Wheel change YM1510D

[Jjpbe]

Hi,
I would like to jack up my YM1510D to change the wheels. I don稚 have the service manual and I am not sure how to do this. Are there specific points where I can jack up the tractor? Any suggestions welcome. Thanks.
Jjp

 

[HoyeTractor]

I don't think there is really any specific location. If you are only jacking up one wheel at a time I would just put the jack under the lift arm pin area in the rear and on the front I would just put the jack under the axle casting on the one side. Just don't ever get under it and use jack stands when possible. Those tractors are small but extremely heavy.

 

[Jjpbe]

Thank you Aaron. That’s the information I wanted to know.
Jjp

 

[California]

There's not much delicate under there. Just glance to see you don't get under a brake lever etc.

I like to slide a wheel/tire under a vehicle as soon as one is off, as a backup to the jack or jackstand.

 

[Jtullis13]

Just make sure you have a jack stand under there and not just your jack, safety first Jjp