Imaybail
Bronze Member
How about a photo of your dolly. I have the same backhoe. TIA
Backhoe Woods Subframe: Installation on CT230
- Thread starter DaveK OR
- Start date
- Views: 11004
-
- Tags
- bobcat ct230
You can find some photos of the dolly in another older thread in the Build-It-Yourself forum. Here's the link.
I didn't really do any "plans" for the dolly, just mostly "field-engineered" the thing with some casters and a bunch of 1 1/4 square tube. The important thing with a dolly is to make sure the hoe rolls up to the subframe with about 1/4" vertical clearance for the bottom pins of the 4-point mount. That way the pins immediately slip right into the slots when you raise the hoe with the stabilizers. Alignment becomes trickier and more frustrating the greater that initial clearance happens to be.
I didn't really do any "plans" for the dolly, just mostly "field-engineered" the thing with some casters and a bunch of 1 1/4 square tube. The important thing with a dolly is to make sure the hoe rolls up to the subframe with about 1/4" vertical clearance for the bottom pins of the 4-point mount. That way the pins immediately slip right into the slots when you raise the hoe with the stabilizers. Alignment becomes trickier and more frustrating the greater that initial clearance happens to be.
Last edited:
Imaybail
Bronze Member
Link did not work for me.
Similar threads
