Using loader scv for rear hitch attachments.

   / Using loader scv for rear hitch attachments. #1  

Hawgheaven101

New member
Joined
Jan 22, 2011
Messages
9
Tractor
Mahindra MAX28XL
Would it be ok to remove my FEL and use the joist stick to operate rear attachments, I.e. Pull behind brush mower to raise and lower the unit with the hyd lift cylinder?
 
   / Using loader scv for rear hitch attachments. #2  
Yes, you can run other equipment with the joy stick. Just use caution when running the hoses to the rear to prevent them from catching or rubbing on something.
 
   / Using loader scv for rear hitch attachments.
  • Thread Starter
#3  
Out of couriosity if I put the lever in float will it run a wood splitters two way motion?
 
   / Using loader scv for rear hitch attachments. #4  
No, there is no flow of oil in the float position. But you can bungee the joystick to keep the flow going and use the valve that's on most 3PH splitters.
 

Tractor & Equipment Auctions

Utility Trailer (A52377)
Utility Trailer...
2023 54' Hooklift Dumpster 20 Cubic Yard (A53422)
2023 54' Hooklift...
Behlen 150 Gallon Premium Stock Tank (A55218)
Behlen 150 Gallon...
2018 FORD F-450 XL FLATBED TRUCK (A51406)
2018 FORD F-450 XL...
2022 JOHN DEERE 333G SKID STEER (A52705)
2022 JOHN DEERE...
Leeboy 685 Grader (A47477)
Leeboy 685 Grader...
 
Top