3-Point Hitch Yanmar RS1404 tiller

[calpeg]

I have a yanmar rs1404 tiller and need to use it on my jd 2305 compact tractor. Can not seem to get it hooked up properly to the three pt hitch. Ideas?

 

[winston1]

Here are some fine pictures of an RS1404. Don't know whether anything here will help you or not. For what it is worth I made a shorter top link to use with my ym2002d and rs1300 tiller. * outright sales! Yanmar 1.4m side rotary substitute : Real Yahoo auction salling

Not to hot of a picture but here is my homemade top link. My tiller looks awful similiar to the rs1404.

 

[calpeg]

Here are some fine pictures of an RS1404. Don't know whether anything here will help you or not. For what it is worth I made a shorter top link to use with my ym2002d and rs1300 tiller. * outright sales! Yanmar 1.4m side rotary substitute : Real Yahoo auction salling

Not to hot of a picture but here is my homemade top link. My tiller looks awful similiar to the rs1404.

Thanks Winston! Yep, just need to do a modification or two and all will be fine.

 

[Mickey_Fx]

These tractors and tillers were not made to US stds for the 3pt. I have and use a quick mount hitch with spacing to US std and I had to modify all 3 points on the tiller. Had to widen the spacing on the 2 lower points and raise the spacing on the upper point.

I find the link Winston posted interesting due to a tiller tine issue I had recently. My tines were blue like in this link and the tine profile looks exactly like those in the pictures. Had been lead to believe I had a unique tiller.

 

[careyo63]

Typical. When I bought my RS1400. to use on my YM2000 Fredricks apparently didn't have the correct Dr. Shaft for it.The one they gave me wasn't even close!! I had to cut it up and shorteneded it.8-10 inches 2 Wks. to get the correct one to me. I was tired of waiting on it Esp. since that is the Tiller for a YM2000 and I am only 11/2Hr.drive away.