Woods RC5

[dinoedwards]

Was told I do not need a FLEX Link for this cutter that the arms move and eliminate the need for one?
Also, round shaft so no slip clutch will work, must change out shaft.
Just gonna get a few extra shear pins.

 

[TMGT]

They make slip clutches for round shafts so most likely you can add a slip clutch if you want.

Does the top of the A frame slide in the brace? I have an older Woods mower that had a flex joint built into the A frame for the 3pt.

 

[Tinhack]

Yes, round shaft clutches are available.

This is your Flex Joint. It allows the rear wheel to rise and fall with the terrain.

Edit: Added link to clutch.

 

[dinoedwards]

Yes figured it out Tinhack, thanks, dealer told me have to change out gear, I'll be looking for a slip clutch go this going forward. Thanks again!