Up date on PTO problem. searching for owners of ........

   / Up date on PTO problem. searching for owners of ........ #1  

rabet

Bronze Member
Joined
Apr 29, 2017
Messages
66
Location
malaysia
Tractor
ferguson
Hi all, I am searching for anyone who has a :- Ford 1300, 1310, 1500, 1510 and 1710 with single plate clutch, as according to the Ford manual they were fitted with the 'One - way clutch assembly". and my question to you is, when standing facing the PTO shaft, with engine off and PTO disengaged, can you turn the PTO shaft by hand in both anti clockwise and clockwise direction. Lastly with PTO engaged which direction can you turn the PTO by hand.

Many thanks to anyone who can advise.
Rabet.
 
   / Up date on PTO problem. searching for owners of ........ #2  
With the PTO engaged, you should be able to turn the PTO shaft by hand on the clockwise direction but should lock in the anti clockwise direction. As long as the one way clutch is working right that is.

With the PTO disengaged/in neutral, you can spin it by hand in both directions.
 
   / Up date on PTO problem. searching for owners of ........
  • Thread Starter
#3  
Firstly, thank you for your reply, much appreciated.
The details you have written is exactly how my PTO performs. But when I select PTO with engine running it will turn a few times then stop, then might start again. When it is turning you cannot stop it by hand.
Do you have any idea what could be causing my problem, where to look and for what ?

Thanks Rabet
 

Tractor & Equipment Auctions

9ft x 7ft Shipping Container with Side Door (A51573)
9ft x 7ft Shipping...
1989 Freightliner Cabover FLA086 (A53472)
1989 Freightliner...
New/Unused Two Post Car Lift 10,000lbs (A51573)
New/Unused Two...
City of Buckhannon -Onan 50 Set Stand By Generator (A52384)
City of Buckhannon...
7ft Dozer Blade Skid Steer Attachment (A51573)
7ft Dozer Blade...
2015 VOLVO VNL TANDEM AXLE SLEEPER (A52577)
2015 VOLVO VNL...
 
Top