DK50se Loader quick connect fittings

[kspring61]

If your talking about the couplers for the factory loader, they are 3/8”not 1/2”

Part # 31 is the male end

https://partstream.arinet.com/Mobil...yJe2KyHS_XeN0XoIpCbZhcF5wJ3eZQARld2OimA1.html

So the QD's for the FEL are different sizes than the rear remote? I thought the rear remote was 1/2"
Thanks for the info, I can order these and take them down with me next time I head down.

Oh, that link didn't work, looks like a mobile only link. I tried finding that hydraulic box in the parts under hydraulics but couldn't find it.
OK , take that back, I found them as part of the FEL, shows both male and female connectors there.

 

[countrybumpkin]

Yes the loader quick connects are smaller.

Sorry the link didn’t work, yes I guess it was a mobile link, I was on a iPad.

 

[kspring61]

No problem
I got the couplers already but here is my next complaint

I ordered new dust caps since the stock ones got torn off, the caps are listed right with the 7241-1 couplers. So I pick the following one and get 4 of them for the female couplers (ones that go on the tractor end of the FEL connection), 6-6-CAP | 3/8" ISO-A CAP For Female Coupler: DiscountHydraulicHose.com

When I get them, they are caps for the 3/8" male connector. What gives? am I reading this wrong?
I don't see any other dust caps to order for the female connector.

 

[countrybumpkin]

The description is not correct, it’s says cap in the part number, but at the end of the description it says “ For female coupler” which would be a plug. The one after that one says plug in the part number but then it says “ for male nipple” which should be a cap. I would call them Monday and let them know about it, they will get you the correct ones.

This should be the correct number.

6-6-PLUG | 3/8" ISO-A Plug For Male Nipple: DiscountHydraulicHose.com

 

[kspring61]

The description is not correct, it’s says cap in the part number, but at the end of the description it says “ For female coupler” which would be a plug. The one after that one says plug in the part number but then it says “ for male nipple” which should be a cap. I would call them Monday and let them know about it, they will get you the correct ones.

This should be the correct number.

6-6-PLUG | 3/8" ISO-A Plug For Male Nipple: DiscountHydraulicHose.com

Update: I called DH and they are sending out the right covers, actually plugs. They agreed, website has wrong description.