BalsomsViewFarm
New member
Built a pallet fire wood box. Tried to lift it with slip on pallet forks, no luck. Think of getting a quick attachment with forks to get the weight closer to the tractor?
wont lift pallet
- Thread starter BalsomsViewFarm
- Start date
- Views: 2448
Diggin It
Super Star Member
What does the box weigh empty? Did you try loaded or unloaded?
If you mean forks that clamp onto the front of the FEL, there have been a few threads about that not being very efficient at lifting.
If you mean forks that clamp onto the front of the FEL, there have been a few threads about that not being very efficient at lifting.
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,494
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
How big is the box? And yes SSQA forks would be a lot better.
WranglerX
Super Member
My itty bitty SCUT will lift 800 pounds at the FEL..... Think your tractor might have a problem that even a SSQA is not going to help....
(before everyone gets their panties in a twist, this was staged [under controlled conditions] as an example for need of ballast box)
520 pound (by JD manual) mower..... Need to have rear ballast box to do it though....
Dale
(before everyone gets their panties in a twist, this was staged [under controlled conditions] as an example for need of ballast box)
520 pound (by JD manual) mower..... Need to have rear ballast box to do it though....
Dale
davrow
Veteran Member
If you need to buy something anyway, thought about 3pt forks? Higher lift capacity.
goeduck
Super Member
Pictures? Size of tractor? Need more details
jeff9366
Super Star Member
- Joined
- Jan 14, 2011
- Messages
- 12,777
- Tractor
- Kubota Tractor Loader L3560 HST+ ~~~~~~~~~~~~~ 3,700 pounds bare tractor, 5,400 pounds operating weight, 37 horsepower
Insuffecient information.
PEJ5
Gold Member
What was the nature of your "no luck" - rear tires lifted or pressure relief valve kicked in? You have a good size tractor so it should be able to lift a good load. Even without more details, getting the load closer to the loader pins will make a significant improvement, but you also must have a counter weight on your 3pt hitch such as a heavy implement or a heavy ballast box.
grsthegreat
Super Star Member
also need to take into account the weight of a true pallet forks attachment. if i remember mine comes in at like 400# without anything on the forks. Whats the lift capacity of your tractor
4570Man
Super Star Member
- Joined
- Apr 7, 2015
- Messages
- 18,494
- Location
- Crossville, TN
- Tractor
- Kubota M59, Kubota L3800, Grasshopper 428D, Topkick dump truck, 3500 dump truck, 10 ton trailer, more lighter trailers.
The bucket and the clamp on forks almost certainly weighs more than the dedicated forks.