Well and water

/ Well and water #41  
Don,
I have pulled the airstone three times and cleaned it with muriatic acid since summer of 98. When it is due for cleaning, it tells you as the "normal" lump in the center of the pond is significantly reduced in height. I use a duck decoy on a stainless steel line to the stone to permit easy recovery of the stone when required, as it is more attractive than a buoy or float. I have not had to do any maintenance other than cleaning the airstone and changing two filters every six months or so. The manufacturer recommends changing the compressor vanes every 2-4 years and the bearings every 2-6 years, however, I have not found it necessary to do either, so far. The system I have cost $2200 in 1998. I have attached a photo of the pond taken this morning. The contact who picked up the product from Pond Filtration is Skip Fiting at Natural Reflections LLC his phone is: 736-682-2080, email is: reflections7@charter.net. I wasn't willing to risk the safety issue on eletrical connections in the pond with grandkids playing and fishing, regardless of the odds.
Bill
 

Attachments

  • 409354-Pond April 04-50.jpg
    409354-Pond April 04-50.jpg
    94.5 KB · Views: 159
/ Well and water
  • Thread Starter
#42  
Thanks for the contact. Nice looking pond. Looks about the same size as mine. Wish I had slopes to provide runoff to keep it full...
 

Marketplace Items

2020 PETERBILT 367 (A65643)
2020 PETERBILT 367...
Timberjack 608B FellaBuncher (A62679)
Timberjack 608B...
iDrive TDS-2010H ProJack M2 Electric Trailer Dolly (A59228)
iDrive TDS-2010H...
NEW Wolverine ADB-13-1218R, Skid Steer Auger (A62679)
NEW Wolverine...
2022 New Holland Boomer 45 (A64126)
2022 New Holland...
2016 Deere 180G (A60462)
2016 Deere 180G...
 
Top