Poncho
Gold Member
click on "specs", but 1k bed payload, 1,450 vehicle payload and 2500 towing: https://intimidatorutv.com/gc1k-stage-1/Do you have a link to specs, or can you tell me the max payload and max towed load?
click on "specs", but 1k bed payload, 1,450 vehicle payload and 2500 towing: https://intimidatorutv.com/gc1k-stage-1/Do you have a link to specs, or can you tell me the max payload and max towed load?
Love that scissor lift, wish mine had thatI have a JDM truck, a 94 Daihatsu Hijet, which I have raised a couple of inches.
I bought it to carry a snow plow in the winter. A vehicle with a real enclosed cab, windows, wipers and a heater is much more enjoyable than any ATV/UTV for plowing snow.
I put a bit of a lift, and heavier springs on the front, after the first time I trial fitted the plow, and the front springs bottomed out. I added a leaf to the rear when I weighed both axles with the plow mounted and figured out that I needed to add about 400 to 500-lbs, to the back to get the weight distribution back to 50-50, and to bring the rear even with the front.
As said, they are quite capable at low speeds off road, but are not anything you can run at speed and go jumping over bumps, and catching big air in. I out grew that in my thirties. So, not an issue with me.
Mine has a scissors dump bed, so it can raise vertically, as well as dump. The highway legal load in Japan is 350kg, (800-lbs). However Daihatsu imported them, as utility vehicles in the eighties, and early nineties, and they said they could carry 1500-lbs, at speeds below 15-mph.
For around the place, and putting around town on city and county roads, I much prefer it to any of the ATVs I have driven. We have a Razor at work we use to cruise old timber sale roads, when we are figuring out what it will take to open them up for new timber sales, or use as fire breaks/roads. I am certain the tiny truck is fully capable of doing 90% of that work. But it wouldn’t do it as fast.
When I built the bumper to mount the snow plow, I put 2-inch reciever on the miidle, and both ends. I have a polarized lead to power the plow, and set up a 4500-lb winch to mount in the receivers, and hook to the same power feed. I made the rear bumpers the same, and ran a power feed to the rear bumper. I can mount the winch on all four corners and the middle at both ends. So, I can get a good angle to pull on most things. Add an electric chain saw, hilift and tire patch kit and I’m ready to, go play in the woods.
View attachment 745965View attachment 745966
Thanks for posting these. Miss my Jk, looking at getting a JL in the near future. And yes, it will see trails.
I will second the Kawasaki Mule suggestion. We have been happy with ours.i had a Ranger 850 with Cab. I had tracks on it one winter and sold them. Your speed is cut in half with them on and you drive around with the engine screaming away. I also had a RZR 570 and it was fun but useless.
My buddy bought a 570 and sold it after one year. It has transmission issues and was loud.
You will spend a lot of money for what you are looking for so test drive as many as you can and realize you will need to compromise.
Last year, we got the "cheap" Kawasaki Mule SX. Less than $7000 on sale. It is slow (25 mph) but has been very handy. We cruise a lot of old logging trails where speed is too dangerous anyway, visit neighbors, yard work, and run up and down the 200 yard range. We have been happy with it. Kawasaki is the only company to offer a three year warranty.
Your plan to get a RZR 170 for the kids to tag along with may be not work out well. If they are following you, they will be eating dust depending on the type of roads/trails you are running.
BTW, we have snowmobiles for fun riding in the winter. UTV's are not good in the snow and like I said, the tracks suck and add another $4500...get a good winch.
One last thought. If your trails permit, look at a used Jeep Wrangler. It will seat four (cramped in the back but good for kids), and will outlast any UTV. We had one for a couple of years and it handled our trails very well.
Does your Jeep have a dump bed? No? Then just stop comparing them to a UTV.
Different tools for different jobs. Sorry, to be short but it gets pretty annoying going to threads to get thoughts on UTVs and every one of them has a jeep or mini truck fan trying to suggest they are the same. Start a thread on jeeps or mini trucks. They have roles, but being a UTV is not one of them for most applications.
Believe me, I understand the need for a dump trailer. I have one ATV sized one, and an other for use behind my tractor or pick up truck.No doubt it is a handy space to throw crap into
Just not the machine selling point or what defines the machine for me.
When I want/need a dump bed, it isn’t for mulch or a chainsaw
(More specifically, the “dump” feature in a very light duty bed/system is not a “selling point” and do agree that the utv should have some means to at least carry equipment)
A Defender is on my want list for sure!!!! It think they are the Cadillac of UTVs.I will repeat what I've said before. It all depends on how you want to use your UTV.
The below roads can easily be driven in a Jeep. But you'll drive them at crawling speeds, bouncing and tossing around, and after a few miles you'll feel like you've been beat with a stick. A UTV, with its 4-wheel independent soft suspension and tires that are inflated to only 10 psi, will cover these roads at a faster pace and the ride will be very smooth and comfortable.
View attachment 772856
View attachment 772857
I've been a Jeep owner for most of my life - and I'll be 80 soon. My current Jeep is a 2006 Wrangler Rubicon. I've been a UTV owner (Can-am Defender) for only a couple years but the difference in ride on rough roads between Jeep and Defender is still startling.