What's it worth
- Thread starter Ridge
- Start date
- Views: 2869
clemsonfor
Super Member
dont trade it , they will give you like $3-4500 i bet!!! used and trades is where all kinds of dealers make money.
bmaverick
Super Member
- Joined
- Sep 17, 2013
- Messages
- 5,635
- Location
- Beloit-WI
- Tractor
- Yanmar YM2610 ■YANMAR GURU■ EXTRAORDINAIRE
Fredricks right now is offering a YM1800D 4x4 with a newer Koyker 120 loader and new R1 tires for $9,494. It's completely restored to new condition. Yanmar Ymg1800d, 4x4, Loader, 22hp, Decatur AL - 112747620 - EquipmentTraderOnline.com
Personally, turf tires would do nothing for my tractor use. Actually maybe even worse for the tasks I need the tractor for. I would get stuck too often with turf tires. The YM1800D is similar to the JohnDeere-650 2-cly Yanmar. It has power for the FEL, but it's slow going overall getting tasks done. I've seen these in action.
Here's the Fredricks model all restored.
If you have some good hours already clocked that would lower the value some. If the tractor was well kept and shed/barn kept, that would hold or give a slight price advantage. Remember, you are offering a tractor that was made in the early '80s as a CUT. The LS you are seeking is about $30K give or take $5K new. LG does make a good machine. If I had to do it again, it would be a hard toss up of a an LS-3038 vs. a Yanmar YM3110D 4x4 restored by Fredricks. Both are equal machines overall. Fredricks has a 1-year warranty. I think the LS is 3-years. The cost for the Yanmar is 1/2 that of the LS. Both has the PowerShift or Sync-Shuttle shifting (automatic like).
Yanmar YM3110D 4x4 w/FEL$12,294 Yanmar Ym3110d, 4x4, 140 Koyker Loader, 37hp, Decatur AL - 106604732 - EquipmentTraderOnline.com
LG LS-3038 about $32,000 G3038 « LS Tractor USA
A co-worker got an LS the year before I got my YM2610. He nearly flipped out when I told him my CUT restored better than factory was under $5,900. If I would have added the FEL, the price would have been $9,300. I could have nearly bought TWO Yanmars for the price of his LG LS-3038.
Personally, turf tires would do nothing for my tractor use. Actually maybe even worse for the tasks I need the tractor for. I would get stuck too often with turf tires. The YM1800D is similar to the JohnDeere-650 2-cly Yanmar. It has power for the FEL, but it's slow going overall getting tasks done. I've seen these in action.
Here's the Fredricks model all restored.
If you have some good hours already clocked that would lower the value some. If the tractor was well kept and shed/barn kept, that would hold or give a slight price advantage. Remember, you are offering a tractor that was made in the early '80s as a CUT. The LS you are seeking is about $30K give or take $5K new. LG does make a good machine. If I had to do it again, it would be a hard toss up of a an LS-3038 vs. a Yanmar YM3110D 4x4 restored by Fredricks. Both are equal machines overall. Fredricks has a 1-year warranty. I think the LS is 3-years. The cost for the Yanmar is 1/2 that of the LS. Both has the PowerShift or Sync-Shuttle shifting (automatic like).
Yanmar YM3110D 4x4 w/FEL$12,294 Yanmar Ym3110d, 4x4, 140 Koyker Loader, 37hp, Decatur AL - 106604732 - EquipmentTraderOnline.com
LG LS-3038 about $32,000 G3038 « LS Tractor USA
A co-worker got an LS the year before I got my YM2610. He nearly flipped out when I told him my CUT restored better than factory was under $5,900. If I would have added the FEL, the price would have been $9,300. I could have nearly bought TWO Yanmars for the price of his LG LS-3038.
clemsonfor
Super Member
Thats my point, nice is only relative to what you can get a redone one with a warrenty from frederics for.
I would not pay too much for a used one, but $1500 + delivery + sales tax is a good chunck of change to save on a machine that has been proven but not beat.
I would not pay too much for a used one, but $1500 + delivery + sales tax is a good chunck of change to save on a machine that has been proven but not beat.