Upgrading from JD 870 to JD 3x20 series
- Thread starter Sukee
- Start date
- Views: 6928
-
- Tags
- john deere 870
WH401
Platinum Member
I think he means he sold it a while ago, that picture is just 1 he had up during it's sale.
dirtworksequip
Veteran Member
- Joined
- Jun 3, 2006
- Messages
- 1,463
- Location
- Wheeling, WV
- Tractor
- 2006 JD 3520 w/cab & 300CX loader. 1995 JD 870 w/440 loader & 8b backhoe.JD 455 w/54" mower deck.
Sukee, yes I sold it awhile back and that was just one of the listing pictures. I know that itch well and you will probably have a powerful urge to satisfy it. Go luck with your new tractor if you decide to go that route.
Sincerely, Dirt
Sincerely, Dirt
debushau
Bronze Member
I found the 3520 to be somewhat unstable on slopes initially but after putting the wheels in the wider setting, getting some wheel weights and always running with something on the back (ballast box or whatever), it seems fine or maybe I'm just used to it. The tires are loaded R-4's.
Not sure what makes the 3x20 less stable feeling - maybe it's the fact that it uses relatively small tires for its height?
Not sure what makes the 3x20 less stable feeling - maybe it's the fact that it uses relatively small tires for its height?
It is a few inches taller than the 4310 and the rear axle appears to be 2" slimmer. I went with some Turf Specials on all 4 wheels and that did the trick for me without any fluid in the tires. I also have another set of tires, R4's and they are loaded - rears..
