italyguy01
Member
Hello, I have an X485, only about 130 hours on it. I started it up the other day, and when I was raising/lowering the deck, it seemed a lot louder then normal. So I cycled it up and down several times, no difference.
I shut the tractor off, and I went to check the Hydro fluid, when I unscrewed the dipstick, there was a bit of pressure released when I opened it. Fluid level was fine, clean (I changed the fluid/filter not too long ago). So I screwed it back down and restarted tractor, all is ok now? Any ideas? What would cause the pressure? Something wrong?
Thanks in advance
I shut the tractor off, and I went to check the Hydro fluid, when I unscrewed the dipstick, there was a bit of pressure released when I opened it. Fluid level was fine, clean (I changed the fluid/filter not too long ago). So I screwed it back down and restarted tractor, all is ok now? Any ideas? What would cause the pressure? Something wrong?
Thanks in advance
