Welded a Cat 650 Dozer stack (MIG)

   / Welded a Cat 650 Dozer stack (MIG) #41  
As with all welding, proper joint prep is your friend! :D

Notice how Michael walks the cup in the bevel of the pipe? In all the Navy yards here in the Puget Sound area that is a big The Navy believes the cup will contaminate the weld!
 
   / Welded a Cat 650 Dozer stack (MIG)
  • Thread Starter
#42  
Interesting - dang I was almost going pro with that technique! The cup contacts the bevel behind the puddle though. He also recommends using soapstone to reduce friction where the cup touches.
 
   / Welded a Cat 650 Dozer stack (MIG) #43  
Welp, you know the old saying. The right way, the wrong way, and the Navy way.:laughing:

When the USS Thresher sank in 1963, it turned the Navy's welding program upside down.
In the 1970s I took a stainless steel pipe welding class at Olympic college in Bremerton. The teacher was a P1 high pressure Tig welder in PSNS. He told me he would not accept a pipe joint that the gap varied more than 0.10 of an inch all the way around the pipe.:shocked:
 
   / Welded a Cat 650 Dozer stack (MIG) #44  
Here's a technique I always wanted to learn. To late for me now, I don't have the eye sight for it:(. Boiler Makers do it on the tubes in boilers. Guys who weld in the submarines do it too. Anywhere that you can't get to the back side of the pipe.
 

Attachments

  • Shooten the gap.JPG
    Shooten the gap.JPG
    130 KB · Views: 145
   / Welded a Cat 650 Dozer stack (MIG)
  • Thread Starter
#45  
now THATS a reacharound!
 
   / Welded a Cat 650 Dozer stack (MIG) #47  
When welding 6-G pipe with the Tig process, you have to be equally good with both hands.
When welding the right side of the pipe, the Tig torch is in your left hand. When welding the left side of the pipe, the Tig torch is in your right hand.
 
   / Welded a Cat 650 Dozer stack (MIG) #48  
When welding 6-G pipe with the Tig process, you have to be equally good with both hands.
When welding the right side of the pipe, the Tig torch is in your left hand. When welding the left side of the pipe, the Tig torch is in your right hand.
Forget it... my good hand isn't good.
 

Tractor & Equipment Auctions

2018 PJ 40T/A GOOSENECK TRAILER (A50854)
2018 PJ 40T/A...
20Yd Roll-Off Container Dumpster (A49346)
20Yd Roll-Off...
2016 Kia Optima Sedan (A48082)
2016 Kia Optima...
1989 Freightliner FLD120 (NEW CAT 3406A, NEW REAR ENDS, CLUTCH) (A51039)
1989 Freightliner...
2018 Toyota RAV4 Hybrid XLE AWD SUV (A50324)
2018 Toyota RAV4...
2016 Ford F550 4x4 Bucket Truck with Altec AT41 - 46FT Rotating Bucket and Jib Winch (A51039)
2016 Ford F550 4x4...
 
Top