w/ lumber and your too...
  84. T

    XJ2025H Mid mount mower issues

    I wouldn't know one from the other, but I think Taesung builds them for LS, TYM, KIOTI. Maybe that gives you more better options?
  85. T

    JD 345 fuel pump

    I looked at the IPL and it looks from here that this one has a standard pick up tube. Apparently though, the 345 has some that have a return line which looks to come off a y fitting near the pump? I've not ever had an issue, but a possibility?
  86. T

    JD 345 fuel pump

    You could hook a 1/4" piece of fuel line on the back of the filter and drop into a fuel can and see if it is pumping. If not, pull the pump and see if the push rod is actuating.
  87. T

    Z930M on order -> Arrived

    This could work out well seeing as the the OP's misses will be mowing. You have a pair of something nice under the tree Dear. Something metal. What could it be? ;)
  88. T

    XT3 GSX with 60" Fab Deck - Bagger Discharge Elbow?

    Yeah, they shouldn't sell a bagger that fits 3 different size decks in both stamped and fab'd pans. Stamped need an adapter, 731-10133. Will it fit your 60?
  89. T

    Z930M on order -> Arrived

    Sweet! Spring is going to seem slow to come next year I bet.
  90. T

    cub cadet xt2 l46 (kawasaki) starting issues

    So if one spark plug was dead, is it possible that the engine is flooded? Was the plug fowled or simply wouldn't spark? Is the oil level high and has fuel in it? For now confirm spark on both cylinders and that the little solenoid at the base of the carb is activating when the key is on.
  91. T

    F525 front mount mower

    This is one of those things that have a narrow following of people who love them. I'm not one of them and they don't come in my door. I'd say if you're looking for a new adventure, maybe go for it. Looking for a turn key and easy care? This isn't it.
  92. T

    XJ 2025H lock out switches

    Couple of snippets from the manual: HST Neutral Switch - Located on the right side of the tractor, underneath right operator's platform. Senses HST pedal position for tractor safety start system. SAFETY SWITCH FUNCTIONS 1. When the PTO switch is in the OFF" position, the PTO switch completes the...
  93. T

    About painting a steel sided building

    Rustoleum should adhere great. I would be worried about fading, maybe it would be not noticeable in white? I've read where people doctor the paint up for spraying. Anyone done that on a larger project?
  94. T

    About painting a steel sided building

    I'm thinking about sprucing up my old pole building. Everything I've built since is white, but the 1998 model pole shed is that lovely beige. Some talk about Sher Cryl by Sherwin Williams. I haven't investigated it with my local paint store though. I did paint a small building that we made with...
  95. T

    Almost Heaven Lawn Mower Graveyard

    A great business. It is disappointing that the couple I've seen online won't pull and ship parts. Could be a good side gig for someone to do so.
  96. T

    Front-End Loader Best SSQA trailer mover attachment?

    Here ya go. Quick, simple , effective. It's great to have if I have the backhoe on or another implement besides the weight box.
  97. T

    Interested in a Vintage Tractor

    Works of art they are. Thanks for sharing.
  98. T

    Front-End Loader Best SSQA trailer mover attachment?

    Yep. But a person can take the same ingenuity and make a drop for the ball, provide the OP welds.
  99. T

    Front-End Loader Best SSQA trailer mover attachment?

    I just welded a hitch receiver tube on the center of my bucket. Then made a lowering bracket out of a piece of channel with a ball on it. Also have a fixed hook and an extended arm with a chain if I have to get up inside something to chain up and pull out.
  100. T

    Have metal carport prices started to decline yet?

    Oh heck no. They're still adding a 45% surcharge. I was going to do a tube frame loafing shed. You see an ad for X, write them for the proper quote and it was almost tripled. Built a pole shed version instead.
  101. T

    New Stens Shield Hydraulic Oil for Full-synthetic, 5 Gallon pail

    I've not used this but have other Stens Shield oils with no issues. I wouldn't have a problem using it. I used Amsoil last. All they show on Stens.com is the SDS. You could probably call or write them for better info.
  102. T

    2010 Cub Cadet LTX1040 Hour Meter Question.

    From here it looks like you have closer to 50 than 500 hours on the clock. I'll bet the rear deck lift arms aren't all hogged out, the steering is tight and the rubber doesn't look work. Enjoy your new ride!
  103. T

    2010 Cub Cadet LTX1040 Hour Meter Question.

    These have a little CD in the hour meter assy that if that goes bad, it loses its memory with no power to it. I asked about the seat switch as the 4 pole switches on many complete the circuit to the hour meter function of the module. That way if the key is left on, the meter doesn't rack up the...
  104. T

    problems with my john deere x304 2015 deck

    What I do for reference is to measure below the blades side to side, check pitch and adjust if needed. Rinse and repeat. Then set the wheels ~ 3/4" off the concrete. 1) The blades cut the grass, not the bottom of the deck. 2) A 42" deck hardly needs them at all and isn't meant to be used with...
  105. T

    2010 Cub Cadet LTX1040 Hour Meter Question.

    Maybe it's 53.5? If you have a 4 wire seat switch, had someone played with the wiring?
  106. T

    Cub Cadet ZT-2 54" blade question.

    Be sure and either start a thread or post pics anyways. They could be helpful for anyone considering similar mods.
  107. T

    Cub Cadet ZT-2 54" blade question.

    Cub has round hole spindles, usually that's their HD spindle with Timken bearings. Aftermarket and OEM both are available as well as star blades. S blades went on their awful quick attach hubs as well. A lot of their 50/54 " decks offered both round and star and you have to look and see what you...
  108. T

    Cub Cadet ZT-2 54" blade question.

    Your mower is an otherwise nice mower. Lots of thought went into it. I don't see lots in the L&G business that gets my goat, but these CUB blades do. So you know what their "thought" on the blades was when they thought they would rope people into buying them. Many years ago, MTD patented their...
  109. T

    Oil change intervals

    Oil threads seem to bring out the opinions from everyone, not sure how many of us are oil experts! I'm sure there are many factors in determining when to change your engine oil. But I think certain engines need a bit more care in that department. These newer boosted engines seem to be happier...
  110. T

    Honda GCV160 No Spark

    Is it possible that the spark is there but not visible with your testing method? You don't really say anything about the equipment history. I don't know if it's possible to install the coil flipped, but is the kill wire on top or the bottom?
  111. T

    Loctite, where to use or avoid

    There is a lot more out there than the 242 that you grab from the hardware store. Gels, pens, tapes, sticks, liquids. One thing I really like is the VC3 as it is both removeable and reusable. It isn't a typical red in strength, but works well for mild vibration issues. Vibra-TITE
  112. T

    Oil change intervals

    It's that new chipotle scented oil! Couldn't resist.... ;)
  113. T

    Loctite, where to use or avoid

    One qualifier in using Loctite red would be whether or not you could safely heat the part if you need to extract the fastener. Another might be your darned if you you do and darned if you don't. IE I've locked small engine sumps with it that were problematic. Because if it ever fails, it isn't...
  114. T

    Loctite, where to use or avoid

    The key too is to use it properly. Clean, prime what you have to etc. Vibratite is a great alternative to Locktite for some applications.
  115. T

    Oil change intervals

    The best advice on a new ride is to check and see what the techs say. Whether that be at the service counter of the dealership, checking you tube re engine failures for your particular engine. Sounds strange, but there are good techs that put info out there.
  116. T

    Motor oil $$ Up or down?

    I ended up buying about 70% to get us through spring season and what ever will be will be.
  117. T

    Have any strange delivery experiences being rural?

    We've certainly have had USPS issues, but the gal we have now is great! Another strange delivery we had was gravel - before we had the tractor. As I was coming home, there was ~ a yard of gravel down at the main road by our mail boxes. As I make it to my driveway, about the same at the end. The...
  118. T

    Have any strange delivery experiences being rural?

    Had kind of an odd experience today, at least my wife did. Home Depot apparently sublets their deliveries now? Anyways last week got a call on delivery day from a driver asking if she could get in and out with a tractor trailer. Nope was my reply and thought darn I should have noted that with...
  119. T

    Motor oil $$ Up or down?

    I use a fair amount of engine, transmission oils etc. With the uncertainty of availability and pricing , I bought it all last fall which turned out to be a good thing. Has anything really changed on that front this fall? Pricing is still at a much higher level than last fall for me though. I'm...
  120. T

    Deere LX266 engine model number

    You bet. If there's no fuel dilution of the oil, I'd pull the head first.
  121. T

    Setting up carburetor idle position of governor after new carb install. Husky 22HP twin B+S, Engine #44R677, Type# 0021677, Nikki dilution carb.

    I have no idea what a Zenni dilution carb is, but a couple of tips on what goes wrong as it pertains to the OEM> First know that there are different OEM carbs for these. One has two holes in the throttle arm, the other one. If it won't idle down there are a couple of assembly mistakes that can...
  122. T

    Deere LX266 engine model number

    A quick tip if you haven't torn it down yet, oil burning on these is more likely to be a head gasket. Though she does have a few years on her.
  123. T

    B&S carb

    It's a bowl vent. Looks to be a Vanguard. Float valve issue if you are lucky enough.
  124. T

    Tractor Museum

    Wow. Thanks for the share!
  125. T

    2004 Mazda B3000 V6 3.0 should I change water pump after storage at 83,000 miles

    Something not mentioned that I would do is grab a hose and do a water test, especially the back window.
  126. T

    Need advice/recommendation on repair/rebuild/replace Kohler KT735

    Nice job on the muffler set up. A lower tone than what you had I'd think.
  127. T

    Cub Cadet ZT-2 54" blade question.

    I agree with you 100% . Me? I would look back at like decks with the old style star blades, replace the spindles and be done with this.
  128. T

    Need advice/recommendation on repair/rebuild/replace Kohler KT735

    I doubt that there is a fastener for this. Some manufactures are great about protecting the drive pulley w/ anti seize, others not. I assume that you've checked the IPL. Do you have a way to cut the crank above the whole mess so you can work at extracting the pulley?
  129. T

    Need advice/recommendation on repair/rebuild/replace Kohler KT735

    I don't do a lot of engine swaps from one brand to the next. I have run into the need to switch out the exhaust pipes when I have though. If Ariens had offered like machines with a Briggs, those pipes may fit or maybe the muffler can be swapped. Oh joy, more expense.
  130. T

    Cub Cadet ZT-2 54" blade question.

    Snap a pic of the actual model tag. Along side the tag there may be a listing of common part numbers which may help. Spindles may very well be interchangeable, shafts I'm not sure. Does yours have the quick attach spindles? The thing with MTD spindle bodies is that at glance one they seem the...
  131. T

    Cub Cadet ZT-2 54" blade question.

    If it is the new S type blades, there aren't aftermarkets for them at this point. Availability of the OEMs isn't the greatest either. I hear what you are saying though. Pre S type Cub blades may not be very robust, but these are extra thin and disappointing for really in other respects are nice...
  132. T

    New to me JD 430, 60” deck…

    She's a beast. Congrats!
  133. T

    B+S Engine # 44R677,Type0021-G-1, Twin Cylinders. Carb with Gov. install problem.

    It sounds like you have a couple of variables. You didn't say if you put an OEM carb on, if it is a 1 barrel or 2 barrel. It may be possible that if this has the swirl plate (stamped steel gasket like thing) backwards that it could be interfering with the throttle plates. It isn't typically...
  134. T

    GT235 Problem

    The reverse switch at the transaxle I see from time to time that will disengage the clutch. Thinking of something that would shut off the tractor as well could be seat switch related or the modular key switch.
  135. T

    photo of doolittle trailer purchase

    If'n you meant to post a photo, it didn't make it here through the tubes... Unless a dolittle trailer is imaginary so that you really don't have to haul things.;)
  136. T

    Toro Outcross

    20 MPH reverse. Gotta have that! Depends on what sheet you look at.
  137. T

    Buying a new truck ? Times have changed.

    I am right there with you. I would like to know what I'm buying. My newest vehicle in pretty much no frills and an 08. I know that I'm screwing the economy by keeping my older vehicles running! I'd like to think that your salesman is incorrect about not having inventory ever again. One would...
  138. T

    Replacement belts

    Stens and Rotary can have good belts for certain applications. It is hard to make a blanket statement though saying that just because there is a cross that it is a good cross. Experience is about the best teacher when it comes to belts. This year I've seen something that I have not seen before...
  139. T

    JD 185 service questions

    I think you have an Eaton by the build. We used to use 10W30 which is a similar weight to Low Vis Hyguard. Your tractor isn't in the lube chart- says refer to manual....
  140. T

    really loud like hole in muffler and running horrible

    It can be simple like loose rockers or more involved like a head. Removing the valve covers itself if they are accessible could tell you a lot.
  141. T

    Boomer 24

    Must be photoshopped. Notice it matches the truck. ;) Great little workhorse, looks surprisingly like mine...
  142. T

    really loud like hole in muffler and running horrible

    I have a customer with a 4500 and a Kawasaki engine. In any case, if these twins lose a rocker, pushrod etc. they will do that. I'd pop a valve cover or two. A compression test will be telling as well.
  143. T

    Boomer 24

    Neat. What implement are you using to maintain the roads?
  144. T

    Kohler No Longer An Option on L&G Tractors?

    Interesting point of view. I've worked on a lot of Commands that were on fairly basic mowers too though. The accelerator pump observation was that it was costly and really not necessary sitting on something like a HOP with a 48" deck. I'll tip my hat to your comment about the larger decked...
  145. T

    Kohler No Longer An Option on L&G Tractors?

    From what I see a Kohler Confidant is about as good as a recent Briggs Intek twin. No real issues with the Confident in my world. Rather see a Kawasaki sitting under the hood though. Used to love the Commands. They can be a bit overdone. Did things to them that never should have hit production...
  146. T

    What's Your Favorite Sandwich...???

    All this talk about burgers. I asked the butcher once to grind up the brisket with the cap when he processed the beef. Said he never got that request before. Made real good burgers mixed with the other ground beef as I recall. Today, smoking the white half of a turkey for sandwiches for the up...
  147. T

    LA125 Overhaul

    Yeah, I'm still waiting for what dressing sticks to a piece of graphite. :) This actually is not an adhesion problem with these BTW.
  148. T

    Deere 62c deck anti-blowout kit... what's it for and should I get it?

    My experience with these kits is that they help improve bag-ability. Hopefully you find someone with experience with these on your machine. Isn't much for free nowadays, especially at the Green and Yellow store.
  149. T

    Well Pressure tank sound like?

    That sounds about right. For those in know, does the AMP draw look good? Do I assume that these pumps also physically wear? After an hour with the pump still running, pressure of 54 I did the ice cube trick and counted 4 seconds. At some point soon, I need to get the pressure off the system and...
  150. T

    Well Pressure tank sound like?

    So our well's output has always been steady, but low output relatively. We had a well test done a few years back and output was rated at 5 gal/ min after running for 2 hours or whatever. That was also the original output test when the thing was put in 25 years back. She's had the water sprinkler...
  151. T

    Well Pressure tank sound like?

    For now, here is the other half's notes: Pressure got down to 36-37 filling the barrel - pump kicked on ~42, fell to about 38, then back up to 42-43, then slowly fell to 36-37 while filling; took less than 10 minutes to bring pressure back up and kick off. I don't think a knew what HP it was...
  152. T

    JD 54' DECK FOR LA 175 - CONTINUED

    Sounds like you did the right thing. They either want your business or they don't.
  153. T

    Well Pressure tank sound like?

    I didn't think to grab a new valve core whilst I repressurized the tank. It did pass the spit test... Will see how she does tomorrow for watering. The temperature is 40-45 degrees warmer than January when I put things back together. 6-7 PSI seems like a lot. The pressure gauge variation threw...
  154. T

    Well Pressure tank sound like?

    The misses gave me shout today saying no water. She had been watering a lot this AM and pressure went away. Smart girl that she is, she hit the web and looked for things to check. In January I put on the Square D pressure switch new that had the arm on the side and the feature to shut the pump...
  155. T

    LA125 Overhaul

    The OEM gasket has a slight embossment, but yes an actual fire ring should do the trick.
  156. T

    Husqvarna YTH24V48 sloppy steering

    Yes, the little plastic bushing is replaced with that style.
  157. T

    LA125 Overhaul

    It would be interesting to hear your take on this. What would you use? Bear in mind that this is a grafoil head gasket. I saw someone somewhere was making them out of copper? Is this a better idea ?
  158. T

    LA125 Overhaul

    220" #s
  159. T

    LA125 Overhaul

    They really should have a fire ring style gasket on these. They have increased the torque to 250 inch pounds and updated the torque sequence a while back. You shouldn't use a dressing of any kind. Clean up is king. I do them all the time and it takes me an hour and a half.
  160. T

    Cub Cadet Z-Force 48 main drive belt trouble

    I would be a less busy man if it weren't for CUB deck belt problems. Let's start with the actual model number off the product tag, what belt # it called for and was put on. By the length you must be talking about the primary belt. You certainly want to take the tension off the secondary and...
  161. T

    GT 262 Losing Power fuel?

    A great way to determine if you have a feed problem is to run a line to a donor fuel can and see if the problem persists. It sounds like you have replaced all of the fuel line? You also have a pick up in the fuel tank which can be plugging or cracking for that matter. Thin rubber could be old...
  162. T

    Cub Cadet XT1 stumbling/sputtering

    Some EFI models had issues with the connector snapping in fully at the ECU. My normal on these first is to check the pins in the connector to know that they are secure, clean and snap into place at every connector.
  163. T

    Cub Cadet XT1 stumbling/sputtering

    On these the first thing I check on these is fuel flow out of the tank and look for debris that could plug the outlet. Strange, but I clean a few of these tanks a season. Also the roll over valve on top of the tank doesn't always vent and if a non fuel pump model, they can't always deal with a...
  164. T

    Who want to chat about plasma cutters?

    The drag tips are nice. I have a Hypertherm and it has worked well. I did get their dryer for the inlet air. The big thing is that you will need air and lots of it, so check the spec of what you are considering getting. They do have small units as well with an onboard compressor.
  165. T

    ID model of Tecumseh without shroud

    Unless there is a shorty tag on the breather bolt then no. You could post a pic, pull the head and measure bore and stroke. Tecumseh made both a small frame HS series, an H series and and HH series in the older days.
  166. T

    Looking for Experiences/Thoughts/Opinions on JD X380 and similar X series tractors

    The X series is a tough tractor to beat. It's a lot more solid for sure than the Husqvarna anything. The steering will stay performing well for the life of the tractor and the Accel deck holds a lot less grass underneath than the Husqvarna as well. It seems like all I do lately is repair...
  167. T

    Yellow or Dijon?

    My resident chef has been making suggestions on how to sex up the yellow mustard she makes for me. I'm really getting into it. Spicyish and flavorful.
  168. T

    John Deere Freedom 42 adjustments

    I take you used the primary belt from the Freedom? The link from the tractor is adjustable as well.
  169. T

    Kubota grease vs Briggs and Stratton grease

    Does it say lithium on the tube? I think it is or at least was. Moly /graphite was the last I've seen. If your Kubota was lithium grease at least it shouldn't turn to mud. As far as I know you don't mix lithium based w/ polyurea.
  170. T

    Riding mower RIO (Ridiculous Idea On the Onset)

    Glad you are good with it. I can see though that having to push it each time when you back up can be distracting for some is all.
  171. T

    Riding mower RIO (Ridiculous Idea On the Onset)

    SO while your eyes are seeking the bright yellow button, how are you supposed to look where you are backing?
  172. T

    Riding mower RIO (Ridiculous Idea On the Onset)

    Several other manufactures have had much better systems than Deere. I agree with the OP , instead of concentrating on what you should be, you are seeking a switch to pull or button to press. Husqvarna you turned the key back one notch on the switch. Early Toro had their key choice which had an...
  173. T

    Surging on an LA175

    A couple of things regarding surging on these. It could be internal in the carb if you hadn't replaced a couple of the key seals. The moth gasket, lower o-ring and seals on the mains all need to be good. The flat domino one too, but there are less issues. You can buy them separately rather than...
  174. T

    JD LT133

    So when you did the donor can, everything was normal?
  175. T

    Kohler 7000 series

    Every once in a while I find one that the cable adjustment won't quite correct. A couple of things that might help is selecting a different hole where the cable hooks in, lube the control so that it works freely and if you can tweak the arm on the control a tad to make the choke close better may...
  176. T

    JD LT133

    Welcome to TBN
  177. T

    JD LT133

    For a test, drop a piece of fuel line into a gas can and hook to the pump and see how it runs with the donor can. If your lines are getting spongy or plugging, the pick up tube in the tank cracked or plugging or the vent in the fuel cap is plugged- it should run up good.
  178. T

    LA125 Overhaul

    You're a saint getting that all fixed up for her. Great time to clean the fuel tank and replace the fuel line too.
  179. T

    ZTM Flex Forks

    Interesting. I watched their video. I could see where it could have some shock absorbing qualities. They show it flex, the deck dip down in the front and it somehow improves QOC. I'm a bit skeptical. Show your seat set up or at least what you bought. That seems like a good way to go.
  180. T

    300 lawn runs 20 mins then backfires and dies

    You should have battery voltage at that terminal of the regulator to start with, so I would guess that's your issue. Yes, once you are running, higher voltage in that range.
  181. T

    Crab Quenelles for dinner

    Wow. Just wow. Brunch? Dinner? You have my taste buds a workin'.
  182. T

    E-15 fuel in your area?

    I haven't seen it around me. It seems to be a resoundingly bad idea. Our Kohler engine distributor reiterated that it was not suitable in OPE. E15 The U.S. Environmental Protection Agency (EPA) defines E15 as gasoline blended with 10.5% to 15% ethanol. In 2011, EPA approved E15 for use in...
  183. T

    Cub Cadet SZ60 Oil filter loosens itself

    No Kidding. Some of those ZTRs are a real pain!
  184. T

    Approximate price to replace Belts on X350

    Deere list on the 3 belts are about $150- 160, which is both deck belts and either the transmission belt or the Powerflo belt. So what ever you mean there. The two idler pulleys on the deck about $90 for the pair. The stack pulley in the back is about $90 if that's included. The idlers for the...
  185. T

    Cub Cadet SZ60 Oil filter loosens itself

    Since it is repetitive, put a paint mark reference on the filter / block. That way you can keep an eye on it and also possibly see if rather than loosening that the seal is becoming brittle / shrinking from the heat.
  186. T

    Mayo on corn on the cob

    I know what you mean, some grilled corn seems mighty tasty right about now. I think it will be at least a few months before I get my corn on the cob.
  187. T

    Throttle assembly AM106135, inner piece only?

    Just at the hardware store. It may be called music wire maybe instead of piano wire.
  188. T

    John Deere LT166 starting

    Has this machine been run in the last 5 years?
  189. T

    Throttle assembly AM106135, inner piece only?

    Not this assembly. I've done a few over the years using piano wire from the hardware. I think the tough part is getting behind the lever to bend the last of the tank. You could likely pull the lever away from the body for clearance. All it takes is a right angle bend through the hoe and bend...
  190. T

    Yellow or Dijon?

    My wife's been making our Dijon for years. Good enough I guess, but I never really got into it. Asked her if she could make some yellow. Apparently there is a step that lets it get a bit spicy that she did. She said, if it isn't good I'll remake it. Spicyish yellow mustard now for me.
  191. T

    Yellow or Dijon?

    Informal poll. What's your go to mustard?
  192. T

    Tuff Torq K46 - rebuild or just drain/refill oil?

    Let us know how you come out. Fingers crossed.
  193. T

    Husqvarna riding mower hard or mesh bagger bins?

    Mesh bags also allow for an easier air flow. Baggers tend to have a mesh baffle up top, but it still makes a difference.
  194. T

    JD X300 mower deck belt

    Before you go further, Deere has a fix for this that works. Ask about 42C deck belt failure Solution 116525. This assumes that you have the deck w/ belt # M154621 which is slightly more that 146". I've not seen a 141" deck belt.
Top