The tractor has about 375 hours on it and never had a problem till this. It will throttle up, so I don't think it's the cable, but won't idle down past about 2000 rpm. No regen icon flashing...

Hey I have a 7 year old Kubota L3301 tractor that we had a mobile mechanic come out to replace the clutch. Long story short, they have now billed my credit card for $10k and the tractor is still...

3 cool tractor mods/fixes, I came across in my travels. For the L3301 but are fairly universal so may fit your Kubota. The one replacing the tiny little 3 point triangle handle nut is a great...

I am looking to get a hydraulic top and tilt setup for my Kubota L3301. I mainly want it for adjusting my rear scraper blade when maintaining my gravel driveway. Getting...

While working the other week I had my Kubota L3301 died while running. When trying to restart it turned over but would not fire. After letting it sit for a few mins it would restart and have the...

I just acquired a Kubota L3301 Gear Drive Transmission., 3rd Function valve with grapple, with R1 tires. I want to know what issues I should look out for, and what implements I should add and...

I live in Ohio but have wooded acreage in Mid Michigan so only get limited time to play with my tractor. I also have a Ford 8n and feel a little bad the ole girl as she won’t be getting as much...

Had the kids wax the l3301 and get it ready for sale. Kinda having doubts about selling it now.https://i.imgur.com/DlwpCaj.jpg

2020 kubota L3301 tie rod boot Replacement I just purchased a new 2020 L3301 in April, did my 50hr lube and noticed that one of my front inner boots was separated (see pic) Should I replace it...

Just ordered a 60" King Kutter Tiller Painted Kubota Orange for my Kubota L3301 HST Just ordered a 60" King Kutter Tiller Painted Kubota Orange for my Kubota L3301 HST I did not know that they...

Kubota L3301 HST Tiller = CountyLine Rotary Tiller, 6 ft Hi I have a Kubota L3301 HST and was going to pickup a CountyLine 72" Rotary Tiller. my L3301 has a PTO HP of 27.5 and on TCs website it...

I was taking advantage of labor day to to get some logs I had stacked up in the edge of the woods moved over to a spot I put some cross ties down to stack them on. These were 8ft or so oak logs...

I'M NEW TO ALL OF THIS, WOULD LIKE PROS AND CONS ON 3RD FUNCTION VAVLE FOR A 2016 KUBOTA L3301HST, WANT TO ADD A 3RD FUNCTION VAVLE FOR A GRAPLE FOR FRONT AND FOR REAR IMPLEMENTS. ANY INFO OR FEED...

Dealer says I should stay at 5 foot width but I壇 like to get more efficient cutting done if I can. Only mowing tall weeds, some grass, no saplings, smooth field with mild grade, 10 acres.

Guys I'm working my way through my 4 remote setup and can't seem to find the correct fittings that screw into the manifold block under the floor board. Are these pipe thread or British Pipe...

I want to add a Top & Tilt to my Kubota L3301 but this time I think I need check valves as when I did this to my L5030 (still have it and the problem) the side link bleeds down all the time...

This is to document the homegrown fabrication and installation of Rear remotes on my L3301. I'll be asking questions as I go for advice and I have to do a lot of this away from the tractor as I...

I've been looking at L3301 vs L3901. Dealer is giving me a ~$2500 difference between the models. As far as I can tell from specs and driving them both on the lot, the only difference at all...

Old member, new tractor- New Kubota L3301 HST Kubota LA525 with QA bucket Kubota 3rd function valve R4's loaded Sun canopy LP 1860 rotary cutter LP 60" grapple Delivered (55mi) $23,750 (did not...

Changed oil, change fuel filter, removed water seperator and cleaned. Blead fuel lines by running fuel pump with the bleed screw loosened, have done this probably 10 seperate times for long...

Hi all. Brand new here. Thanks in advance for any help you can provide. We're about to close on a Farmhouse in Huntington, Vermont with 5 acres on the side of a hill. We plan to operate a small...

I keep seeing on the net you can buy sway bars from some one named Houge or some thing simular but can not find a site where they are sold nor a price. Any one have that information. I have to...

Yesterday, I dropped my keys from the ignition on my 3301. They fell though a crack in the floorboard and landed on a ledge underneath the tractor. There, I also found this sizable bolt. I've...

Been a bit from my last post. To make a long story short, I picked up the L3301 from Barlow's on a PCS cross-country to Colorado Springs. Arrived and the tractor has been put to good use in...

Salutations Ladies & Gents! Just picked-up a new L3301 with an HST and came up with a scheme to get some floor space. Perhaps someone else has done this or a variation of it, but here goes...

Greetings folks....been lurking here for some time reading, learning & absorbing all things. After serious consideration, I pulled the trigger on a new machine.....it followed me home last...

Hello, I am a new Kubota L3301 owner with 5' Kodiak Medium Duty rotary cutter. It's been awesome first 6 hours. I understand the PTO startup procedure, but I am not 100% clear on the SHUTDOWN...

I just received a quote for a L3301 4x4 HST with R4s, LA525 loader and RCR 1260 for $23,900. I'm completely new to tractors and even I know that sounds high. I've been reading that 10-15% off MSRP...

Hello everyone. Just uploaded a video of my new L3301. I do a quick walk around in the video and talk about it some. It is parked next to my L3830 in the video. Let me know if you have any...

Hello, I have a L3301 with FEL and BH. It is HST. Tractor runs great... but the hydrostatic transmission seems very noisy (hydro pump whine). In an effort to quiet the HST whine I'm...

Is anyone running the L3301 or similar at 7500"? Any issues? I am thinking of buying one but my dealer (at 500') says I might not be happy with it smoking and running at altitude. Thanks

Been looking for a while and finally pulled the trigger on an L3301. I have a small hobby farm and a business dealing in old lumber so the L series is the perfect size for me. The bad news is we...

Someone asked for this but I can't seem to find my way back to that post. This is the factory number for the grab handle on the right side. The holes are there already.

Yet another yuppie who lives in the woods looking to buy his first tractor. My apologies if this sounds like a broken record around here. BTW, I did spend plenty of time with the Search function...

i really need a trailer to do several things. 1) Haul my new kubota L3301 FEL and an implement or two, to and from my home to my other property 4 hours away. 2) i need a general trailer to haul...

Is the 3 point hitch on a new L3301 a CAT 1 or CAT 2?

Tractor got delivered yesterday, 7 degrees out. Too cold to run it up the hill to the shop. Wifey was nice enough to let me park it in the garage. Traded in my much beloved 2003 L2600 DT ( with...

Hello everyone, Been reading here for a couple of months and decided to sign up since I am now the owner of a shiny new 2015 Kubota L3301 HST with a LA525 loader. With that we also got a Mohawk...

After much trial and error (more error) and a bunch of help from the fine members of TBN, I've nearly completed my grapple. It's not pretty, but its mostly functional. The only thing it lacks is...

I've been doing the Great Tractor Search for awhile now. Looked at used of all colors, and in the end I decided it was best to just go new and be done with it. Couldn't beat Kubota's financing...

Got another question guys. This may be obvious to some but I don't want to mess it up. I'm adding 3rd function to the front, I've got that all figured out. But that's using a valve with a power...

Hi Everyone. Finally became a member of your great commuity, looking forward to contributing what I can. I have a questions regarding the differences between the L3301 and L3800. The L3800hst...

Hey guys. I've been a little curious about increasing the pressure on my new L3301, seems like its a little weak, won't pick up the front end without "driving into it". Sometimes struggles to...

Hello all. I'm VERY new to the tractor world. My wife and I just bought 10 acres and decided to get a tractor to help out around the place. Bought a Kubota L3301 brand new with the DPF exhaust...

Hi all, deciding between a kubota 3301 and JD 3032, Best price I could find on the 3301 with hst and loader was 18,600, for the deere 17,500. Both include ~2k in cashback. I'm leaning toward the...

Delivered 2 weeks ago, just now getting around to posting here. Purchased with a 72" finish mower and 42" tiller. Canopy and fork arms to be delivered soon. Used the tiller and old rough cut...

Local Deere dealer had an expo going at the local fairgrounds & had a few Kubotas there as well, including a L3301. Couple trivial cosmetic changes compared to my L3200. 2 regen related buttons...