Recent content by Leejohn

Blackice no one has gave you anything try or do. I well try, It seems like the control valve on the hoe GPM doesn't match good with skidsteer. I looked the skidsteer and gpm is 15.8 and if the hoe control valve is "lets say" a 25 or 30 gpm then it well be real sensitive. Try and find gpm are...

Are your fwd and rev foot controls even and does it want to creep any? Could be you are not getting full travel and that is adjustable. I just rebuilt a engine on one and there's would creep a little. They said just not to fix, so I can't tell you how to fix for sure. There should not be any...

One thing no one has said anything about is the feed back control. Some have a spring on the shaft and the control to the rock shaft can move, but if rusted or real dry can chitter on the rod. That well make the 3pt jump up and down as you go up, just grease or oil it. Like redman said if you...

Make sure your 3pt is not all the way up.

My guess that hole is to just let you know you have a leak in the steering control box.

What I did was I put a tee in my rear remotes. Ran the lines to a pair Q C at where the loader Q C are, after making a bracket to hold them. That way I can take the loader off, just have 6 QC there now. Then went on up front to QC. Can only use one at a time, If I have my weight box on I use a...

Here you go. https://kubotabooks.com/homepage/

I would not waste my time trying to get that valve fixed. It doesn't have load checks and it is two lever. Get a joy stick valve, you well like it a lot better if you match the valve GPM with the tractor.

You might check in the loader valve the load check, also check the can on the end of that spool.

Kind of looks like FM npt to go on it.

I think the turbo is oiled by the engine oil, at least the ones I seen. But keep in mine I have a marine back ground. The engine well ran away if crankcase is way over filled. It well start suck oil out the crankcase and as it speeds up and before it blows apart there is only one way to stop it...

Never heard what the dealer is saying before. Did he check the hyd pump? If not be careful, check oil after a few short time running. It could run away on you, sounded like it almost did.

I would say no. Need more info (year and model).

See if they checked the priority valve.

I have used Fenner Fluid Power on 3 trailers, all were double acting never had that happen. One was used on a trailer I made for 32' pontoon house boat for Woodward Governor. I Know a guy that worked there before they sold to SPX. If it comes down to it I can try and get his number, if he still...