yanmar dealer
- Thread starter YanmarEd
- Start date
- Views: 2593
careyo63
Elite Member
- Joined
- Jan 6, 2012
- Messages
- 2,734
- Tractor
- 77 Yanmar YM2000 63 Ford 2000
Depending Just how N.FL your located and were. If it's the Jacksonville area Spalding in Griffen Ga. If Your in NW. FL. Go to AL. Fredricks. They're the Largest Importer. Steve at Spalding also is supplied by them :thumbsup:
IMHO
IMHO
stoatspur
New member
Fredericks in Hartseille, Alabama. I recently purchased a YM1810D (thru best-used-tractors). Got it a week later near Louisville, Kentucky. Check out their inventory.
I am actualy north of Jville close to ga thanks I will look into them
Ginormous
Gold Member
YanmarEd -- I am also upgrading from my YM1700. I ordered a YM2210 from Fredricks in AL. It is supposed to arrive this evening! 
YanmarEd -- I am also upgrading from my YM1700. I ordered a YM2210 from Fredricks in AL. It is supposed to arrive this evening!
how mutch if I can ask
kenmac
Super Member
- Joined
- Feb 13, 2005
- Messages
- 9,937
- Location
- The Heart of Dixie
- Tractor
- McCormick CX105 Kubota MX 5100 HST,
clemsonfor
Super Member
He will tell you, he already posted the price i beleive in one of his threads about his 1700, he toward the end said he ordered it and then put the delivered price.
Ginormous
Gold Member
Yes, I believe the prices listed on Fredricks website are current. My YM2210 was $5020 + shipping to Ohio (ouch!) It arrived this morning. I didn't have much time to enjoy it before I had to leave for work, but it starts and runs great and otherwise seems to be in great shape. :drink:
Talked to RCO they said 6970.00 for a YM2310 delivered to N FL somebody give me a good reason to tell him to send it
clemsonfor
Super Member
I wont give you one, if you can get a 2210 for a few grand less than that, from a closer dealer! you will never notice that 1 HP!
careyo63
Elite Member
- Joined
- Jan 6, 2012
- Messages
- 2,734
- Tractor
- 77 Yanmar YM2000 63 Ford 2000
970.00$ would be a good one for me :laughing:
Ginormous
Gold Member
The differences between the 2310 and 2210 according to the data I have:
#1 cost -- about $1000 more for 2310
#2 HP -- but only 1 HP difference
#3 # of cylinders -- 2310 has 3 cyl vs. 2210 with 2... 2310 probably runs smoother and is a little quieter
#4 age -- 2210 was built from 77-79 and the 2310 from 80-81
#5 weight -- the 2310 is about 100 lbs LIGHTER than the 2210
That's all I've got...
#1 cost -- about $1000 more for 2310
#2 HP -- but only 1 HP difference
#3 # of cylinders -- 2310 has 3 cyl vs. 2210 with 2... 2310 probably runs smoother and is a little quieter
#4 age -- 2210 was built from 77-79 and the 2310 from 80-81
#5 weight -- the 2310 is about 100 lbs LIGHTER than the 2210
That's all I've got...
Shame your not close to East Texas, you could check this one out. I don't think it has a live pto? YANMAR 2210 W/TILLER Ginormous, I sent you a PM. :thumbsup:
