Backhoe Woods Subframe: Installation on CT230

   / Woods Subframe: Installation on CT230 #11  
I got the Woods BH75, but with our wet spring I haven't been able to do much. I ended up building a dolly for it so mounting only takes about 10 minutes.
How about a photo of your dolly. I have the same backhoe. TIA
 
   / Woods Subframe: Installation on CT230
  • Thread Starter
#12  
You can find some photos of the dolly in another older thread in the Build-It-Yourself forum. Here's the link.

I didn't really do any "plans" for the dolly, just mostly "field-engineered" the thing with some casters and a bunch of 1 1/4 square tube. The important thing with a dolly is to make sure the hoe rolls up to the subframe with about 1/4" vertical clearance for the bottom pins of the 4-point mount. That way the pins immediately slip right into the slots when you raise the hoe with the stabilizers. Alignment becomes trickier and more frustrating the greater that initial clearance happens to be.
 
Last edited:
   / Woods Subframe: Installation on CT230 #13  
Link did not work for me.
 
   / Woods Subframe: Installation on CT230
  • Thread Starter
#14  
Link fixed! (I hope)
 

Tractor & Equipment Auctions

PAIR OF 29 FT PIPE RACKS (A50854)
PAIR OF 29 FT PIPE...
2016 Chevrolet Caprice Sedan (A50324)
2016 Chevrolet...
2015 International DuraStar 4300 Street Sweeper Truck (A50323)
2015 International...
3000 Gallon Black Poly Water Tank (A49461)
3000 Gallon Black...
2013 Toyota Prius Hatchback (A50324)
2013 Toyota Prius...
1998 CATERPILLAR D5M PIPE LAYER (A50854)
1998 CATERPILLAR...
 
Top