Using loader scv for rear hitch attachments.

/ Using loader scv for rear hitch attachments. #1  

Hawgheaven101

New member
Joined
Jan 22, 2011
Messages
9
Tractor
Mahindra MAX28XL
Would it be ok to remove my FEL and use the joist stick to operate rear attachments, I.e. Pull behind brush mower to raise and lower the unit with the hyd lift cylinder?
 
/ Using loader scv for rear hitch attachments. #2  
Yes, you can run other equipment with the joy stick. Just use caution when running the hoses to the rear to prevent them from catching or rubbing on something.
 
/ Using loader scv for rear hitch attachments.
  • Thread Starter
#3  
Out of couriosity if I put the lever in float will it run a wood splitters two way motion?
 
/ Using loader scv for rear hitch attachments. #4  
No, there is no flow of oil in the float position. But you can bungee the joystick to keep the flow going and use the valve that's on most 3PH splitters.
 

Marketplace Items

2007 Blue Bird All American Bus (A61573)
2007 Blue Bird All...
JOHN DEERE 8' OFFSET DISC HARROW (A64276)
JOHN DEERE 8'...
2011 INTERNATIONAL TERRASTAR SERVICE TRUCK (A64276)
2011 INTERNATIONAL...
2022 Magni TH5 5.19P (A63689)
2022 Magni TH5...
2026 Kearney 7'x20' Trailer (A64119)
2026 Kearney...
John Deere 348 Square Baler (A65579)
John Deere 348...
 
Top