Yanmar YM2700

[Dr. Pepper]

I am the new owner of a old Yanmar YM2700. I recently replaced the front axles, spindles, hubs and bearings. The part that I am shocked to have the hardest time finding is the spindle, tang lock washer that holds the spindle/axle nut in place. According to parts manuals, it is number 17 on the diagram and the part number is (194130-12710). I have tried all of the local auto and ag. part stores and have had no luck online either. Any suggestions?

 

[bmaverick]

I am the new owner of a old Yanmar YM2700. I recently replaced the front axles, spindles, hubs and bearings. The part that I am shocked to have the hardest time finding is the spindle, tang lock washer that holds the spindle/axle nut in place. According to parts manuals, it is number 17 on the diagram and the part number is (194130-12710). I have tried all of the local auto and ag. part stores and have had no luck online either. Any suggestions?

Have you reached out to the parts network salvage yards for our Yanmars?

From the Yanmar Tractors Owners Group on GroupsIO, the largest community on the web for vintage Yanmars. Link in my signature below to also get your free manuals.

FREDRICKS EQUIPMENT
1312 South Bethel Rd.
Decatur, AL 35603
PARTS HOTLINE - 256-751-3555
email - parts@fredricksequipment.com
NEW On-Line SHOPPING - https://fredricksequipment.com/shop
Yanmar; YM / FX / F / Ke, John Deere / Kubota / Iseki / Mahindra / Others

HOYE TRACTOR PARTS INC.
2099 US Hwy 287 E
Iowa Park, TX 76367
PARTS HOTLINE - 940-592-0181
Contact page - Yanmar Tractor Parts:
On-Line Shopping - Yanmar Tractor Parts:
Yanmar Parts / John Deere / Yanmar Marine engine parts

SOUTHERN GLOBAL
404 First Street North
Wiggins, MS 39577
PARTS HOTLINE - 866-742-5748 Toll Free
email - sales@southern-global.com
On-Line Shopping - https://www.southern-global.com
New parts for Yanmar / John Deere / Others
Japan Tractor Salvage Yard
Engine overhaul/rebuild kits

STEVENS TRACTOR PARTS
3715 Highway 71
Coushatta, LA 71019
PARTS HOTLINE - 800-333-9143 Toll Free
email - sales@stevenstractor.com
On-Line Shopping - https://www.stevenstractor.com
Japanese and Domestic Tractor Parts for many makes and model brands
Engine overhaul/rebuild kits

WEAVER'S COMPACT TRACTOR
22 Fish Hatchery Rd
Shippensburg PA 17257
PARTS HOTLINE - 717-477-9332
On-Line Shopping - https://www.compactractorparts.com
Japanese and Domestic Tractor Parts for many makes and model brands

ALL STATES AG PARTS
10 Ellefson Dr
De Soto, IA 50069
email - support@tractorpartsasap.com
PARTS HOTLINE - 866-609-1260 Toll Free
On-Line Shopping - https://www.tractorpartsasap.com
13 Locations for tractors and parts, 10 salvage yards, and 2 repair centers all in the Mid-West
Japanese and Domestic Tractor Parts for many makes and model brands

SHEAFFER'S TOWN & COUNTRY TRACTORS INC.
320 Palmyra Rd
Dixon, IL 61021
PARTS HOTLINE - 815-284-3226
email - parts@sheftractor.net
On-Line Shopping - https://www.japanesetractorparts.com
Japanese and Domestic Tractor Parts for many makes and model brands

TRACTOR JOE PARTS
14385 23 Ave N
Plymouth, MN 55447
PARTS HOTLINE - 888-860-9096 Toll Free
On-Line Shopping - Yanmar Parts | Up to 60% off Dealer Prices | TractorJoe.com
Strong Yanmar Gray Market parts provider
Offers a comprehensive selection of equipment and parts for US Yanmar & Yanmar Gray Market tractors

 

[bmaverick]

I am the new owner of a old Yanmar YM2700. I recently replaced the front axles, spindles, hubs and bearings. The part that I am shocked to have the hardest time finding is the spindle, tang lock washer that holds the spindle/axle nut in place. According to parts manuals, it is number 17 on the diagram and the part number is (194130-12710). I have tried all of the local auto and ag. part stores and have had no luck online either. Any suggestions?

From the Parts Manual of the YM2700, YM2700L, YM2700R, I get the following.

 

[Barry 1]

Just google - Washer AW(NTN) and click on the Misumi site
Or Look for Misumi bearing lock nuts
They have both and in 10-50 mm+ .They have the measurements,so you can match up the size you need.

 

[winston1]

This is the #17 in question.

Bearing Tooth Lock Washer - AW Series | NTN | MISUMI

Shop Bearing Tooth Lock Washer - AW Series from NTN. MISUMI USA has all of your Bearing Lock Nuts needs covered, with over 3.8M high quality products and 80 sextillion configurable parts available with fast shipping and low pricing.

us.misumi-ec.com

 

[bmaverick]

This is the #17 in question.

Bearing Tooth Lock Washer - AW Series | NTN | MISUMI

Shop Bearing Tooth Lock Washer - AW Series from NTN. MISUMI USA has all of your Bearing Lock Nuts needs covered, with over 3.8M high quality products and 80 sextillion configurable parts available with fast shipping and low pricing.

us.misumi-ec.com

So, item-16 shows 25mm (about 1-inch hole)

I jumped to McMaster-Carr and found these.

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

I would assume this is either it or close enough.

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

The manual sure doesn't give a good image of the part. Not sure if the tang is internal or external.

I know it's not star-tanged because a bearing sits on the other side. So, it has to be smooth like a washer.

Other option is to find a 25mm nut as a nylock and use a 25mm ID regular polished chrome washer to seat against the bearing.

 

[Dr. Pepper]

This is the #17 in question.

Bearing Tooth Lock Washer - AW Series | NTN | MISUMI

Shop Bearing Tooth Lock Washer - AW Series from NTN. MISUMI USA has all of your Bearing Lock Nuts needs covered, with over 3.8M high quality products and 80 sextillion configurable parts available with fast shipping and low pricing.

us.misumi-ec.com

yes, that is the #17 I am talking about, thanks for the website. I have been looking online and have found this type of washer just not the right size. Looks like they have what I need. Thanks so much!

 

[Dr. Pepper]

So, item-16 shows 25mm (about 1-inch hole)

I jumped to McMaster-Carr and found these.

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

I would assume this is either it or close enough.

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

The manual sure doesn't give a good image of the part. Not sure if the tang is internal or external.

I know it's not star-tanged because a bearing sits on the other side. So, it has to be smooth like a washer.

View attachment 730225


Other option is to find a 25mm nut as a nylock and use a 25mm ID regular polished chrome washer to seat against the bearing.

It is a tanged/toothed washer on the outside. You are correct, it is right at 1" ID

 

[Dr. Pepper]

Just google - Washer AW(NTN) and click on the Misumi site
Or Look for Misumi bearing lock nuts
They have both and in 10-50 mm+ .They have the measurements,so you can match up the size you need.

Thanks, this website does look like it will have what i need.