Tractor 2202
New member
I have an Iseki 2202 4wd with front loader and agri tyres, can someone tell me what pressures I should be running in the tyres
What tyre pressure
- Thread starter Tractor 2202
- Start date
- Views: 3302
George2615
Super Member
Usually recommended tire pressures are marked on the side walls of the tires.
For loader work I recommend the maximum pressure listed. On mine I run about 40-45 PSI in the fronts and 18-20 in the rears.
Yours may vary depending on tire size.
For loader work I recommend the maximum pressure listed. On mine I run about 40-45 PSI in the fronts and 18-20 in the rears.
Yours may vary depending on tire size.
buickanddeere
Super Member
What does the operator's manual state? For loader work the rear tires should on the low side of the range.
LD1
Epic Contributor
Ditto. Read the sidewall of the tire
varmint
Elite Member
- Joined
- Mar 17, 2003
- Messages
- 2,581
- Location
- Northern Maryland
- Tractor
- Kubota B8200, then a Kubota L3130 HST, now a Kubota L3400 HST
I've read that, like stated above, you want your fronts at the max. pressure shown on the sidewall: that should be their greatest load-bearing, and adjust the rears so the tread is flat against a flat surface. Somebody, maybe the guy at Everything Attachements (?) demonstrated how they do that.
