I have a 1980 Ford 1100 diesel 2wd compact tractor. I started it up the other day to move and left it to warm up. When I came back to it it was leaking engine oil from the front of motor down...

So I ordered a Nissan Micra 1.2L pressure plate off eBay. I took my old pressure plate and clamped to the new one. Center punched, drilled, and filed to match. The other mod was to the diaphragm...

These seem to be made of unobtainium. Sent my core to rebuilder only to be told it wasn't serviceable. I spoke with about every tractor and clutch company in the US. I found a Nissan unit for a...

I just bought a used Ford 1100. 3 days after buying it the 4x4 quite working. How can I trouble shoot it? What are some common things that could be wrong?

What is a 1980 Ford 1100 tractor with front loader worth

Hey all, I'm trying to restore an 82' model 1100. All the way down to the Ford Key. Does anyone have any that they would part with? So far, I've tried my local dealer and a few places on line...

Hi All, I'm servicing my recently purchased Ford 1100. I will use 10w-40 for the engine oil but I'm curious to know what would be best for both the transmission and front axle (4wd)? I was told...

Hey All, I recently picked up a little Ford 1100, which seems to be in really great shape considering the age. There are only a handful of things needing done that I can see to bring it back to...

I have an extensive graveled parking area plus drive. I've recently had the entire area re-graveled. There is one slope connecting the parking area and the drive. My contractors advised purchasing...

Good evening all, I'm in need of hydraulic parts for a 1982 Ford 1100 4x4 tractor. I've lost all hydraulic pressure. Replaced the engine mounted pump, but it was no help. Placed a pressure gauge...

Just looking to see if anyone has the I and T shop manual that covers these compact tractors. It is the FO-44 manual and I would really appreciate it if someone had it and could give me the torque...

Hello, My lady and I recently picked up a nicely cared for Ford 1100. 1983 model. 2 wheel drive. The engine is rated as 13 HP according to TractorData.com. We need a finishing mower and we're...

I have a 1982 Ford 1100 4x4 tractor with 1400 hours on it. It ran when parked years ago but has not been started in 5 years. I want to sell it and the back blade and mower deck. It appears...

Hello, I'm a newbie to this site and I would like to ask a question about a Ford 1200 Compact tractor (4WD). Does anyone know of an aftermarket tie rod end for the Ford 1200 4WD or of a...

Looking for a spindle and possibly the hub for a late 70's early 80's style ford 1100 2wd. Other compact models in the same range will fit. My spindle is very boogered up and I hate to spend...

My Ford 1100 has a problem that I have been unable to solve. It starts and runs only a couple of seconds with a lot of black smoke and dies. It repeats this every time I try to start it. The...

A neighbor has a Ford 1100 that hasn't been used in years. It has a FEL, bush hog, finish mower and snowblower. I'm interested in making a fair offer for it, but am concerned because it hasn't...

Hi all! I have a quick question about the hydraulics on my ford 1100. I just changed the hydraulic filter on this unit (being the original filter 36 years old, 600 hours) I figured it was time...

I need help replacing or repairing a rear rim, I can get the numbers on the side 16 x 5 JA but all the rims I find have a 6'' hub dia mine is 3.5. The rim is spidering with crack off each bolt...

Hello, I sure hope someone can help me this problem, it is driving me crazy and Im not wrapped to tight to begin with. I used my tractor on Monday it has a front end loader and I was moving...

Im recently having to replace the steering shaft on my Ford 1100. I wanted to replace the bushing up by where the steering wheel but Im unable to locate the bushing. I can find the seal but not...

Hello I'm new to the forum, I'm looking for an older compact tractor to use a few times a year for my food plots. Right now I'm looking to buy just the tractor, and maybe a backblade for my...

Hello, I decided to sign up based on the wealth of information on this site. I am looking for, and if cannot find, going to build a loader for the Ford 1100 I have recently acquired. I have the...

Recently I purchased a ford 1100 and bush hog for 400 bucks. I got it home changed the fluids and filters and have been usin it ever since. I noticed I have a leak around the axle on the right...

Hello All, Brand new to the blog world, so thanks in advance. Just bought a Ford 1100 4WD yesterday and wanting to mount a front end loader on it but basically this tractor has no frame under it...

Hello everyone, I am new to this forum and need help with a used ford 1100 that I bought. The front driveshaft is missing so I know that is a problem of course but the spindle coming out of the...

How efficient would a ford 1100 2wd be with a 4ft tiller, 4' scraper blade, and 4' bushhog? I'm thinking its too small but the guy that owns it trying to sell it to me swears it handles it...

I have owned a 1979 Ford 1100 4x4 for 10 years now. 708 hours on clock. 4 weeks ago the steering shaft broke again. I t had also broke 4 years ago and welded it back together then, it had been...

On a ford 1100 there is a steering rod on the left hand side that is attached to the steering arm at one end and the other end is attached to another part of the linkage directly under the fuel...

Will not crank up, was told the injector pump was the cause, have looked online for a new pump and cannot locate one or any info about it. Are these able to be repaired/rebuilt or can new pumps be...

looking for a front hub and front hub cap for a ford 1100 tractor .any suggestions....

I have a ford 100 1980 vintage with original rear turf tires size 8.00-16. Having some difficulty finding replacement tires, has anyone tried to install an appropriat size truck tire on these...

My Ford 1100's ignition switch starts tractor, works the cold aid start, but won't turn engine off. I have to pull the the throttle lever beyond the normal stop to stop engine. Any experience with...

I've been getting lots of 'good stuff' from the forums on lots of topics, but am finally admitting bafflement on the clutch on my Ford 1100. I am facing replacing the clutch assembly in my 1100...

Hello everyone have been looking for a small tractor for sometime and every time i would check google for some info this site would come up. i now have a ford 1100 i am hoping to get a front mount...

I just got a Ford 1100 2 cyl 11hp i believe and i was wondering what the possibilities were for a front mount snow blower. I'm front western PA and the snow here is typically heavy so it seams...

I have a 1980 Ford 1100 with 467 hours on it and it is in need of a water pump. Dealer has quoted me $330 CDN. (including taxes) (part # SBA145016201) Is this a reasonable amount for this part...

I am looking at getting a garden tractor that I can use mainly for snow removal. I was hoping to get advice from people with experience. I was looking at a Bolens 17 HP tractor with a plow and...

This forum is a real Godsend for me! I am looking forward to contributing. I have been spending a lot of time trying to find front rims for my Ford 1100. I have turf tires, and I am replacing...

Hi all, I am brand new here. I have a Ford 1100 4wd, and I have purchased boots for the steering tie rod ends, as the old ones had deterioted. Can anyone help me understand how the cap comes off...

Hi all, I am brand new here. I have a Ford 1100 4wd, and I have purchased boots for the steering tie rod ends, as the old ones had deterioted. Can anyone help me understand how the cap comes off...

I know overheating problems have been covered many times. I have searched and read several threads. My little ford will run about 20 minutes under load before it starts boiling over. I have...

I should have started here rather than the general page. Am looking at a79 model ford 1100 13 hp. It is in pretty good shape with 675 hours. Tires are original. Has wheel weights and front...

I am looking at a 1979 ford 13 HP with 679 hours. It runs well and the steering is tight. Has original tires and a three point hitch. Hydraulics seem strong . No obvious leaks. original owner...

Hi everyone, Wasn't sure to post here or in the Grey-market section so I'll toss it out ehre as well: I've recently came across a Ford 1100 tractor in excellent shape, except the engine which...

Hi everyone, I've recently came across a Ford 1100 tractor in excellent shape, except the engine :( which you might as well say needs to be overhauled (rings, pistons, bearings). I've searched...

I am trying to locate part # SBA326370190 pinion gear for the front drive axel on Ford 1100. the gear is no longer available from the dealer. Does any one know where I can locate a new or used one?

I was doing some rough cutting today. Real rough! When I realized the my rear hydralics only lifted an inch or so. I disconnected my side links and it seemed to work full length. I am thinking...

I inherited a 2wd Diesel 1100 series Ford tractor recently. I would like to make it the main tractor that I use and I am looking for some information about attachments. Is there or was there...

Does anyone out there have access to a part number for a 1980 Ford 1100 rear wheel rim? The tire on there now is currently marked size 8 by 16 but the rim has rusted so bad that I cannot see a...

Guys I need a little advice and this has always been a great place to get it. I have an oppurtunity to buy a 1980 Ford 1100. It has 189 hours on it and runs great. It was bought new by my neighbor...

Over the weekend I installed a pod of gauges which included an ampmeter. It was a no-brainer until I started looking at the various diagrams for automobile applications. Before I went into...

My little 1100 has an idiot lamp for temp problems. Never have been to fond of these. Many times it is to late by the time these activate. Does anybody know of a sender and gauge that would...

I have a chance to purchase a Ford 1100 w/ a woods 60" finish mower. Good condition, runs good, kept indoors. Is $2399.00 a good price for this. It is a 2-wheel drive with Ags. I know it is very...

I have a chance to purchase a Ford 1100 w/ a woods 60" finish mower. Good condition, runs good, kept indoors. Is $2399.00 a good price for this. It is a 2-wheel drive with Ags. I know it is...

I need a rear end housing for my 1200 Ford.If I can't find a salvaged tractor I will part this one out.

Im new to this tractor stuff! Found a early 80s 1100 4x4 with a FEL ,843hrs on the clock, good shape.Is this a good old tractor? Parts hard to find? They want $5800 Can. for it, is that fair...

I am new to this forum, but so far am enjoying the posts immensely. My question is this: My dad has a Ford 1100,which is a SMALL utility tractor, 2 cyl diesel (approx 15 hp) with 4wd, locking...