Welding in the dirt

   / Welding in the dirt #11  
I have used two saw horses and a sheet of plywood in the past for a table for welding. You just have to make sure it doesn't catch fire.
It's also really hard to get a ground!! ;)
 
   / Welding in the dirt #12  
Does using concrete backer board(the stuff under tiles) contaminate a weld. I've used it both for welding and plasma cutting, but am a little worried about contamination.

Chris
 
   / Welding in the dirt #13  
I like the pier block idea.:thumbsup:

Why can't I think of great ideas!!

RC

Looks like another successfully answered question. :)
The pier blocks are something I'll have to remember.
 
   / Welding in the dirt #14  
If you are exceptionally flush with money, just go to your local welding supply and buy some Sumner brand of adjustable jack stands. OR look them up on the internet and build some similar to them using bolt heads. The material isnt going to be cheap but you can use a pair with angle iron between them and make an easily levelled saw horse type of support. This is the brand we use on our construction sites due to their ruggedness and safety in designed of load rating.
They are SO worth it, and you can sometimes find deals on Craigslist etc.

Proper stands are a game changer, they are PORTABLE, and they don't get filled with junk like tables.
 
   / Welding in the dirt #15  
Gary Fowler said:
If you are exceptionally flush with money, just go to your local welding supply and buy some Sumner brand of adjustable jack stands. OR look them up on the internet and build some similar to them using bolt heads. The material isnt going to be cheap but you can use a pair with angle iron between them and make an easily levelled saw horse type of support. This is the brand we use on our construction sites due to their ruggedness and safety in designed of load rating.

Sumner Manufacturing Co., Inc. Sumner Manufacturing Company Inc. - Lifts, Jacks and Stands, Handi-Bench, Welding Tools, Material Carts and Pipe Supports


image-2168898190.jpg


I am with Gary. Throw some pipe jacks together. They don't have to be special just usable
 

Tractor & Equipment Auctions

2012 Case IH Patriot 3330 Self Propelled Sprayer (A50657)
2012 Case IH...
1973 CATERPILLAR 988 LOADER (A51222)
1973 CATERPILLAR...
2014 Peterbilt 320 Altec AH150 Boom Truck (A49461)
2014 Peterbilt 320...
1993 Mono Dump Trailer (A50514)
1993 Mono Dump...
2013 Toyota Prius Hatchback (A50324)
2013 Toyota Prius...
1982 LeeBoy Motor Grader (A51039)
1982 LeeBoy Motor...
 
Top