My NX6010

   / My NX6010 #771  
3) We all drive around in vehicles traveling over 60 mph routinely and those vehicles depend on many parts that cost way less than $9 to stay under control. I think the $9 part argument is bogus.

I have yet to have a part replaced on any of my cars that cost less than $9, excepting replaceable items like lightbulbs.
 
   / My NX6010 #772  
I have yet to have a part replaced on any of my cars that cost less than $9, excepting replaceable items like lightbulbs.

How much does it cost to replace the lug nuts that hold wheels on?
 
   / My NX6010 #774  
   / My NX6010 #775  
Never having used a check valve equipped cylinder, I am still a bit baffled as to why they have become so trendy here. I understand Vince's problem with his tilt cylinder but not why a cylinder rebuild wouldn't have worked as well.
Nothing on my machine should have needed a rebuild to help the leak down. Everything was new at the time.
The remote valves were new and the tilt cylinder was new. What's to rebuild that would have helped ??
Was it the brand new cylinder leaking by or the brand new remotes valves ?
Don't know, don't care because the check valves solved the problem years ago.
 
Last edited:
   / My NX6010 #776  
Nothing on my machine should have needed a rebuild to help the leak down. Everything was new at the time. The remote valves were new and the tilt cylinder was new. What's to rebuild that would have helped ?? Was it the brand new cylinder leaking by or the brand new remotes valves ? Don't know, don't care because the check valves solved the problem years ago.

Aren't you describing a warranty issue if you had significant leak down when the tractor and side link cylinder were new?

Again, I see how the check valve solved your particular problem in lieu of warranty replacement but I don't see how one generalizes that unique experience to a general rule that "all topping lifts and side links should have check valves".
 
   / My NX6010 #777  
Aren't you describing a warranty issue if you had significant leak down when the tractor and side link cylinder were new?

Again, I see how the check valve solved your particular problem in lieu of warranty replacement but I don't see how one generalizes that unique experience to a general rule that "all topping lifts and side links should have check valves".

I think you mean top link.
 
   / My NX6010 #778  
Aren't you describing a warranty issue if you had significant leak down when the tractor and side link cylinder were new?

Again, I see how the check valve solved your particular problem in lieu of warranty replacement but I don't see how one generalizes that unique experience to a general rule that "all topping lifts and side links should have check valves".

I think you mean top link.
 
   / My NX6010
  • Thread Starter
#780  
Lifting the rear wheel off with the loader.

image-317683473.jpg
 

Tractor & Equipment Auctions

1989 Freightliner FLD120 (NEW CAT 3406A, NEW REAR ENDS, CLUTCH) (A50397)
1989 Freightliner...
2018 INTERNATIONAL 4300 26FT BOX TRUCK (A51222)
2018 INTERNATIONAL...
John Deere 1110 Field Cultivator - Heavy-Duty Soil Finisher for Precision Tillage (A51039)
John Deere 1110...
Unused 2025 CFG QK18R Mini Excavator (A49461)
Unused 2025 CFG...
2014 FREIGHTLINER CASCADIA (A50854)
2014 FREIGHTLINER...
OIL WORKS INC. AIR TONGS (A50854)
OIL WORKS INC. AIR...
 
Top