Everything Attachments

[EverythingAttachments]

I do not know how much of our privacy rights we give up being members on TBN, but I have read tons about how much of our privacy is given up on baselessbook

I don't research or pay much attention to it, but I suspect more is unknown than known when it comes to the subject of privacy, facebook/online or otherwise.
Travis

 

[lilranch2001]

Funny, I have not been on TBN much in the last year, traveling to much for work, until recently I retired and started back up.

Curiously I was going through todays posts and ran across this.......
https://www.tractorbynet.com/forums/related-topics/407660-creepy-re-online-privacy.html#post5326047

 

[fried1765]

I spend at least a couple hours a day reading on TBN. Afraid I would never get off the couch if addicted to Facebook too.

Facebook is the 21st century version of writing on the S**T house wall.

 

[ch1ch2]

Facebook is the 21st century version of writing on the S**T house wall.

Never heard it put like that.
I think that is is pretty accurate.

 

[goeduck]

Facebook is the 21st century version of writing on the S**T house wall.

I am not a Facebook person and after reading that, I never will be :confused2:

 

[EverythingAttachments]

Funny, I have not been on TBN much in the last year, traveling to much for work, until recently I retired and started back up.

Curiously I was going through todays posts and ran across this.......
https://www.tractorbynet.com/forums/related-topics/407660-creepy-re-online-privacy.html#post5326047

I hadn't read the thread either. After skimming the first few comments, it's along the lines of what I was thinking, but I don't think the eyes and ears are nearly isolated to facebook.
Travis

 

[ch1ch2]

I hadn't read the thread either. After skimming the first few comments, it's along the lines of what I was thinking, but I don't think the eyes and ears are nearly isolated to facebook.
Travis

While that IS true.
You have to start somewhere.
Can't just make an excuse and accept it.

 

[greggyy]

I hadn't read the thread either. After skimming the first few comments, it's along the lines of what I was thinking, but I don't think the eyes and ears are nearly isolated to facebook.
Travis

Do you have listening devices and cameras and GPS on your attachments ? You spyin on us ?

 

[EverythingAttachments]

Hope everyone is well here in TBN land. This is our second week in the new factory and I'm now steps away from the welders, lasers and all kinds of cool activity. I look forward to giving everyone a closer look at our operation. I hope you enjoy!
Travis

Getting settled in the new office.

Merica for some window shade!

Mighty press brakes!

Bystronic Fiber Laser was zipping through some Harox wear plate AR450 steel for Wicked 60 grapples this morning! The amount of steel this laser cut in 2.5 hours this morning would take our older laser all day.

3/8" thick was cut at 183" per minute!

 

[aczlan]

The amount of steel this laser cut in 2.5 hours this morning would take our older laser all day.

So, your bottleneck will move from getting pieces cut out, to getting pieces stuck together and painted?
That's a good problem to have.

Aaron Z

 

[goeduck]

Impressive equipment for sure!

 

[EverythingAttachments]

So, your bottleneck will move from getting pieces cut out, to getting pieces stuck together and painted?
That's a good problem to have.

Aaron Z

More welding stations and a MUCH larger paint booth, too, so the plan is to have no bottlenecks pretty soon!!
Travis

 

[Semper Paratus]

Was hoping to see a picture of my recently ordered subsoiler being built.. :thumbsup:

 

[EverythingAttachments]

Impressive equipment for sure!

Thanks, goeduck!
I'll try to share early and often.


I took a walk through the factory yesterday evening. Here is how a few of the welders left their stations. This place is truly a daily art show in my opinion!
Travis

72" Xtreme Brush Cutter is in the process of being tacked. After this, it will go to another table and all of the joints will be solid, continuously welded.

Xtreme 30-70 Box Blade Check out all of the bracing in between the moldboards. Also, notice the horseshoe plates underneath the tube and the plates welded to the leading edge!

Next station gives a different view of one.

Mega Compact Wicked Grapple lids.

 

[Doofy]

Absolutely Beautiful work. I think you need to build a backhoe Ripper Tooth for the compact tractor market though.

 

[FTG-05]

Thanks, goeduck!
I'll try to share early and often.


I took a walk through the factory yesterday evening. Here is how a few of the welders left their stations. This place is truly a daily art show in my opinion!
Travis

72" Xtreme Brush Cutter is in the process of being tacked. After this, it will go to another table and all of the joints will be solid, continuously welded.

View attachment 598921

Xtreme 30-70 Box Blade Check out all of the bracing in between the moldboards. Also, notice the horseshoe plates underneath the tube and the plates welded to the leading edge!

View attachment 598922

Next station gives a different view of one.

View attachment 598923

Mega Compact Wicked Grapple lids.

View attachment 598926

View attachment 598925

Who is Micked? One of the Welders?

 

[lilranch2001]

WICKED upside down

 

[Code54]

Absolutely Beautiful work. I think you need to build a backhoe Ripper Tooth for the compact tractor market though.

Mini Ex attachments (rippers, buckets, etc) also would be nice

 

[Doofy]

Mini Ex attachments (rippers, buckets, etc) also would be nice

Please! hint, hint. Bro-Tec was making a Ripper Tooth and Trencher at a reasonable price with good shipping. Because of a death in the company, they may or may not continue production.

 

[FTG-05]

WICKED upside down

We got one!!!!