Troybilt horse tiller

   / Troybilt horse tiller #1  

Mazyck

New member
Joined
May 27, 2013
Messages
1
Location
Eaton Rapids, MI
Tractor
Troybilt / Horse
I bought this tiller unassembled. I'm looking for spec for the engine mount pins. I know they are made from 3/4" round stock with threaded hole in the top, I don't know about the machining mid-way along side for adjusting and holding the pin in the unit. Can anyone help me.
 
   / Troybilt horse tiller #2  
I think Troybilt is still in business so you may want to check with them tomorrow.
 
   / Troybilt horse tiller #3  
You may not need the top hole, unless you have a brush guard. The side has a shallow hole the bolt goes into. It isn't tightened, but is allowed to float a bit.

Bruce
 
   / Troybilt horse tiller #4  
I can measure mine tomorrow.... I would say there is a indentation exactly halway down the shaft that recieves the bolt.
 
   / Troybilt horse tiller #5  
Those shafts are available new for $19.95 from us. Let me know if you have specific questions.
Tim
 

Tractor & Equipment Auctions

Kubota SVL95-2 High Flow Cab Skid Steer (A52748)
Kubota SVL95-2...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2018 CATERPILLAR 279D SKID STEER (A51246)
2018 CATERPILLAR...
ARMSTRONG  10 FT DISC (A52472)
ARMSTRONG 10 FT...
CPS 185 KD8 PORTABLE AIR COMPRESSOR (A52472)
CPS 185 KD8...
1267 (A50490)
1267 (A50490)
 
Top