What is this tool.

   / What is this tool. #11  
It's a veterinarian tool for horses. It must be properly warmed in cold weather before use.

....and the veterinarian must not stand directly behind the horse when being used....
 
   / What is this tool. #12  
Emergency shut-off valve for a loud cell phone talker.

Bruce
 
   / What is this tool. #13  
I think it is a depth gauge for checking concrete thickness as it is poured and before final finishing. Used on wide floors so you don't thin it out in the middle. Just turn the piece to the desired thickness and poke it in. The cone on the end is a little unusual but is probably intended to work the rocks in the concrete out of the way so the inspector gets a true reading.
 
   / What is this tool.
  • Thread Starter
#14  
Is there any history that may give us a clue?

I found this at a flea market.

It is about 18 in long.

The cone end spins freely, and it appears to sit in a saddle of some kind.

As you turn the handle the rod and cone assembly moves fwd.
 
   / What is this tool. #15  
I found this at a flea market.

It is about 18 in long.

The cone end spins freely, and it appears to sit in a saddle of some kind.

As you turn the handle the rod and cone assembly moves fwd.

How much you pay for it?
 
   / What is this tool. #16  
I'm thinking some kind of puller.
 
   / What is this tool. #17  
I found this at a flea market.

It is about 18 in long.

The cone end spins freely, and it appears to sit in a saddle of some kind.

As you turn the handle the rod and cone assembly moves fwd.

It looks to me like the lugs on opposing sides of the spindle part are supposed to hold it into >a missing part< where the "cone" can be screwed down into whatever...? possibly the same "missing part" would hold the "whatever"?
 
   / What is this tool.
  • Thread Starter
#19  
No markings

The trunnion part I believe sits in a saddle of another part to push on something.

Whether it is auto related , or gas line, or part of a flare tool, I don't know.

I only paid $2 for it. Thought it was a dent puller.
 

Tractor & Equipment Auctions

2015 KENWORTH T370 QUINT AXLE DUMP TRUCK (A51222)
2015 KENWORTH T370...
2020 KUBOTA RTV X1100C UTV (A51406)
2020 KUBOTA RTV...
2017 JCB 3CX 15HFCE BACKHOE (A51242)
2017 JCB 3CX...
2013 John Deere 544K Articulated Wheel Loader (A50322)
2013 John Deere...
2025 78in Dual Cylinder Hydraulic Grapple Rake Skid Steer Attachment (A50322)
2025 78in Dual...
WEATHERFORD MP-10 TRIPLEX MUD PUMP POWERED BY A CATERPILLAR 3412 ENGINE (A50854)
WEATHERFORD MP-10...
 
Top