walleye
New member
Under full Throttle, what is the voltage i should see measuring across the battery?
X485 Voltage Outpur
- Thread starter walleye
- Start date
- Views: 1360
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 19,520
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
After start up I would expect 14.5 volts or so then slowly go down to 12.5 or so.:welcome:
hosspuller
Veteran Member
- Joined
- Oct 9, 2008
- Messages
- 1,794
- Location
- Piedmont Triad, NC
- Tractor
- Didn't intend to have a Deere fleet - it just happened 310C, F915,102, 5200 & 5065E
What Murph is describing is the function of the voltage regulator in response to the battery. If the battery or regulator is failing, you may not see those readings.
Does the x485 actually have an external brake solenoid switch? I see a solenoid switch on the right side that appears to bee part of forward and reverse pedals, but don't see one that is part of safety start switch. i am having trouble when hitting the key and starter not engaging. the brake linkage appears to be a little sloppy. any thoughts out there?
