lostcreekranch
Super Member
- Joined
- Dec 14, 2012
- Messages
- 7,948
- Location
- Austin County, Texas
- Tractor
- NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4155HC w/FEL, WR Long 3rd Function.
Good morning. It was 71° this morning and our high will be about 91°.
I got almost 4 hours of Kubota ZT seat time, yesterday morning, and the tire repair held. The air pressure was still @ 20 psi.
I mowed around the house and then around a bunch of trees in the morning. After lunch, I got on the 55 HP tractor with the rear finish mower and got another 4+ hours seat time in the yard. Today .. I plan some more low branch tree trimming, to be able to mow more with the tractor / RFM.
Roy .. every couple of years, I remove my PTO shafts, take off all the guards, and spray everything with Simple Green Pro degreaser. Then pressure wash everything and set all in the hot sun to dry. When I start reassembly I give the sliding parts of the shaft a good coat of fluid film, put everything together, then grease the u-joint fittings and the ones on the guards.
RNG .. good work on your tank. I've had several occasions where a long cheater bar didn't work but .. a pneumatic impact did. Rust seems to give in to the bang bang of the impacts.
Don .. your Apple Watch makes my Fitbit Charge 3 seem like a toy. You mentioned yesterday, heart rate of 5 BPM??
Happy birthday to Ken and a Randy today.
Drew .. stay safe.
Hope everyone has a great day.
Prayers to all.
I got almost 4 hours of Kubota ZT seat time, yesterday morning, and the tire repair held. The air pressure was still @ 20 psi.
I mowed around the house and then around a bunch of trees in the morning. After lunch, I got on the 55 HP tractor with the rear finish mower and got another 4+ hours seat time in the yard. Today .. I plan some more low branch tree trimming, to be able to mow more with the tractor / RFM.
Roy .. every couple of years, I remove my PTO shafts, take off all the guards, and spray everything with Simple Green Pro degreaser. Then pressure wash everything and set all in the hot sun to dry. When I start reassembly I give the sliding parts of the shaft a good coat of fluid film, put everything together, then grease the u-joint fittings and the ones on the guards.
RNG .. good work on your tank. I've had several occasions where a long cheater bar didn't work but .. a pneumatic impact did. Rust seems to give in to the bang bang of the impacts.
Don .. your Apple Watch makes my Fitbit Charge 3 seem like a toy. You mentioned yesterday, heart rate of 5 BPM??
Happy birthday to Ken and a Randy today.
Drew .. stay safe.
Hope everyone has a great day.
Prayers to all.