Kubota B3200 Remote Hydraulics Kit

[MtnViewRanch]

Is the set that is supplied by a 3rd party to Kubota for your tractor integrated into the tractor? No, it hangs off of the ROPS doesn't it? Yes you would have been better off to do the whole thing yourself. In your case, yes a person can be better off money wise doing the whole setup themselves rather than using the "Kubota kit" .

Go to the Grand L or the M series tractors and this is not the case. And I still think that unless the dealer did aftermarket sets all the time, it is still going to take more time, just because they would have to work with the unknown just as you would. They have to track everything down, measure for this, that and the other thing. It all takes time. no one wants to work for nothing.

 

[Leejohn]

Post a picture of the set up.

 

[cajunmanham]

I can only speak for the "B" series. I would think it should be integrated not hanging off the ROPS. In time I will hopefully do away with the 3/8" steel bracket that attaches to the ROPS and come up with somthing less obtrusive.

Shouldn't take long to measure for a total of 5 hoses for the dealer. Again it's all about the money, it's their time or my time. Good thing for me my time requires a lot less money.

 

[MtnViewRanch]

I can only speak for the "B" series. I would think it should be integrated not hanging off the ROPS. In time I will hopefully do away with the 3/8" steel bracket that attaches to the ROPS and come up with somthing less obtrusive.

Shouldn't take long to measure for a total of 5 hoses for the dealer. Again it's all about the money, it's their time or my time. Good thing for me my time requires a lot less money.

Yes sir, and that's how a person saves some $$$. :thumbsup:

 

[cajunmanham]

Here are some pics of the final setup.

 

[Leejohn]

Is the loader valve down there where all the hoses are going to or is it hooked to the loader subframe? If it is hooked to the sub frame I'll show you some picture how I have mine. Maybe you can get ideals from it. Just maybe you might do it something like mine even if the loader valve is down under there.

 

[Leejohn]

I had forgot about the picture in your 1st post and I see the valve isn't hooked to the sub frame. I'll post some pictures tonight and maybe you can get some ideals anyway.

 

[Ghive]

Hi guys & gals:
Well I got my Kubota kit from a guy in Canada for a little over $ 300.00. With JJ's advice it took me 3 days & $ 100.00 in extra tools I bought. Anymore it takes me time to figure things out & do something, getting old is no fun. I still can not get it to raise my single hose sickle bar. Gave up on it for now, just chained the sickle bar & cut my creek banks. JJ, THANK YOU for your help. LOve my B3200 though.

 

[J_J]

If the cyl on the sickle is a SA cyl, connect the hose to the B port and plug the A port.

You should be able to extend the cyl.

 

[bandaidmd]

Here's how I did my b series