front weight bracket

[chris28]

ok, i know i have posted this before but i need a picture of the front weight bracket for the kubota bx2200 and a price

 

[tomnky]

I don't have a picture of the bracket, but, I can tell You It is $95.00 plus the bolt kit, Which was priced to me at $6.00 per ($6.00 X 5)weight. The weights were priced at $60.00 each (5 Total)

 

[Czbilly]

I had contemplated buying the weight bracket and weights for my BX 1850. I found some (45# each) generic small suitcase weights at a mower shop. I don't know what they came off of but they have the straight slot in them just like the larger farm tractor weights. I just slid them over the front part of the frame. I have three and could fit another on there quite easily. I believe these are the same weights that JD sells for thier mowers. In my case I paid $50 for 125# of weights and didn't need a special bracket.

 

[tomnky]

I ordered a bracket and bolt kit Myself this morning and should have them in a couple of weeks, I can take some pictures then, If You are still wanting to see one.

 

[chris28]

I ordered a bracket and bolt kit Myself this morning and should have them in a couple of weeks, I can take some pictures then, If You are still wanting to see one.

thanks sorry been busy whyere did you orderthe bracket at

 

[tomnky]

I ordered it from Steve Barlow in Somerset,Ky.

 

[tomnky]

See If this doesn't answer the question.

 

[chris28]

See If this doesn't answer the question.

hey could you get me the dimensons i could probally make one myself

 

[tomnky]

Give me some time , I have all that information and will try to post it.

I thought about that route as well but with the cost of steel and painting , I found it just as cheap to just buy one outright.

 

[tomnky]

Here is a link to an old post by RiverV that has a picture:http://www.tractorbynet.com/forums/kubota-owning-operating/56179-used-suitcase-weights-bx2200.html

 

[tomnky]

here is a series of pics from RiverV:

 

[chris28]

thanks for the pictures im sure i can make it im going to go draw it now

 

[sixdogs]

Very handy to have. I made mine without this knowledge but adapted construction so I can use the Ford skidsteer weights I already have. Will also use kbota weights if I ever find any used.
Front weights can be very handy.

 

[tomnky]

Chris, Post some pics of the finished product, Please.