What piece am I missing?

[dre2315]

I recently got a Iseki TU1600, and I'm looking to attach a 3-point hitch to it.
But it looks to me I won't be able to attach the central rod. Looks like I am missing a part.
Can anyone help with a picture for the piece I am missing? And maybe where to get it from?

THanks!

 

[jeff9366]

Central rod = Top Link in tractor parlance.

It is probable your 1,200 pound tractor has "Category 0" size TPH. Category 0 implements can be difficult to source.

This may be one source: Buckeye Tractor Online Catalog - Garden Series Page 01




PHOTOS: iseki tu16 - Google Search

iseki tu16 three point hitch - Google Search

tractor three point hitch diagram - Google Search


ISEKI PARTS: iseki tractor parts - Google Search

 

[dre2315]

Thanks Jeff. Will look it up!

 

[skipperbrown]

Your tractor is similar to a JD model M (I think) that my family had in the 50's through the 70's. It was probably about a 25 hp tractor. We had cultivator and sickle mower attachments that could be lifted, but we used the drawbar for everything else (trailer, plow, and pull type bush hog).

 

[Roadworthy]

Measure your pin diameters. I believe the Japanese Category 0 hitch uses the same geometry as the American Category 0 but the pin diameters are the same as the American Category 1.

 

[jeff9366]

Measure your pin diameters. I believe the Japanese Category 0 hitch uses the same geometry as the American Category 0. The pin diameters are the same as the American Category 1.

No, Category 0 hitch pins are of lesser diameter than Category 1 hitch pins.

THREE POINT HITCH SPECIFICATIONS: TractorData.com - Three-Point Hitch

All dimensions of the (Ferguson) Three Point Hitch are a world standard.

 

[denchen]

Not sure if this helps, but this is my Iseki 2140[

 

[marcelPL]

Just google 'iseki tu1600 rear' and choose 'images' . You will find enough to get an idea of what you are looking for.

Example:

https://static.landwirt.com/8032-753eeff05eb1eb7a040c01e5d80edb9e-2344555-5vb.jpg

are you in US or Europe?

thx
M.

 

[lens12]

your tractor came with a 2 point tiller which is attached to it in the picture. I can supply a top bracket but you would need to drill the bolt holes or give me the bolt to bolt dimensions.