New Kubota Loader Uneven

[ScottyP]

Brand new MX6000 with LA1065A Loader. Bucket came off on left side, seems the hydraulic on one side is not set the same as the other? Is there a fix for this? Need to get the bucket back on. Thanks

 

[Gator6x4]

New Tractor. I would have the dealer on the phone.

 

[TractorTech]

Welcome to TBN.
Agree with Gator6x4. The crosstube has twisted/bent on the coupler. Thst shpuld not hsppen....unless, you caught the rh edge under something solid and rolled it back. Just speculating.

 

[sea2summit]

You can see the damage on the passenger side mount. Looks like someone lifted without having a good lockup and the driver side popped out. Was it delivered with a bucket or something mounted? Did it take a lot of force to release?

 

[ScottyP]

You can see the damage on the passenger side mount. Looks like someone lifted without having a good lockup and the driver side popped out. Was it delivered with a bucket or something mounted? Did it take a lot of force to release?

Is it fixable?

 

[TractorTech]

Probably, but may be better to replace it.

 

[ScottyP]

You can see the damage on the passenger side mount. Looks like someone lifted without having a good lockup and the driver side popped out. Was it delivered with a bucket or something mounted? Did it take a lot of force to release?

Exactly the driver side had popped out and I did not realize it.

 

[ScottyP]

Probably, but may be better to replace it.

Can just that from cross tube section be replaced?

 

[Jchonline]

Is it fixable?

The SSQA mount is bent to hell...looks like they ran it over in the parking lot lol. I would require a new one. They can bend this one back until they get a replacement in so you can use the FEL.

 

[4570Man]

New Tractor. I would have the dealer on the phone.

He said in the post the bucket came off on one side. That’s actually more common than it seems and it’s not a warranty issue.