W. R. Long

[Will S]

To get the grapple and bucket to work at the same time you may need to have the third function valve in front of the loader valve on your tractor.

Plumbed right into the power beyond port ahead of the SCV loader, per W.R.'s instructions. It's the matter of having (or not having) enough flow for both functions, at the full range of engine speeds. There's lots of posts on the web about it. When you get into larger 4 and 5 series tractors with larger hydro pumps more gpm), it works as expected.

If I run my engine at or near WOT, I can do simultaneous lift and clamp.

 

[orangetree]

I had some technical questions above and beyond installing my WRLong 3rd function. Brandon was beyond helpful. Highly recommend

power beyond flow to 3rd function valve - before vs after the rear-remotes valve?

I'm installing a power beyond. I'm asking this question from a generic point of view, as I want to understand the hydraulic system as much as I just want to get it done (I find that sort of understanding will pay dividends later). That said, my unit is a ck2610, with factory loader and dual...

www.tractorbynet.com