I have a 1995 ford 2120 with about 2800 hours. I bought it earlier this year and just changed the hydraulic oil and filter about 50 hours ago.
Problem I am having. The loader and rear lift quit...
Hey guys. I bought a Ford 2120 that I will be fixing up. Was wondering if you could confirm year for me. Serial number is UV21865. I believe it to be a 1988, but want to be sure I have it correct...
Good Morning,
I have had a steady leak of antifreeze that seems to find its way to the engine block plug and then drips form there. I am not sure what is wrong. Attached is a picture that I think...
Hey guys I have a 1989 Ford 2120 and I lost reverse it starts to roll backwards like a foot then stops and goes nowhere it travels fine forwards any idea where to start looking it’s my first...
I’m working on a 2120 HSS and the transmission dipstick has machine marks in it from contact with a shaft/gear.
The dipstick is not bent do I’m asking if this is an occasional issue or a sign of...
Hi everybody. I broke the right front wheel of my tractor. I need some parts, used or new. I need the cover and the bevel gear housing for that wheel. I thank you in advance for your help. If you...
Hi all, Im a little confused on the clutch operation of my tractor, it has a shuttle shift and a single clutch, it has a cable from the clutch pedal to the lube valve, I have the service repair...
My 2120 is a 1996 model. Suddenly it will stop moving. Motor continues to run. if I change the 10 amp fuse in the three fuse block on the left side of the firewall the tractor will start and move...
In trying to remove the front cover to check out what I think is a leak in the power steering control valve, I'm stymied by this switch. In all the years I've owned this tractor I've never used it...
Hi all, just bought a 1988 new Holland compact 2120 with loader, has the Asian 4 cyl engine, the Hydraulics don't work, it has 2 hydraulic pumps on the side of the engine, what do each of these...
Hi all, just bought a 1988 new Holland compact 2120 with loader, has the Asian 4 cyl engine, the Hydraulics don't work, it has 2 hydraulic pumps on the side of the engine, what do each of these...
Hi All, have a ford 2120, has the shuttle shift, loader - 3 point, the hydraulics seem to quit working on it,drives fine, then I will bleed the hydraulics and the lifts work fine, until I let it...
I picked up an SIMS cab for my 2120, does anyone have any pictures of the cab to tractor mounts? The cab didn't come with any mounts. It looks like the front mounts may attach to the tractor's...
Does anyone know if the braided rubber hoses on the New Holland 2120 (late model Ford 2120) are Metric or English?
It looks like the same braided rubber hose is used for fuel, radiator drain, and...
I have a ford 2120 that will not move in forward or reverse. The diode in the HSS system is bad, anybody know here you can by a replacement diode instead of the whole HSS unit the picture is the...
Sorry to come on as a new member and my first post is asking for help.
Have a 97 2120 that the brakes have left town on.
How hard a job is it?
Are any of the after market disc's worth using?
I...
Looks like my tie rod ends are officially whooped.
My tractor is a late 80's model. Not precisely sure.
The part numbers I am coming with are SBA334800631(LH) & 641(RH).
Just want to be sure...
Hello fellow tractor owners,
I need help locating an attaching kit for a 758B backhoe to a Ford 2120 tractor with a 7109 front loader. I have the 758B backhoe with the subframe but can't...
This post is actually about my neighbor's Ford 2120. He was out pushing a pile of brush and lost all control of steering. I went over and looked under the tractor and the steering cylinder was...
My rear PTO, (only PTO) will not disengage. I pull the lever back, it doesn't go all the way back and sounds funny. I have tried leaving the clutch in for maybe 20 seconds. I have tried going...
I have a Ford 2120. It came with a Ford 758 backhoe that is totally shot, too expensive to repair. I'm having a hard time finding other backhoe attachments that will fit and run on my tractor...
trying to determine if indeed my clutch disc is the problem. changed hydraulic filter and fluid. clutch slips in forward gears (engine revs, but no power). reverse seems unaffected which is why i...
trying to determine if indeed my clutch disc is the problem. changed hydraulic filter and fluid. clutch slips in forward gears (engine revs, but no power). reverse seems unaffected which is why i...
I have a Ford 2120 with 18.4 x 16.1 R3 turf tires that are well worn and one is leaking. From the research I have done it seems it will cost a fortune and be very difficult to find the proper...
been a long time lurker of the sight and usually find the answers I am looking for. I hope someone can help me and I am attaching a parts diagram. My problem now is the shaft (#7) the the 3pt lift...
Hello to you all from Worcestershire in the UK,
problem as follows:
make & model: Ford 2120 compact tractor (built 1995)
problem: low engine speed (rpm) when the hand throttle is set to idle...
Hello new here, but I fig it be better to just start another post on my 2120
heres what I have , ford 2120
I can start the 2120 put it in gear and will go maybe 50-100 yards then act like it...
I have a ford 2120 with the hss transmission. When placed in gear the tractor sits a while and then takes off.The same is true when stopping and shifting to reverse.The clutch pedal has an inch of...
May be looking into purchasing a 2120.
I have limited information at the moment.
The machine is at my in-laws.
I used it once a few years ago and seemed to run good.
The tractor is a couple...
My neighbor has a 2120 4wd and was moving logs with his front mounted pallet forks when the right front wheel fell off.
Not sure what failed first, bearing pieces were found on the ground.
I'm...
I have a Ford 2120 with a shuttle shift. Anyway I have the tractor apart and noticed the shift fork is a little worn. I was told that the fork wear migh be filled with brazing or welding. I can...
Hi,
I have a 1995 Ford 2120 with electronic shuttle shift transmission and 4 wheel drive. The tractor was serviced this summer because the PTO was locked up and damaged the PTO clutch and other...
Hi, Just purchased this neglected tractor and doing some maintenance I noticed the cable that attaches to clutch pedal, the mount is broken or missing.
Does anybody have a picture of theirs to...
Hi everyone,
New to tractors here and i got a Ford 2120 when we bought our new home here in Petoskey Michigan this summer.
Had it in to the dealership to change all fluids, filters and then...
Good evening everyone, my name is Simon and I thought id better say hi.
I am a small plant engineer based in Scotland's beautiful west coast. It's raining again!
I get asked to help with the...
Hi, this is my first post here so I apologize if my inexperience shows. I have my Dad's 1992 Ford 2120 which I've taken pride in always starting. However since an abortive start attempt on a 0...
Hello everyone, newbie here, great site with alot of info! I am looking at a 89 2120 with 1 remote, fel (7109) qa bucket, 1900 hrs, 4wd, loaded rears. Just serviced. Dealers asking 12000. I...
I found a Ford 2120 with a FEL for sale. Tractor is low hour and in good shape but does not have HSS. How big of a deal is that? I probably won't be loading materials with it much but I can see...
Hi, I have a 2120 4cyl and while pushing some snow I noticed an idiot light or dash light on. The light is a circle with a line threw it. The circle is a normal circle but the line is sort of wavy...
I bought this Ford 3rd hand and do not have manual for it. I blew a hydraulic line moving the snow around here in NJ and replaced. Now I want to fill up any that I lost. Problem is, I do not know...
This tractor has a significant hesitation when changing direction. It doesn't matter which range you are in. Since I have changed hydrolic oil and filter it is very slow to move and will only...
I just put a Herd 3 point sander on the reader for my Ford New Holland 2120 (model year 2000).
My paved driveway is *very* steep and winding, with the home (log cabin) at the high end.
I plowed...
I need to remove the frame mounted backhoe from my Ford 2120 to transport it (on a smaller trailer).
I haven't picked up any service manuals.
Does anyone have the directions handy, or perhaps even...
I have a trailer with an 18' bed and 7k axles.
Am I going to find a way to trailer a Ford 2120 with loader and backhoe on it?
Perhaps with it backed on and the back hoe hanging near the tongue of...
I just bought a 2000 Ford 2120 with backhoe.
When I used it Saturday some welds broke on the mounts. These appear to be the only connecting parts between the tractor and backhoe. Is there...
I just bought a 2000 Ford 2120 with backhoe.
When I used it Saturday some welds broke on the mounts. These appear to be the only connecting parts between the tractor and backhoe. Is there...
I have a 1994 2120 with EHSS 12x12 transmission that uses the one way bearing (sprag clutch) to drive the PTO. I am pretty sure my pto is loosing power and stopping due to this. I bought the...
Hello all,
Hopefully some one can help point me in the right direction.
I have a Ford 2120 HSS
Last year i was running it and the tranny started slipping(I was low on oil),,,I noticed below i...
I have a ford 2120 with HSS shuttle shift that will not shift from netural. Have check the shifting solenoids mounted at the steering column and they are getting voltage and seem to be working...
Hi,
I have just bought a Ford 2120 tractor that came complete with a Lewis equipment backhoe and FEL. The backhoe is a 300 series. Im not sure about the FEL. It seems to have been fitted to spec...
I have read many of the posts about chains on the front of 4wd tractors and it has me a little concerned about doing that, I understand it is probably no big deal if you are careful about how you...
I bought a 2120 and it has the turf tires and it is not easy to find used rims and ag tires so thinking about going to chains and a 7 foot snow bucket that weighs about 700 lbs. Is this too much...
Talked to a guy about a 1988 2120 4wd with FEL and a ballast boc with 2200 hours for about 12,000, is this a good buy it seems like the ford is much heavier than the other models in that HP range.
Hi, I am looking at buy a used 1992 ford 2120 with a loader and back hoe with 2500 hours on it. The seller claims everything is in good working order and is asking 12,900. I was looking for any...
Anyone have any idea what a 1989 Ford Model 2120 with 1051 hrs. is worth ?
The unit comes with a roll bar and a non descript snow blower.....over all the tractor seems to be in good shape with...
Hi,
I'm looking at acquiring a 1989 Ford 2120 with 3710 hrs on it and has a front end loader. I was hoping that some of the members here could steer me towards some good things to look for to...
My 2120 had been run out of fuel so I filled the tank, And now after bleeding the lines the tractor will only run for 5-10 seconds before stalling back out. It also spits some black smoke...
I'm looking at purchasing a Ford/New Holland 2120 off a private individual and am curious if there is anyway to find out what the repair/warranty history is.
Is this something you'd have to...
Looking for the A Counter Gear part number SBA 322372220 used in a 1988 Ford 2120 FWD gear box that mounts to the bottom of the transmission. Mine broke a tooth and took out both gears. I bought...
I am looking for some info on repairing or replacing the one way pto clutch on my ford 2120 it does not turn. i saw a post where someone said to ingage the pto and see if the pto turns counter...
Someone told me that there were higher than average failures on the Ford 2120's Can anyone substantiate this? I have been looking at a used 2120 and am leary of it now.
Looking @ a 88 ford 2120 TLB w/ 1050 hrs. appears to be in good shape but needs front axel seals, wondering if it a major job. Machine would fit my needs perfectly otherwise.
Thanks for any advice
Looking @ a 88 ford 2120 TLB w/ 1050 hrs. appears to be in good shape but needs front axel seals, wondering if it a major job. Machine would fit my needs perfectly otherwise.
Thanks for any advice
New old guy here.
I am going to buy one of the above.
The Ford:
2825 hours;FEL; Bush Hog and snow blade included for $10,000.
The TC33
625 hours; FEL no other equipment come with it...
Can this Ford 2120 take a 72" or 84" MMM? Tractor is pretty local to me. My idea is to make a dedicated MM mower out of it. I don't know if it has a mid-PTO...
I bought a '97 New Holland 2120 with 105 hours on it. I need to change the motor oil and the manual specifies a SF/CD approval. I want to use 10-30 due to temperature swings in PA.
Does...
Could someone tell me if a Ford 758B backhoe that is coming off a Ford 2120 would fit a 2110? What is the difference between the two tractors. This is a frame mounted unit.
Thank you.
I posted this under NH but so far have no answersI have found a Ford N/H 2120 with over 6,000 hrs. It appears to run smooth and quiet. It was a golf course tractor. The only problem tha I could...
I have a blown transmission and cracked casing in my Ford 2120. Has anyone tackled this job on their own before or am I better to send it out? Any suggestions on getting used parts?
Does anyone know if an older ford 2110 compact tractor front grill is the same shape (fit) as the newer 1987-2001 compact 2120. I know the older ones were white and mine is painted black but the...
Hello all, traded a good 4 wheeler for my lastest project!! really has not been that bad so far, anyways got the beast back together and added a set of rear remotes and also added the power beyond...