Which Diverter/Selector Valve will work?

/ Which Diverter/Selector Valve will work? #1  

Gomer

Silver Member
Joined
Dec 20, 2006
Messages
126
Location
West Michigan
I an planning to add a thumb on B2630 FEL and would like to add a diverter or selector valve to the FEL control so I can switch between rolling the bucket and pinching the thumb. I found these two valves and I know very little about hydraulics but I think only the one (1782)will work. Advise? comments?
 

Attachments

  • AS9-1782.pdf
    63.5 KB · Views: 357
  • AS9-5117.pdf
    167.1 KB · Views: 251
/ Which Diverter/Selector Valve will work?
  • Thread Starter
#3  
113 views and 1 reply, is there a better way to do this? Am I missing something?
Or is this too technical and I should limit my questions to whether a horn is a safety device or not.:rolleyes:
 
/ Which Diverter/Selector Valve will work? #4  
Gomer said:
113 views and 1 reply, is there a better way to do this? Am I missing something?
Or is this too technical and I should limit my questions to whether a horn is a safety device or not.:rolleyes:

Your first choice looks the best. There, now you have another reply and I have another post.
 
/ Which Diverter/Selector Valve will work? #6  
Gomer said:
113 views and 1 reply, is there a better way to do this? Am I missing something?
Or is this too technical and I should limit my questions to whether a horn is a safety device or not.:rolleyes:

You posted this same question in the hydraulic forum correct?
 
/ Which Diverter/Selector Valve will work? #7  
They look like they both would allow you to use the rolling circuit to control the thumb. The difference is the 1782 uses a momentary push button to switch control while the 5117 uses a single pole, double throw switch. I think I'd like the push button better. "Push the button, move the thumb-let go of the button and roll the bucket". Otherwise you'd have to flip the SPDT switch back and forth.
 
/ Which Diverter/Selector Valve will work? #9  
Gomer said:
113 views and 1 reply, is there a better way to do this? Am I missing something?...

Maybe those 113 are others looking for answers as well. Or, maybe they already answered your other post...:rolleyes:
 
/ Which Diverter/Selector Valve will work?
  • Thread Starter
#10  
Thanks for the feedback, Mike,yea that's what I was thinking too. Yes I posted over there because I wasn't getting anything here, sorry for the confusion.
 

Marketplace Items

Mayrath 10" x 34' Truck Auger (A66285)
Mayrath 10" x 34'...
2017 Hyundai Santa Fe AWD SUV (A61574)
2017 Hyundai Santa...
2013 Mack CXU613 T/A Day Cab Truck Tractor (A64556)
2013 Mack CXU613...
20ft Jumper Cables (A65583)
20ft Jumper Cables...
New Landhonor LHR-COA200,  200lb Cast Iron Anvil (A62679)
New Landhonor...
New/Unused Wolverine 43in Mini Rock Bucket (A65583)
New/Unused...
 
Top