Work lamp

   / Work lamp #1  

murphy1244

Super Star Member
Joined
Nov 25, 2011
Messages
16,336
Location
Ohio
Tractor
Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
Any you fellow pack members hook up the optional rear work light on a dK ? How, What switch? Is wiring there?
 
   / Work lamp
  • Thread Starter
#2  
Noone here has ever wanted a rear work lamp?
 
   / Work lamp #3  
I put a rear work light on mine back in Jan. can't remember the hook up method thinking was very simple wires were there on my DK40 SE
 
   / Work lamp #4  
Mine (2006 model bought used in 2009) came with the rear work light already installed behind the seat. So I can't comment on installation. I can say the light comes on via a toggle switch on the light housing and also when tractor is in reverse. I have the somewhat odd DK45S configuration with the new-style engine control linkages and the old style (planetary final drive) transmission and chassis.
 
   / Work lamp
  • Thread Starter
#5  
Well, I talked to Bob at MIE and he informed me the switch is on the light and the wiring is in the fender. He also threw in free hardware. As cheap as this light is you would think it would be included on the machine along with the trailer pin set-up. And there isn't any power jacks. I have one on my Simplicity.
 
   / Work lamp #6  
Well, I talked to Bob at MIE and he informed me the switch is on the light and the wiring is in the fender. He also threw in free hardware. As cheap as this light is you would think it would be included on the machine along with the trailer pin set-up. And there isn't any power jacks. I have one on my Simplicity.

More technically the wiring is under the U channel crossbar between the fenders (or at least it is on my DK35se). Also the trailer connector end wiring is there too. I used the wiring to feed my sprayer.

James K0UA
 
   / Work lamp
  • Thread Starter
#7  
More technically the wiring is under the U channel crossbar between the fenders (or at least it is on my DK35se). Also the trailer connector end wiring is there too. I used the wiring to feed my sprayer.

James K0UA

Thanks james I could not find it without your help.
 

Tractor & Equipment Auctions

Skid steer auger plate (A50322)
Skid steer auger...
2020 Westfield MKX 100-83 Auger with Swing Hopper (A52748)
2020 Westfield MKX...
2004 MACK GRANITE CV713 DUMP TRUCK (A51406)
2004 MACK GRANITE...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2014 Dodge Ram 5500 4x4 Bucket Truck with Altec AT40M - 45FT Boom, Jib Winch and Utility Bed (A52748)
2014 Dodge Ram...
2018 TAKEUCHI TL8 SKID STEER (A51246)
2018 TAKEUCHI TL8...
 
Top