srs
Veteran Member
Runner, very nice workmanship! Just curious what are the two rods at the bottom with what appears to be blue taped attached to it?
Welding Table
- Thread starter Runner
- Start date
- Views: 13662
OP
Runner
Elite Member
- Joined
- May 12, 2007
- Messages
- 4,080
- Location
- Missouri
- Tractor
- 2024 Cub Cadet Ultima ZTXS5 54, 2007 John Deere 2520, 1989 John Deere 185, 1960 Panzer T70B
srs,
The rods are the ends of a pair of scissors jacks I mounted under the table to use for brakes. At the time I thought I needed them. Since then, I've found that the table (at over 500 lbs) is almost impossible to move, even when I want to, much less when I don't, so I really don't need them.
However, I DO need some type of levellers since my floor is a little uneven. That is a project for a future day I guess...
The rods are the ends of a pair of scissors jacks I mounted under the table to use for brakes. At the time I thought I needed them. Since then, I've found that the table (at over 500 lbs) is almost impossible to move, even when I want to, much less when I don't, so I really don't need them.
However, I DO need some type of levellers since my floor is a little uneven. That is a project for a future day I guess...
Attachments
srs
Veteran Member
Pretty neat! Thanks.
Nice tables.
I build these as teardown tables for transmission work etc. I use 1" x 2" x 14ga. rectangle tubing and a 3/16" top plate. The table is 40" off the floor and has a 60" x 30" top. The top slopes back and toward the center and drains waste fluids into a simple 5 gallon bucket. They are easy to manuver with the 4 locking casters. I build these with all new steel and new casters and sell them for about $400 ea.
I build these as teardown tables for transmission work etc. I use 1" x 2" x 14ga. rectangle tubing and a 3/16" top plate. The table is 40" off the floor and has a 60" x 30" top. The top slopes back and toward the center and drains waste fluids into a simple 5 gallon bucket. They are easy to manuver with the 4 locking casters. I build these with all new steel and new casters and sell them for about $400 ea.
Last edited:
