Winch Valve ?

[bjcsc]

OK, so I guess you don't need the pics. Your truck has a PTO on the front diff? IMO, you'd be better off looking at a Milemarker and selling what you've got. That winch would be ideal on a tractor. When it all shakes out, you'll be close dollar-wise (and you'll have an extra 2500lbs of pull). A general rule of thumb is that the reservoir should be at least the same volume as required per minute. So you need at minimum a 15gal reservoir and then a 15gpm pump...

 

[WildWest]

No my transmission and transfer case has places to hook up a pto

I have a power take off but i have to get a pump possibly another power take off as i hear they are geared differently

i dont think i could sell what i have for enough money to get a new milemarker i got this setup at a good deal ill keep it and use it for something.

I couldnt imagine needing a 15 gallon tank that seems a bit much

I would apreciate some pics of your setup if nothing else to to admire it .

 

[bjcsc]

I would apreciate some pics of your setup if nothing else to to admire it .

I'll post a few to this thread the next time the sun comes out (should be Saturday)...

 

[bjcsc]

Nice and sunny today! Here are some pics of my setup. You can't really tell from the pics, and I take no credit for the plumbing as I simply followed Milemarker's instructions, but the flow goes like this: Pump high pressure to winch in, winch out to steering box in, steering box out back to reservoir. I chose not to mount the remote connection on the winch and instead put it inside.