YM2210 - when & where to grease

[heitjer]

Hallo All!
I need some advice. I have had my YM2210 for three month now and finally got a grease gun. I used all purpose grease as it was recommended by a local shop.
Today I greased everything that I could find including the FL. I noticed that I had nothing on the rear axle. Can someone please point me to the right grease nipple for this (I seemed to be blind).

Thanks!

 

[winston1]

Don't think you need to grease the rear axle. It's lubed internally. You do probably have grease fittings under your foot rest areas where your brake and clutch petals pivot.

 

[heitjer]

That explains my 'blindness' - I was just wondering why my axles squeekes in slow gear. That's why I wanted to grease it up again.
Is there something else I can do?

 

[winston1]

I can't see it from here but would suspect the squeaking could be the brakes. Might take a look in that direction. I'm assuming you have checked your transmission fluid level.

 

[heitjer]

Great tip - haven't thought about that. Thanks!

 

[normde2001]

I highly recommend one of these, especially for hard-to-reach places that need lube. Fill with 90wt, stand back 5'-10', and squirt. No need to climb/crawl all over the equipment. Will squirt a stream 10-15'.