WoodMaXX Chipper

   / WoodMaXX Chipper #1  

Mowin Fool

Member
Joined
May 6, 2013
Messages
29
Location
Mansfield, Ohio
Tractor
Mahindra, John Deere
Received my Woodmaxx 8 Mechanicl Feed PTO chipper last weekend, took 3 hours to assemble and have used it for about 8 hours on my 28Max and does a great job. Well engineered and built chipper for any money. 28 horse is about as small an engine as I would put it on as I have close to stalled it on a few 5" maple limbs. Keep em under 3' long and it is OK.
 
   / WoodMaXX Chipper #2  
I got my Woodmaxx just like yours about 2 months ago. My assembly was a little more challenging as one of the panels was a little bend during shipping. But the Woodmaxx folks (thanks Amanda!) were great at sending me the replacement panel at no charge ASAP. I only have about an hour of use on my 4035HST. I was able to do some 6 inch diameter logs just fine. I never stalled the tractor, but I did manage to get a couple of pieces stuck because I was being just a little too aggressive with what I was feeding. But it gave me some good experience with clearing jams! Overall very happy so far!
 

Tractor & Equipment Auctions

2020 Cat 299D3XE Skidloader (RIDE AND DRIVE) (A50774)
2020 Cat 299D3XE...
Chevrolet C8500 Flat Bed with a Moffet Kit (A52748)
Chevrolet C8500...
2015 Ford Transit 250 Cargo Van (A50323)
2015 Ford Transit...
24in Tractor Backhoe Bucket BT4555 (A52748)
24in Tractor...
New Wolverine72 In Skid Steer Brush Cutter (A53002)
New Wolverine72 In...
2024 Bintelli 4PR Activ-EV Pulse (A50324)
2024 Bintelli 4PR...
 
Top