Transmission problem

3RRL · Aug 21, 2007

Mine definitely only runs when the tractor is running...and sometimes not even then hahaha.
Shortly after I first got my Kama, the entire instrument panel did not work for a couple months until I traced it to a loose ground connection at the head lights! So I lost at least 35 - 40 hours on the meter...maybe more? It is also the rpm tach sensor type. That is, it registers less hours when running less than rated rpm in the "green" zone. Because I run the tractor mostly between 1200 to 1700 rpm, in reality, I have many more actual hours on the tractor than the clock says.

zogman · Aug 21, 2007

greg_g said:
Not on mine. Have you checked your wiring?

//greg//

No, didn't know any different until now! It worked like that since it was new when I bought it. It doesn't bother me though, it appears to keep the hours right - I just double check to make sure I cut the key to the OFF position. One of these days I'm going to re-do some of these harnesses but for now they will do.

zogman · Aug 21, 2007

3RRL said:
Mine definitely only runs when the tractor is running...and sometimes not even then hahaha.
Shortly after I first got my Kama, the entire instrument panel did not work for a couple months until I traced it to a loose ground connection at the head lights! So I lost at least 35 - 40 hours on the meter...maybe more? It is also the rpm tach sensor type. That is, it registers less hours when running less than rated rpm in the "green" zone. Because I run the tractor mostly between 1200 to 1700 rpm, in reality, I have many more actual hours on the tractor than the clock says.

Is there a simple inexpensive aftermarket hour meter I could purchase and mount on the tractor?

3RRL · Aug 21, 2007

Sorry ECRob, I don't know for sure, but my guess would be yes. I'd check with an automotive, truck or tractor place. Maybe start with a Napa parts store? Or check online for something that works on your tractor.