Hey guys, Thanks for all the past advice and help with my Farmpro 2425, but you know the journey never ends. See this thread about my purchase and adventure...

Hi, new to the forum, and dying to get some experts to weigh in on my problem. I picked up a non running Farm Pro 2425 a few weeks ago. I don't really have any experience with tractors or older...

Hey ya'll! My name is Travis. I am 19 yrs. old and Love tractors. My friend has a Farm PRO 2425 tractor. I put 7 hrs. on it today with a 6ft. box blade. I need answers to the following questions...

My 2425 is acting a bit strange; it starts great, but only runs abut 20 mins and then acts like it's run out of fuel and stops running; that's not the case the tank it 3/4 full; any ideas?

I am looking to buy my first tractor so please bare with me if ask any dumb questions. My needs are to maintain about 9 acres around my house. I am looking at units with a FEL, box blade, and...

Just picked up my first tractor a Farm Pro 2425. I want to thank everyone for some great information on this forum:thumbsup: Look forward to particiapting Here's my feeble attempt at removing...

i just recently noticed that going up any incline it seems the clutch is slipping (smells). does anyone know what step i should take next before it gets too bad. if i need to replace the clutch...

Hi guys, hope there's a simple solution to my problem.Just got the tractor and the pto works, but can not engage with engine running. It just grinds the gears. I sure don't want to damage...

Hey all new to this forum and to tractors as well. My wife and I bought our dream home in the country two years ago and ive got 53 acres to play around with and approx 2 1/2 acres around the...

I bought this Farm Pro from a friend i work with and it has 110 hours on it and he has never changed any fluids in it.He knows nothing about it and i am trying to learn.It came with two extra...

Hey guys I dont seem to be charging anymore on my farm pro 2425. I thought it might be the battery but not sure now. I took a meter and with the tractor running I put the leads on the battery...

Well I think I did it. Trashed the clutch on my 2425. I was brushing a food plot for deer and tried to push over a small tree. There was no noise indicating a major failure. I put the tractor...

i kinda know you all have said numerous times on here that the altenatoes are cheap and go out quick i think mine must be bad but tell me this is there an easy way to check it? why is there no big...

Hello everyone, This mower was bought 4 years ago and it has always been hard to get it into "gear" to mow. In fact I just turn it off, engage the pto and the start it back up so I don't hear it...

Trying to help a neighbor fix his ride! He's convinced the motor is locked up and is on the fence to go buy a zero turn and turn the tractor out to pasture. I thought I would lend a hand, but...

I wish it had a wider stance. When I first got the tractor, I rolled it using the FEL. Mostly because of inexperience. No damage done to it or me. Soon after I turned the wheels around to make...

I recently purchased a pto wood chipper and it states to run at 540 pto speed only. Does anyone know what the true 540 is ? Idle, half throttle, or full throtte? My lever is in 540.It seems that...

All- Any idea why when I had my steering cylinder rebuilt on my farm pro that I no longer have steering? Could there be an air bubble in the line that does not allow me to steer? I took the...

Looking for an exhaust/muffler for a FarmPro 2425. Any one know a reasonable priced place to purchse?

As the title says I cant get my lift arms on the 3 pt hitch to rise very far. Ive got a tiller on the back and I can just barely get it off the ground. I'm not sure how high these things go but it...

I bought a used 2003 Farm Pro 2425 with no manuals that has been sitting idle for about a year. I replaced the battery and starter, drained the fuel and added new fuel, cleaned enough...

Hello all: I have a couple of issues. First what is the easiest way to get a FEL (FarmPro) off the Farm Pro 2425 tractor? Second rear engine oil seal. Do I have to break the tractor in two to...

Can anyone tell me where the steering by pass valve is located on a FarmPro 2425? Mine tractor suddenly developed a quirk that requires me to <font color="blue"> </font> keep turning the wheel...

While doing ground work it developed some hydraulic fluid leaks. The hotter it got the more it leaked. . Two of the leaks were two missing plugs on top of rear axles. I plugged them with bolts. I...

Howdy! This is my first post here.... I have one of these Farm Pro 2425 tractors for several years now. Every now and then, I will snag the muffler's long exhaust pipe on a low hanging tree...

I made a post a week ago about my oil pressure being low. I do think the stock pressure guage was all wrong, and I replaced it with a sunpro guage and copper pressure line. When you first crank...

I have a 2004 farm Pro 2425 that's not wanting to crank. What's the best way to check soleniod and that it's getting the electrical supply it needs? It had acted up before but not sure if...

I seen a thread on here the other day about when turning the steering the steering wheel keeps turning even though the tires are as far as they can go.Now my farm pro 2425 is doing that and cant...

I've got a reatively new tractor (72 Hrs.). Changed oil and put on new water hoses. Brushed hogged for a couple of hrs, noticed engine starting to overheat. Parked tractor so I could work on it...

It seems im losing my power steering on my 2425. At times it gets really hard to steer and it even locks up sometimes. If i turn the steering wheel back and forth it seems to free up the steering...

More fun with my 300hr Farmpro 2425 (jinma 254). I was bathed in hydraulic fluid spewing from the junction. I seem to be replacing these often (different ones though, not the same). Is there a...

So I just split my tractor today to address the leaking gasket between the sump and flywheel housing. It went pretty well, minus a few minor hurdles. Ive got it stripped down to the gasket, there...

I have a problem. I got my 2425 stuck clearing trails. I put in in 4WD creeper no go. I locked the differential and got out O.K. Now when the left front tire is straight, the right front tire...

hey guys, ive got a farmpro 2425 and its a 2005. i have been told its same as the jinma 200 series, but correct me if im wrong. ive been having starting problems and thought the engine had...

I was wondering what this would be worth? It has 180 hours on it,detachable backhoe,comes with auger,box blade, scrape blade and an older bushhog. He wants $7000 for it. any thoughts?

I recently bought a used farm pro 2425 with FEL and a Backhoe(same as the Jinma 254?)(this is my first tractor)with 400hrs on it in December. I got it to the house and ran it a couple times the...

Good morning ! I purchased a 2006 farmpro 2425 from a friend with the farmpro or jinma loader and backhoe. Its my first tractor and I am getting the hang of using it. On the bottom of the backhoe...

Where do you let the fluid out at? I know where the fill is, but havent seen the drain. Also, where is the screen you are supposed to clean out? Any pictures would be awesome. This is the last...

Does anyone have Fram filter numbers for a Farm Pro 2425. The oil filter that came with the tractor is longer than the original so you have to drop the power steering lines to get it on. Thanks,Billy

My fuel bowl is shot on my Farm Pro 2425. I tried fixing it but it just broke. Is there a part that will replace these without having to order one? I have a couple tractor places around here but...

Hi I am looking for a loader for my Farm Pro 2425, this tractor has a aftermarket cab I live in Prince Edward Island canada if you could provide me an quote with shipping included that would be...

Can someone tell me why I have to turn my steering wheel about 10 times to get it to make a full right or left turn while driving straight? I know it works off the hydraulics, so could it be a...

A friend of mine just bought one , he got it without a backhoe but got a koyker FEL. He plans on adding a backhoe when he gets over the tractor purchase. What is the best backhoe for this tractor...

So I'm going through my heating issues noted here http://www.tractorbynet.com/forums/chinese-tractors/266032-farmpro-2425-jinma-254-hard.html and I found some rubber components that need...

I parked my farm pro 2425 in the barn with no problems. My goats got out and were climbing all over it. Now the clutch pedal is very loose. You can move it very easily with your hand and it grinds...

I have a Farm Pro 2425 and when i lift the 3 point with my brush hog hooked up I have a hydraulic leak. On the right side under the seat(the right side as your sitting on tractor) there is a hose...

Once again I come before you hat in hand with an abundance of ignorance and little else. I have a Farmpro 2425 tractor which has been great. Recently I have been having problems with it. I had an...

Hello all,I bought a 2002 Farm Pro 2425 with 71 hrs. it will idle but that is all. Will not throttle up.Thanks for any help.

Recently I had issues with my hydraulic pump so I pulled it and got a rebuild kit,(some seals and orings ),but when I put them in the seals are thicker than ones that were in it when you tighten...

Hello,This is my first post here.I just bought a 2003 farm pro 2425 from a guy i work with.He very seldom used it and don't know a thing about it.I have a weired problem with it in the electrical...

Hello. As mentioned, expecting my new 2425 to be delivered tomorrow! I have picked up alot of great info from the threads here. Got the Farm Pro to manage 5 acres. It is all on a hill side...

I have a Farm Pro that had about 30 hrs. before I parked it about 5 yrs ago......so I decided to put it back to work, so I bought a new battery hooked it up and it fired right up, worked it for...

I've let tractor set for close to 3 months. I started the other day and noticed the 3 or hitch not raising? It was working good before. I haven't vhecked fluid yet, but is there something else in...

Hi, still new to all this, how do I know if there is enough oil in the injector pump? There is no dipstick on the vent/fill cap. I know it takes 30W. Thanks!

does anyone know anything about m-mtractor in montpelier, ind. ? they have 2004 fp 2425 4x4 for 5999.00. does tha tseem reasonable? are there any hidden costs?

can someone tell me in English how to set the float position on the 3 pt hitch. I also want to change out the hydo fluid but can,t seem to locate a drain plug. This is the last newbe question...

I have a Farm Pro 2425. I was using it on Saturday and fluid started spraying out from under the steering wheel. I believe it's hydraulic fluid. Has any one had this happen, or know how to fix it...

I fill the hydraulic fluid, start the tractor and the fluid fills the crankcase somehow to the point that it runs out of the engines vent tube. Any Ideas?

Seems to be a rash of steering problems on here lately. I know the steering cylinder is shot because it leaked and, when I toook it apart, the ram is bent and the nylon seals are shot. Like a...

My bulbs on my brake lights are blown.the number on the bulb is QT12-21/5A which only comes back to a few chinese links.Anyone here know what bulb number i can use for these or am i going to have...

I have a 2007 Farm Pro 2425 4wd with the Y385 diesel engine. My issue is that I do not have any fuel going to the number 2 cylinder. I cleaned the fuel tank sediment bowl, replaced the fuel...

Hello all,I am kinda new at having a Chinese tractor so i am sorry if this is a stupid question.I just purchased a farm pro 2425 from an individual that also knew nothing about it.I have been...

Hey Folks! Happy Holidays! I bought a six foot scraper blade (farm pro brand) for the 2425. Problem: They didn't give me the two upright braces that go to the top point to the 3 pt hitch to...

I'm considering a 2005 Farm Pro 2425 that is a reasonable distance from me. 4x4 model and they say it's all works and has manuals. 712 hours. Mower not included but I don't need a mower. Is...

Hello, I have a friend who owns a Homier Farm Pro 2425 tractor and is needing a couple lift arms for it because he bent them (the arms with the balls on the ends). Where is the best / cheapest...

First time post and I am not super mechanical but I get buy. I own a FarmPro Tractor model 2425 and my backhoe hydraulic seems to be disengaged. I would like to move the tractor into our garage...

Greetings, does anybody know what the psi setting should be for the injectors in a Farmpro 2425 with a Y385 Engine? Thanks for your help.

Newbie here. Great forum by the way. I've had the steering wheel keep turning problem for a while but it steered fine, but yesterday the steering got downright hard to steer. If i turn to lock...

I just purchased a Farm Pro 2524 and have the opportunity to buy a Spirit SL-15 loader for a good price. It includes the right mounts (no bolts) and joystick controller. I cant find anything...

Does anyone know where I can get a front end loader for a Farm Pro 2425? I live on the east coast of Canada and the cheapest I can find one locally is 5199

When shifting the gears should you come to a complete stop and select your gear or can you shift on the go. a friend of mine just got his tractor today and was trying to shift it like a truck ...

Hello to all the members. This looks to be a great forum. Just bought my first diesel & first 4wd Chinese tractor. I'm still trying to figure out all the levers and doing some minor service & repairs.

Good morning, I have developed a pretty fast leak that Initially appeared to be coming from The steering box at the bottom of the steering shaft. However Now the steering shaft is leaking from the...

was mowing today with my 2425 with 18 hours on it when all of a sudden the engine acted if dieing and then would go again . this continued for about 3 minutes, all guagess were good and had good...

Hi all Farm Pro 2425 Engine Y385T Have a Napa oil Filter L14619 that is on, this cross references to a NAPA 1626 and it is just too big. Went back and got a napa 1381 and it is closer but still...

New to this whole thing but this looks like the place for help. I have a Farm Pro 2425 which I understand is a Jinma 254 knockoff. The tractor has just 27 hours on it, guy bought it and it was too...

Got a problem with my 3 Pt. the arms are stuck in the "up" position. No amount of "persuasion" can get them to budge. Any ideas?

I have a farm pro 2425 with FEL that I'm having some problems with blowing the hydraulic pump (2 gone in a year). It started last fall suddenly locking up while using the FEL, It would lock up and...

Anybody know where I can find a dealer in Oklahoma that carries injectors for this model? Thanks for help. Ken

I have a 2004 Farm Pro 2425 but I cannot identify the correct part #'s for standard maintenance items i.e. Air, Oil and Fuel filters etc. Does anyone have those part #'s or direct me to a site...

Hello ! Does anyone know off hand or have a diagram showing if the supply to the loader valve comes direct from the pump and the return from valve goes to the diverter valve or do I have that...

So I bought this little tractor with no attachments thinking they wouldnt be expensive. I really just need a loader for moving stuff around the property... anyone know where I can get the front...

Wish I knew more about these tractors but I dont know much about them! We got this 2425 for super cheap as the hydraulics didnt work. Once I got it home I noticed he had the hydraulic lines...

I need to change oil in my Farm Pro 2425 but can't find the drain plug, It's not where the manual says it is supposed to be. Any ideas?

Please delete figure it out

I adjusted the clutch last fall because I couldn't get pro to engage from the neutral position. It would make a grinding noise and not engage. After adjusting clutch it now engages fine , but when...

Where do I find a dip stick or site glass for checking hydraulic fluid?

Found a Farm Pro 2425 with 211 hours. It's in vgc starts easy, runs smoothand comes with a 5' bush hog. Only problems is hood latch , leak in top radiator hose and bush hog drive shaft needs a...

Hello everyone I am new to this forum and have a question about a 2425 clutch which stays engaged. The clutch petal has no resistance, it was working fine them slowly it became non responsive. I...

Going to look at a Farm Pro 2425 that looks almost new in pictures. It's a 2005 model. How much is it worth?

Post deleted by Travis_R

I have a 2425 and need to remove the FEL to get to the clutch inspection hole. My Clutch is constantly engaged and I need to know how to remove the FEL can someone assist me? I put the center bar...

Tractor is about 10 years old. Right rear wheel has locked up. Left will turn. Never had this problem before. Any ideas why

Hi, i have a buddy that is looking to buy a compact utility tractor for running a brush hog on some property he bought to hunt on. He found a Farm pro 2425 4x4 used in great condition. The weight...

I'm a newbie to this Chinese tractor thing.. Can any body lead me to a good manual/operator manual for a `06 Farm pro 2425 Y385 4wd. I need to know everything about this tinker toy. The unit came...

Hello I have been doing some searching and reading on the topic. Can anyone point me in the direction of the valve they used and how they plumbed it? I was ready to buy the ranch hand kit but...

Hello all, I have a Farm Pro 2425 and am trying to replace the oil seals and felt washer in the standing shaft section of the front left wheel. I finally got the housing for the bearings/seals off...

Hi, First of all im sure I am not the first to post about this but I cant seem to find the info. I have trans fluid leaking into my break hub. I have stripped it down but im not sure where to go...

I've noticed the only gauges that are lighted is the tach/ hour meter & the horn switch. It's no biggy, but are they supposed to be lighted? Or is this how they came. The other gauges have a hole...

Hi I am looking to sell my Farm pro 2425 it is a 2006 3 cylinder diesel 4x4 with aftermarket cab, it has approximatly 900 hours with a new clutch just curious what would be a fair price, there is...

While using the 2425 today moving dirt I had several leaks develop. I found a hose fitting that needed tightened near under seat, bottom of steering looks like bolts need tightened and two on top...

Got a new 2425, 25 hp, 4wd, 55 actual hours of run time; clutch throwout bearing is screaming at the last couple of inches before the final drive is engauged. Did the search of related subjects...

While using the 2425 today moving dirt I had several leaks develop. I found a hose fitting that needed tightened near under seat, bottom of steering looks like bolts need tightened and two on top...

Found another dealer whom claim the clutch linkage needs adjustment, the throwout bearing is screaming at the top of the engagement. Anyone familiar with how this done? I have no printed manual...